Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Expansion volume

The volume expansion, PT, of mercury may be calculated over its entire Hquid range by... [Pg.105]

Calculated from density at 25 °C and volume expansion at elevated temperatures. Ref. 2. [Pg.93]

The primary site of action is postulated to be the Hpid matrix of cell membranes. The Hpid properties which are said to be altered vary from theory to theory and include enhancing membrane fluidity volume expansion melting of gel phases increasing membrane thickness, surface tension, and lateral surface pressure and encouraging the formation of polar dislocations (10,11). Most theories postulate that changes in the Hpids influence the activities of cmcial membrane proteins such as ion channels. The Hpid theories suffer from an important drawback at clinically used concentrations, the effects of inhalational anesthetics on Hpid bilayers are very small and essentially undetectable (6,12,13). [Pg.407]

One problem resulting from the hot-water process is disposal and control of the tailings. Each ton of oil sand in place has a volume of ca 0.45 m, which generates ca 0.6 m of tailings and gives a substantial volume gain. If the mine produces 200,000 t/d of oil sand, volume expansion represents a considerable soflds disposal problem. [Pg.359]

Diuretics are needed to return to normal the expanded extracellular volume that other antihypertensive agents produce, such as fluid retention and blood volume expansion, via compensatory mechanisms of the body. The loss of efficacy of antihypertensive agents can be restored if a diuretic is used concomitandy. In the treatment of hypertension, high ceiling or loop diuretics, such as furosemide, ethacrynic acid, and bumetanide, are no more efficacious than the thiazide-type of diuretics. In fact, these agents cause more side effects, such as dehydration, metaboHc alkalosis, etc, and therefore, should not be used except in situations where rapid elimination of duid volume is cleady indicated. [Pg.142]

Ethyl alcohol under ordinary conditions is a volatile, flammable, clear, colorless Hquid. Its odor is pleasant, familiar, and characteristic, as is its taste when suitably diluted with water. The most amazing property of ethanol is the volume shrinkage that occurs when it is mixed with water, or the volume expansion that occurs when it is mixed with gasoline. One volume of ethanol plus one volume of water results ia only 1.92 volumes of mixture. [Pg.401]

Because there is no clearance volume expansion, as in the reciprocating compressor, the volumetric efficiency is a function of the rotor slip. This is the internal leakage from the higher pressure to the lower pressure side, reducing potential volume capacity of the compressor. [Pg.100]

Fig. 12. Normalized dc electrical resistivity p(T) of single crystal KsCeo. The inset shows the p(T) behavior near the superconducting transition temperature Tc = 19.8 K [114]. The curvature in p(T) for T > Tc is due to the volume expansion of the sample [7, 4.3],... Fig. 12. Normalized dc electrical resistivity p(T) of single crystal KsCeo. The inset shows the p(T) behavior near the superconducting transition temperature Tc = 19.8 K [114]. The curvature in p(T) for T > Tc is due to the volume expansion of the sample [7, 4.3],...
FIGURE 12.27 Relative change in the volume expansion coefficient for air and water. [Pg.1183]

When prepanng mobile phase mixtures each individual component should be measured out separately and only then placed in the mixing vessel This prevents not only contamination of the solvent stock by vapors from the already partially filled mixing vessel (e g ammonia ) but also volumetnc errors caused by volume expansions or contractions on mixing... [Pg.132]

A wide variety of physical properties are important in the evaluation of ionic liquids (ILs) for potential use in industrial processes. These include pure component properties such as density, isothermal compressibility, volume expansivity, viscosity, heat capacity, and thermal conductivity. However, a wide variety of mixture properties are also important, the most vital of these being the phase behavior of ionic liquids with other compounds. Knowledge of the phase behavior of ionic liquids with gases, liquids, and solids is necessary to assess the feasibility of their use for reactions, separations, and materials processing. Even from the limited data currently available, it is clear that the cation, the substituents on the cation, and the anion can be chosen to enhance or suppress the solubility of ionic liquids in other compounds and the solubility of other compounds in the ionic liquids. For instance, an increase in allcyl chain length decreases the mutual solubility with water, but some anions ([BFJ , for example) can increase mutual solubility with water (compared to [PFg] , for instance) [1-3]. While many mixture properties and many types of phase behavior are important, we focus here on the solubility of gases in room temperature IFs. [Pg.81]

