Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Vanadium illustration

Vanadium, a typical transition element, displays weU-cliaractetized valence states of 2—5 in solid compounds and in solutions. Valence states of —1 and 0 may occur in solid compounds, eg, the carbonyl and certain complexes. In oxidation state 5, vanadium is diamagnetic and forms colorless, pale yeUow, or red compounds. In lower oxidation states, the presence of one or more 3d electrons, usually unpaired, results in paramagnetic and colored compounds. All compounds of vanadium having unpaired electrons are colored, but because the absorption spectra may be complex, a specific color does not necessarily correspond to a particular oxidation state. As an illustration, vanadium(IV) oxy salts are generally blue, whereas vanadium(IV) chloride is deep red. Differences over the valence range of 2—5 are shown in Table 2. The stmcture of vanadium compounds has been discussed (6,7). [Pg.390]

The known halides of vanadium, niobium and tantalum, are listed in Table 22.6. These are illustrative of the trends within this group which have already been alluded to. Vanadium(V) is only represented at present by the fluoride, and even vanadium(IV) does not form the iodide, though all the halides of vanadium(III) and vanadium(II) are known. Niobium and tantalum, on the other hand, form all the halides in the high oxidation state, and are in fact unique (apart only from protactinium) in forming pentaiodides. However in the -t-4 state, tantalum fails to form a fluoride and neither metal produces a trifluoride. In still lower oxidation states, niobium and tantalum give a number of (frequently nonstoichiometric) cluster compounds which can be considered to involve fragments of the metal lattice. [Pg.988]

Sulphates, which form part of the ash from the combustion of many fuels, are not harmful to high-alloy steels, but can become so if reduction to sulphide occurs. This leads to the formation of low melting point oxide-sulphide mixtures and to sulphide penetration of the metal. Such reduction is particularly easy if the sulphate can form a mixture of low melting point with some other substance. Reduction can be brought about by bad combustion, as demonstrated by Sykes and Shirley , and it is obviously important to avoid contact with inefficiently burnt fuels when sulphate deposits may be present. Reduction can also be brought about in atmospheres other than reducing ones and the presence of chlorides or vanadium pentoxide has been shown to be sufficient to initiate the reaction. It has also been shown that it can be initiated by prior cathodic polarisation in fused sodium sulphate. The effect of even small amounts of chloride on oxidation in the presence of sulphate is illustrated in Fig. 7.33 . [Pg.1032]

Reactions of contaminants in the fuel or air in the combustion zone can result in the formation of compounds which can condense as molten salts onto cooler components in the system. This type of process can occur when fuels containing sulphur or vanadium are burnt. In the case of sulphur contaminants, alkali sulphates form by reactions with sodium which may also be present in the fuel or in the combustion air, and for vanadium-containing fuels low-melting-point sodium vanadates or vanadium pentoxide are produced, particularly when burning residual oils high in vanadium. Attack by molten salts has many features in common which will be illustrated for the alkali-sulphate-induced attack, but which will be subsequently shown to be relevant to the case of vanadate attack. [Pg.1064]

Loop Tests Loop test installations vary widely in size and complexity, but they may be divided into two major categories (c) thermal-convection loops and (b) forced-convection loops. In both types, the liquid medium flows through a continuous loop or harp mounted vertically, one leg being heated whilst the other is cooled to maintain a constant temperature across the system. In the former type, flow is induced by thermal convection, and the flow rate is dependent on the relative heights of the heated and cooled sections, on the temperature gradient and on the physical properties of the liquid. The principle of the thermal convective loop is illustrated in Fig. 19.26. This method was used by De Van and Sessions to study mass transfer of niobium-based alloys in flowing lithium, and by De Van and Jansen to determine the transport rates of nitrogen and carbon between vanadium alloys and stainless steels in liquid sodium. [Pg.1062]

The above considerations will be illustrated by the simultaneous determination of manganese and chromium in steel and other ferro-alloys. The absorption spectra of 0.001 M permanganate and dichromate ions in 1M sulphuric acid, determined with a spectrophotometer and against 1M sulphuric acid in the reference cell, are shown in Fig. 17.20. For permanganate, the absorption maximum is at 545 nm, and a small correction must be applied for dichromate absorption. Similarly the peak dichromate absorption is at 440 nm, at which permanganate only absorbs weakly. Absorbances for these two ions, individually and in mixtures, obey Beer s Law provided the concentration of sulphuric acid is at least 0.5M. Iron(III), nickel, cobalt, and vanadium absorb at 425 nm and 545 nm, and should be absent or corrections must be made. [Pg.712]

