Water dissolving metals

This is all the more surprising as the history of the oxo process actually prescribed the use of aqueous catalysts and catalyst precursors (aqueous cobalt salts as precursors of the earlier Diaden process [21], the at least partially aqueous cycle of the BASF and Kuhlmann process [22b], or the cleavage of solvent-soluble by-products and heavy ends of the oxo process with the aid of water-dissolved metal salts [22c, 23]). 

Boron III) oxide, B2O3, is obtained by ignition of boric acid. Combines with water to reform B(0H)3. The fused oxide dissolves metal oxides to give borates. 

Sulphur dioxide, SO2, m.p. — 72-7°C, b.p. — I0"C. Colourless gas with characteristic smell. Formed by burning S, metal sulphides, H2S in air or acid on a sulphite or hydrogen sulphite. Powerful reducing agent, particularly in water. Dissolves in water to give a gas hydrate the solution behaves as an acid - see sulphurous acid. Used in the production of SO3 for sulphuric acid. 

The metal has a silvery appearance and takes on a yellow tarnish when slightly oxidized. It is chemically reactive. A relatively large piece of plutonium is warm to the touch because of the energy given off in alpha decay. Larger pieces will produce enough heat to boil water. The metal readily dissolves in concentrated hydrochloric acid, hydroiodic acid, or perchloric acid. The metal exhibits six allotropic modifications having various crystalline structures. The densities of these vary from 16.00 to 19.86 g/cms. 

Colorless crystals of iron(II) fluoride tetrahydrate [13940-89-1Fep2 4H2O, can be obtained by dissolving metallic iron or the anhydrous salt in hydrofluoric acid. The crystals of Fep2 4H2O are sparingly soluble in water and decompose to Fe202 when heated in air. 

Lead nitrate [10099-74-8] Pb(N02)2, mol wt 331.23, sp gr 4.53, forms cubic or monoclinic colorless crystals. Above 205°C, oxygen and nitrogen dioxide are driven off, and basic lead nitrates are formed. Above 470°C, lead nitrate is decomposed to lead monoxide and Pb O. Lead nitrate is highly soluble in water (56.5 g/100 mL at 20°C 127 g/100 mL at 100°C), soluble in alkalies and ammonia, and fairly soluble in alcohol (8.77 g/100 mL of 43% aqueous ethanol at 22°C). Lead nitrate is readily obtained by dissolving metallic lead, lead monoxide, or lead carbonate in dilute nitric acid. Excess acid prevents the formation of basic nitrates, and the desired lead nitrate can be crystallized by evaporation. 

Process water streams from vinyl chloride manufacture are typically steam-stripped to remove volatile organics, neutralized, and then treated in an activated sludge system to remove any nonvolatile organics. If fluidized-bed oxychlorination is used, the process wastewater may also contain suspended catalyst fines and dissolved metals. The former can easily be removed by sedimentation, and the latter by precipitation. Depending on the specific catalyst formulation and outfall limitations, tertiary treatment may be needed to reduce dissolved metals to acceptable levels. 

Cla.riGers. Pool water may occasionally contain metallic impurities such as copper, iron, or manganese which enter the pool with the makeup water or by corrosion of metallic parts in the circulation system. These dissolved metals can discolor the water and cause stains. Chlorine oxidizes soluble Fe and to the highly insoluble Fe(OH)3 and MnO which can be removed by filtration. Water-soluble, high molecular weight polymers can be... 

Examples include hydrochloric acid, nitric acid, and sulphuric acid. These are strong acids which are almost completely dissociated in water. Weak acids, such as hydrogen sulphide, are poorly dissociated producing low concentrations of hydrogen ions. Acids tend to be coiTosive with a sharp, sour taste and turn litmus paper red they give distinctive colour changes with other indicators. Acids dissolve metals such as copper and liberate hydrogen gas. They also react with carbonates to liberate carbon dioxide ... 

Chemical Reactivity - Reactivity with Water. Dissolves and forms a weak solution if nitric acid. The reaction is not hazardous Reactivity with Common Materials May corrode metals in presence of moisture Stability During Transport Stable Neutralizing Agents for Acids and Caustics Flush with water Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

Of the anhydrous dihalides of iron the iodide is easily prepared from the elements but the others are best obtained by passing HX over heated iron. The white (or pale-green) difluoride has the rutile structure the pale-yellow dichloride the CdCl2 structure (based on cep anions, p. 1212) and the yellow-green dibromide and grey diiodide the Cdl2 structure (based on hep anions, p. 1212), in all of which the metal occupies octahedral sites. All these iron dihalides dissolve in water and form crystalline hydrates which may alternatively be obtained by dissolving metallic iron in the aqueous acid. 

Step C Preparation ofthebase-A 300 ml one-necked, round-bottomed flask, equipped with a water-cooled condenser, calcium chloride tube and magnetic stirrer is charged with anhydrous methanol (150 ml) and sodium metal (5.75 g,0.25 g atom). When the reaction is complete, the solution is treated with dry guanidine hydrochloride (26.3 g, 0.275 mol) and stirred for 10 minutes. The sodium chloride that forms is removed by filtration. The solution is concentrated in vacuo to a volume of 30 ml and the residue treated with the product of Step B, heated one minute on a steam bath and kept at 25°C for 1 hour. The product is filtered, washed well with water, dissolved In dilute hydrochloric acid and the free base precipitated by addition of sodium hydroxide to give the amllorlde product base, a solid which melts at 240.5°-241.5°C. 

An initial solution was prepared by dissolving metallic niobium powder in 40% hydrofluoric acid. The dissolution was performed at elevated temperature with the addition of a small amount of nitric acid, HN03, to accelerate the process. The completeness of niobium oxidation was verified by UV absorption spectroscopy [21]. The prepared solution was evaporated to obtain a small amount of precipitate, which was separated from the solution by filtration. A saturated solution, containing Nb - 7.01 mol/1, HF - 42.63 mol/1, and corresponding to a molar ratio F Nb = 6.08, was prepared by the above method. The density of the solution at ambient temperature was p = 2.0 g/cc. Concentrations needed for the measurements were obtained by diluting the saturated solution with water or hydrofluoric acid. 

The water molecules in the inner hydration sphere can undergo dissociation reactions just as water molecules far from a dissolved metal ion... 

---