On weight of fiber

Moisture content can be expressed on a wet basis (kg moisture per kg of fiber plus moisture, or on a dry basis (kg moisture per kg dry weight of fiber). The dry basis will be used throughout this book. 

Finish should be applied before the tow enters the dryer or heat setter. Finish should be selected based on the planned downstream processing [5a]. Depending on the subsequent processing and finish types, application levels can range from 0.35% up to 0.8% of the weight of fiber [4]. 

The differences in the amino acid chemistry of the hide coUagen and the hair keratin are the basis of the lime-sulfide unhairing system. Hair contains the amino acid cystine. This sulfur-containing amino acid cross-links the polypeptide chains of mature hair proteins. In modem production of bovine leathers the quantity of sulfide, as Na2S or NaSH, is normally 2—4% based on the weight of the hides. The lime is essentially an unhmited supply of alkah buffered to pH 12—12.5. The sulfide breaks the polypeptide S—S cross-links by reduction. Unhairing without sulfide may take several days or weeks. The keratin can be easily hydrolyzed once there is a breakdown in the hair fiber stmcture and the hair can be removed mechanically. The coUagen hydrolysis is not affected by the presence of the sulfides (1—4,7). 

Chemical binders are appHed to webs in amounts ranging from about 5 to 60 wt %. In some instances when clays (qv) or other weight additives ate included, add-on levels can approach or even exceed the weight of the web. Waterborne binders ate appHed by spray, saturation, print, and foam methods. A general objective of each method is to apply the binder material in a manner sufficient to interlock the fibers and provide chemical and mechanical properties sufficient for the intended use of the fabfic. 

Plant-fiber identification is described in TAPPI T8 and TIO. In order to identify synthetic fibers, it usually is necessary to conduct solubihty and physical properties tests in addition to light microscopy observations. Systematic sampling is required to obtain quantitative information on sample composition. Because different types of pulps contain varying numbers of fibers per unit weight, it is necessary to multiply the total number of each kind of fiber by a relative weight factor, thereby the weight percentage that each fiber type contributes to the sample can be deterrnined. 

---