A somewhat more detailed study of vanadium atoms and dimers has also appeared 108). Figure 1 shows the UV-visible spectra of V and V2 as a function of vanadium concentration. Figure 2 shows a tjqiical, metal-concentration plot illustrating the aforementioned kinetic anal-... [Pg.83]

The feasibility of synthesizing oxovanadium phthalocyanine (VOPc) from vanadium oxide, dicyanobenzene, and ethylene ycol using the microwave synthesis was investigated by comparing reaction temperatures under the microwave irradiations with the same factors of conventional synthesis. The efficiency of microwave synthesis over the conventional synthesis was illustrated by the yield of crude VOPc. Polymorph of VOPc was obtained ttough the acid-treatment and recrystallization step. The VOPos synthesized in various conditions were characterized hy the means of an X-ray dif actometry (XRD), a scanning electron microscopy (SEM), and a transmission electron Microscopy (TEM). [Pg.801]

The form in which vanadium metal product is obtained is determined by the physicochemical conditions prevalent during reduction. This factor, elaborated below for vanadium production in ingot and powder forms, is typically illustrative of the calciothermy as... [Pg.380]

Vanadium forms numerous oxides, the most important of which are vanadium monoxide, vanadium sesquioxide, vanadium dioxide and vanadium pentoxide. In the earlier examples (e.g., oxides of chromium and of niobium) the enthalpy values for the aluminothermic reduction of each of the oxides was given for the purpose of illustration. Normally, the consideration can be restricted to only those oxides which are readily obtained and which can be handled freely without any special or cumbersome precautions. In the case of vanadium for example, it is sufficient to consider the reduction of the sesquioxide (V203) and the pentoxide (V2Os). The pertinent reactions are ... [Pg.395]

The conventional selective reduction of NOx for car passengers still competes but the efficient SCR with ammonia on V205/Ti02 for stationary sources is not available for mobile sources due to the toxicity of vanadium and its lower intrinsic activity than that of noble metals, which may imply higher amount of active phase for compensation. As illustrated in Figure 10.9, such a solution does not seem relevant because a subsequent increase in vanadium enhances the formation of undesirable nitrous oxide at low temperature. Presently, various attempts for the replacement of vanadium did not succeed regarding the complete conversion of NO into N2 at low temperature. Suarez et al. [87] who investigated the reduction of NO with NH3 on CuO-supported monolithic catalysts... [Pg.311]

Fig. 3.5. Specific heat of vanadium. Data from [26]. The solid line represents data taken at H = 0 and illustrates the second-order transition. The dashed curve for normal vanadium was obtained by applying a magnetic field... [Pg.76]

The phosphorus(V) oxide written in simplest form is P205, so it should be expected that there would be considerable similarity between the various "phosphates" and the "vanadates." This is precisely the case, and the various forms of "vanadate" include V043-, V2074, V3()<,3, HV042, ll2V()4, H3V04, V ()0286, and others. These species illustrate the fact that vanadium is similar in some ways to phosphorus, which is also a group V element. The numerous vanadate species can be seen to result from reactions such as the hydrolysis reaction... [Pg.380]

Important information on reaction mechanisms and on the influence of promoters can be deduced from temperature programmed reactions [2], Figure 2.8 illustrates how the reactivity of adsorbed surface species on a real catalyst can be measured with Temperature Programmed Reaction Spectroscopy (TTRS). This figure compares the reactivity of adsorbed CO towards H2 on a reduced Rh catalyst with that of CO on a vanadium-promoted Rh catalyst [13]. The reaction sequence, in a simplified form, is thought to be as follows ... [Pg.36]

These data taken together suggest that vanadium is deposited on the catalyst in three successive forms. The initial vanadium which appears on the catalyst is primarily an isolated V02+ species, presumably associated with alumina defect sites. This is followed by the diamagnetic vanadium surface phase and finally by the vanadium sulfides. This progression is illustrated by the analysis of catalyst samples taken from different positions in a reactor which had been employed in a pilot-plant treatment of a petroleum residuum (Figure 4). Note that all of... [Pg.98]

EI-EPR has also been applied in powder samples, where single crystal-like EPR spectra can be obtained for B0 observer fields which correspond to the orientations of principal values of ligand hfs tensors37. This is illustrated in Fig. 15 for a powder sample of dibenzene vanadium diluted into polycrystalline ferrocene. The hfs tensors of the twelve geometrically equivalent benzene protons are not coaxial with the g and the... [Pg.31]