In the investigations carried out by one of the authors [56], an attempt was made to examine the conditions for the thermal volume expansivity of PET fibers. Within the framework of these investigations, aas was determined from the hydrostatic weight measurements using n-heptan as a liquid. The sought aas values have been calculated from the equation ... [Pg.851]

Table 11 Thermal Volume Expansivity (a2s) and Related Fine Structure Parameters of Differently Drawn PET Fibers... Table 11 Thermal Volume Expansivity (a2s) and Related Fine Structure Parameters of Differently Drawn PET Fibers...
Figure 7 Thermal volume expansivity coefficient ot25 of annealed PET fibers. Figure 7 Thermal volume expansivity coefficient ot25 of annealed PET fibers.
Quantite totale de gaz presente a Torigine dans un reservoir avant la mise en exploitation, exprimee en volume expanse dans des conditions normales. [Pg.42]

Much of the interest in ring-opening polymerizations stems from the fact that the polymers formed may have lower densities than the monomers from which they are derived (i.e. volume expansion may accompany polymerization).168-171 This is in marked contrast with conventional polymerizations which typically involve a nett volume contraction. Such polymerizations are therefore of particular interest in adhesive, mold filling, and other applications where volume... [Pg.194]

It should also be noted that for many of the applications where volume expansion is required (adhesives, composites, etc.) a crosslinked product is desirable and some monomers have been designed with this in mind. This does, however, make the products difficult to characterize. Some monomers with potential for double ring-opening are reported in fable 4.8. [Pg.205]


See other pages where Expansion volume is mentioned: [Pg.323]    [Pg.323]    [Pg.413]    [Pg.413]    [Pg.104]    [Pg.105]    [Pg.381]    [Pg.174]    [Pg.530]    [Pg.324]    [Pg.434]    [Pg.509]    [Pg.513]    [Pg.529]    [Pg.1]    [Pg.58]    [Pg.512]    [Pg.525]    [Pg.2304]    [Pg.37]    [Pg.458]    [Pg.170]    [Pg.1177]    [Pg.851]    [Pg.851]    [Pg.851]    [Pg.852]    [Pg.202]    [Pg.402]    [Pg.205]    [Pg.631]    [Pg.639]    [Pg.199]   
See also in sourсe #XX -- [ Pg.80 ]

See also in sourсe #XX -- [ Pg.587 ]

See also in sourсe #XX -- [ Pg.80 ]

See also in sourсe #XX -- [ Pg.720 ]

See also in sourсe #XX -- [ Pg.311 , Pg.314 ]

See also in sourсe #XX -- [ Pg.80 ]

See also in sourсe #XX -- [ Pg.169 , Pg.188 ]




SEARCH



Atoms volume expansion

Coefficient of volume expansion

Examples of Polymerization with Expansion in Volume

Excluded volume expansion

Expansion in volume

Expansivity, volume

Expansivity, volume

Free volume expansion ratio

Free volume thermal expansion coefficient

Injection solvent expansion volumes

Intravascular volume expansion, excessive

Linear vs. Volume Expansion Coefficient

Metal-ammonia solutions volume expansion

Plasma volume expansion agents

Polymerization with volume expansion

Ring-opening polymerization volume expansion

Thermal expansion volume

Thermal expansion volume coefficient

Thermal expansivity of free volume

Thermal volume expansivity

Volume Expansion and Viscosity Elevation

Volume Expansion of Liquids

Volume Expansion of Solids

Volume Expansion of the Cured Bulk Adhesive

Volume Expansion space time

Volume expansion coefficient

Volume expansion minimum

Volume expansion on melting

Volume expansion ratio

Volume expansion upon freezing

Volume expansion, contraction

Volume expansion, excessive

Volume stability (expansion) of steel slags

Volume variation expansion, contraction

Water volume expansion upon freezing

© 2024 chempedia.info