What Must be Done

Following are some specific actions which must be taken if we wish to alleviate hunger and poverty  

---

The calculation involved here is conceptually a complex one, and for the necessarily detailed discussion needed to do it justice, the reader is referred to Verwey and Overbeek [5] and Kruyt [6] or to Hamed and Owen [10]. Qualitatively, what must be done is to calculate the reversible electrostatic work for the process ... 

Processing instructions. This is what must be done with the stuff in order to make the desired product. 

What must be done is establish the maximum flow, and the minimum flow, and implement controls. Regarding filters, you ve got to establish the flow and pressure (resistance) that corresponds to the new, clean filter, and determine the flow and resistance that represents the dirty filter and its moment for replacement. These points must be predetermined. The visual graph of the system eurve with its dynamie resistances are seen in this example filtering and recirculating a liquid in a tank. Consider the following graphs (Figures 8-18 and 8-19). 

What must be done to a 2s electron to make it a 3s electron What happens when a 3s electron becomes a 2s electron ... 

Documentation is another essential ingredient in all quality systems. It serves as a mantra for auditors and inspectors that ... if it is not documented it does not exist or it never happened . The documentation requirements can be split into two main categories (i) procedures outlining what must be done and (ii) records showing what has been done. 

The manner in which toxicological knowledge must work together with the knowledge of human behavior, fire dynamics, and chemistry to produce an acceptable level of fire safety is proposed. A hypothetical example illustrates what must be done with adequate accuracy in order to design fire safety to a performance code. The example may give the impression that this can already be done. In fact, each computer code used contains dozens of assumptions, some very crude, so that the accuracy of present predictions are unacceptably low. 

Requirements What must be done, as opposed to how it is to be achieved... 

Make As-Is and To-Be Models. This can be done at several levels business, system requirements, and system design.4 The as-is model keeps fairly strictly to what exists at the present. (Because of ad-hoc changes over the years, it may be horrible. You re allowed some omissions when early reworking is an obvious necessity.) The to-be model is your vision of the ideal future. In practice, you should also make an intermediate near-term objective. It is often useful to abstract from the as-is model a truly essential model of what must be done the as-is was the previous refinement of this model, and the to-be will be an alternative, improved refinement (see Figure 13.6). 

Shalala, D. (2000). Protecting research subject—What must be done. N. Engl. J. Med., 343... 

Go to him always with a question held in your mind. Every journey must have a purpose. When before him, hold your question gently, then reach out in mind and spirit to him, the Dweller on the Mountain, Menes, the Hermit, the Magus of Power. Expand your aura to encompass him and he will embrace you within his. Then, as your mental concept is put forth in this way, you will find that it is being adjusted and altered to another pattern, as the mind of Menes informs it, until there wells up in your own mind the knowledge of what must be done by you in order to bring this teaching into actual use and power. It is a high telepathic communion, mind to mind, whose effects will work out in whatever problems you may have placed before the Hermit, the personification of the Divine Will. 

What must be done to a sample if it is too concentrated for the chosen method What must be done if it is too dilute ... 

Explain what must be done to calculate each mass value that is not measured directly. 

The reason for these substantial errors is quite simply that in a discontinuous assay, the researcher assumes that product formation remains (approximately) linear for the duration of the incubation period. Although this may hold true for high substrate concentrations (in this example), it is clear from continuous data that deviation from linearity is substantial at lower substrate concentrations. Accordingly, what must be done prior to use of a discontinuous assay protocol is a timecourse assessment, in which the concentration of product formed from both low and high concentrations of substrate is determined at various time... 

Rappaport, Brett. (1993). As natural landscaping takes root we must weed out the bad laws How natural landscaping and Leopold s land ethic collide with unenlightened weed laws and what must be done about it. The John Marshall Law Review. 26(4). (http // www.epa.gov/greenacres/weedlaws/index.html) (Last accessed February, 2007)... 

Clearly, this format takes more time to write, but consider the benefit to the student challenged to calculate an enthalpy change resulting from an isobaric and isoplethic heating. The expression itself tells the student what must be done, the initial and final temperatures must be known and an expression for a change in enthalpy depending only on temperature must be found because pressure and composition are constant. What does AH tell the student Push this example further. 

The NO molecule illustrates what must be done with a single unpaired electron on the central atom [see predictive rule 2(c), p 119). It must occupy a molecular orbital but, unlike the usual situation, the orbital won t be filled. In... 

Because the objective of the protocol was not only to get a quantitative elemental analysis, but also to keep the sample size as small as possible, EDS must be considered as preliminary test for elemental analysis by ICP-MS or ICP-OES, thus allowing for the chemical composition of die material to dictate what must be done next... 

Annex 15 PIC/S corresponds in form and regulation depth to the EC Guidelines. As a rule, the EC-GMP Guidelines indicate what must be done, but not how it should be done. The demands shown in Annex 15 with respect to qualification and validation are sufficient to attain the goals of such regulations with present state-of-the-art technology without limiting the manufacturer in his possibilities. 

The algorithm uses a numbered list of instructions, the instructions themselves are English-like statements of what must be done. Another method which is useful for specifying small algorithms is the flow chart. A flow chart consists of flow chart symbols connected by arrows. Each symbol will have information about what must be done at the point and the arrows indicate the... 

Geologic and hydrogeologic conditions are perhaps the most important factors in establishing the environmental suitability of the area for a landfill site. Data on these factors are required to assess the pollution potential of the proposed site and to establish what must be done to the site to control the movement of leachate or gases from the landfill. 

As stated above, the validation plan is a crucial document. From experience, the best method to create the plan is to set up a small team, consisting of the user, system expert, and quality assurance representative. The plan will include the results of the risk and software category assessments as well as any additional requirements determined by the supplier audit. The plan will state what documents are required, when they will be produced (i.e., in what order), and by whom. The validation plan will state what must be done in order to confirm that a system will be validated. 

The algorithm just discussed is a qualitative version of what must be done for each particle detectable above the noise level at both 6° and 12°. In reality the allowable 3° signal range depends on the observed 12°/6° ratio. Thus any data acquisition technique must be able to observe the 12°/6° ratio, to calculate a corresponding allowable 3°/6° ratio for comparison with that actually measured, and finally to decide on the validity of the particle based on this comparison. 

This is a straightforward problem, but the number of intermediate calculations required to solve it might make it appear more difficult than it is. Let us summarize what must be done. 

The extension of the temporal-hybrid method to mixtures is conceptually straightforward. What must be done for a binary mixture is to separately compute and fit the 1-2, 2-2 and 1-2 interactions, and use the potentials obtained in simulation. 

Figure 5-22. Valve alignments. In the correct example, the user has no doubt as to which pieces of equipment should be operated and what must be done.

---