A further vanadium-dinitrogen complex is represented by [ V(NPr2)3 2(/i-N2)], the molecular structure of which is illustrated in Figure 44.60... [Pg.480]

Reinmuth notation. In the electrochemical world, the sequence of electrode and/or chemical reactions that occur are described by a simple shorthand code. Simple electron-transfer reactions are called E reactions. In the same shorthand system, a multiple electron-transfer reaction such as Fe " Fe " -> Fe is an EE reaction , i.e. the product of an electron-transfer process itself undergoes a second electron-transfer process. (Note that the two electron-transfer processes might occur at the same time, in which case it is merely an E reaction.) The vanadium pentoxide system illustrated in Figure 6.14 is another example of an EE system. [Pg.169]

Inter- and intramolecular (cyclometallation) reactions of this type have been ob-.served, for instance, with titanium [408,505,683-685], hafnium [411], tantalum [426,686,687], tungsten [418,542], and ruthenium complexes [688], Not only carbene complexes but also imido complexes L M=NR of, e.g., zirconium [689,690], vanadium [691], tantalum [692], or tungsten [693] undergo C-H insertion with unactivated alkanes and arenes. Some illustrative examples are sketched in Figure 3.37. No applications in organic synthesis have yet been found for these mechanistically interesting processes. [Pg.121]

MAS NMR has now been used to study LiCo02-derived layered materials - as well as a wide range of alternative cathode materials including manganates, vanadates, and iron and vanadium phosphates. We will now discuss the application of NMR to some of these materials to illustrate the type of information that has been (and can be) obtained by using this method. [Pg.262]

However, oxidation with H2O2 in acetone resulted in a high diol selectivity with an equilibrium mixture of the cis- and trans-diols, illustrating the role of the residual acidity of the support The reaction is suggested to occur via heterolyhc cleavage of the vanadium peroxo species. Less than 0.5% leaching of the bipy complex was observed over 50 h of operation. [Pg.213]

The Figures 10.1 and 10.3 present the TPO spectra of the samples with and without metals. For the sample impregnated with 4100 ppm vanadium, it was observed the appearance of a shoulder around 680°C that translates in a 10% increase in peak C area, compared to the metal-free catalyst as illustrated in Figure 10.3. Then, the signal C located around 61TC apparently corresponds to the contaminant coke produced by the hydro-dehydrogenation properties of vanadium. [Pg.149]

TMS catalysts fell into a special category due to their exceptional resistance to poisons. In fact, the presence of sulfur compounds, the most common poison of metallic and oxide catalysts, does not decrease their catalytic activity, but is needed to maintain high activity. Sulfide catalysts are also very resistant to carbon deposition, which is illustrated by their use for converting residual oils. Arsenic, as well as nickel and vanadium contained in heavy petroleum fractions, are some of the few substances that cause significant deactivation, and this only occurs by physical blockage of pore structure in supported catalysts. [Pg.179]

Figure 11 shows the ratios of vanadium, chromium, and nickel in the top (block 1) compared with the central parts of the columns. Vanadium enrichment again is apparent. The median for the vanadium content of samples 13-19 (M2) compared with that of samples 1-12 (Mi) illustrates the differences in enrichment of the three elements. [Pg.244]

An effect of pore diffusion in residuum demetallation is illustrated in Figure 9, which shows nickel and vanadium concentration profiles measured through a catalyst pill after residuum desulfurizing service. The catalyst originally contained neither of these metals. These profiles confirm that the rate of reaction of the metal-containing molecules in the feed (particularly the vanadium compounds) is high compared with their rate of diffusion. [Pg.130]


See other pages where Vanadium illustration is mentioned: [Pg.243]    [Pg.169]    [Pg.468]    [Pg.300]    [Pg.79]    [Pg.452]    [Pg.383]    [Pg.161]    [Pg.797]    [Pg.94]    [Pg.19]    [Pg.213]    [Pg.259]    [Pg.215]    [Pg.393]    [Pg.395]    [Pg.10]    [Pg.25]    [Pg.252]    [Pg.355]    [Pg.173]    [Pg.229]    [Pg.435]    [Pg.296]    [Pg.397]    [Pg.506]   
See also in sourсe #XX -- [ Pg.44 ]




SEARCH



Supported Vanadium Oxide Catalysts as an Illustrative Example

© 2024 chempedia.info