Unsymmetrical

In a binary liquid solution containing one noncondensable and one condensable component, it is customary to refer to the first as the solute and to the second as the solvent. Equation (13) is used for the normalization of the solvent s activity coefficient but Equation (14) is used for the solute. Since the normalizations for the two components are not the same, they are said to follow the unsymmetric convention. The standard-state fugacity of the solvent is the fugacity of the pure liquid. The standard-state fugacity of the solute is Henry s constant. 

The use of Henry s constant for a standard-state fugacity means that the standard-state fugacity for a noncondensable component depends not only on the temperature but also on the nature of the solvent. It is this feature of the unsymmetric convention which is its greatest disadvantage. As a result of this disadvantage special care must be exercised in the use of the unsymmetric convention for multicomponent solutions, as discussed in Chapter 4. 

The standard-state fugacity of any component must be evaluated at the same temperature as that of the solution, regardless of whether the symmetric or unsymmetric convention is used for activity-coefficient normalization. But what about the pressure At low pressures, the effect of pressure on the thermodynamic properties of condensed phases is negligible and under such con-... 

Equations (2) and (3) are physically meaningful only in the temperature range bounded by the triple-point temperature and the critical temperature. Nevertheless, it is often useful to extrapolate these equations either to lower or, more often, to higher temperatures. In this monograph we have extrapolated the function F [Equation (3)] to a reduced temperature of nearly 2. We do not recommend further extrapolation. For highly supercritical components it is better to use the unsymmetric normalization for activity coefficients as indicated in Chapter 2 and as discussed further in a later section of this chapter. 

As discussed in Chapter 2, for noncondensable components, the unsymmetric convention is used to normalize activity coefficients. For a noncondensable component i in a multicomponent mixture, we write the fugacity in the liquid phase... 

Although the yields are often poor, especially for halides other than primary alkyl halides, it remains a valuable method for synthesizing unsymmetrical ethers. 

The idea that unsymmetrical molecules will orient at an interface is now so well accepted that it hardly needs to be argued, but it is of interest to outline some of the history of the concept. Hardy [74] and Harkins [75] devoted a good deal of attention to the idea of force fields around molecules, more or less intense depending on the polarity and specific details of the structure. Orientation was treated in terms of a principle of least abrupt change in force fields, that is, that molecules should be oriented at an interface so as to provide the most gradual transition from one phase to the other. If we read interaction energy instead of force field, the principle could be reworded on the very reasonable basis that molecules will be oriented so that their mutual interaction energy will be a maximum. 

Fig. III-9. Representative plots of surface tension versus composition, (a) Isooctane-n-dodecane at 30°C 1 linear, 2 ideal, with a = 48.6. Isooctane-benzene at 30°C 3 ideal, with a = 35.4, 4 ideal-like with empirical a of 112, 5 unsymmetrical, with ai = 136 and U2 = 45. Isooctane-

While the phase rule requires tliree components for an unsymmetrical tricritical point, theory can reduce this requirement to two components with a continuous variation of the interaction parameters. Lindli et al (1984) calculated a phase diagram from the van der Waals equation for binary mixtures and found (in accord with figure A2.5.13 that a tricritical point occurred at sufficiently large values of the parameter (a measure of the difference between the two components). 

Figure 10.3-2. The reaction ofa mono-substiluted hydrazine v/ilh an unsymmetrically substituted 1,3-dicarboiiyl compound can lead to two regioisomeric pyrazole products.

Mono-substituted and unsymmetrical di-substituted ureas may be prepared by a modification of Wohler s urea synthesis, salts of primary or secondary amines being used instead of the ammonium salt for interaction with potassium cyanate. Thus when an aqueous solution containing both aniline hydrochloride and potassium cyanate is heated, aniline cyanate is first formed, and then C,HjNH,HCl -h KCNO = C,H6NHj,HCNO -h KCl C,HsNH HCNO = C.H NHCONH, by the usual molecular rearrangement is converted into monophenyburea. 

Hood, P., 1976. Frontal solution program for unsymmetric matrices. Int. J. Numer. Methods Eng. 10, 379-399. 

By the use of 1 mol each of two different aldehydes, an unsymmetrical or mixed benzoin is obtained, for example ... 

The dibenzyl ketone has a very high b.p. (ca. 200°/21 mm.) and this remains in the flask when the unsymmetrical ketone has been removed by distillation. The dialkyl ketone has a comparatively low b.p. and is therefore easily removed by fractionation under normal pressure acetone is most simply separated by washing with water. In this way methyl benzyl ketone (R = CHj), ethyl benzyl ketone (R = CHgCH,) and n-propyl benzyl ketone (R = CHjCHjCH,) are prepared. By using hydrocinnamic acid in place of phenylacetic acid ... 

Unsymmetrical diaryls may be prepared by treating an aryl diazonium salt solution with sodium hydroxide or sodium acetate in the presence of a liquid aromatic compound. Thus 2-chlorodiphenyl is readily formed from o-chloro phenyl diazonium chloride and sodium hydroxide solution (or sodium acetate solution) in the presence of benzene ... 

Asymmetric Reduction of Unsymmetrical Ketones Using Chiral Boron Reagents Review Synthesis 1992, 605. 

There also exists an acidregioselective condensation of the aldol type, namely the Mannich reaction (B. Reichert, 1959 H. Hellmann, 1960 see also p. 291f.). The condensation of secondary amines with aldehydes yields Immonium salts, which react with ketones to give 3-amino ketones (=Mannich bases). Ketones with two enolizable CHj-groupings may form 1,5-diamino-3-pentanones, but monosubstitution products can always be obtained in high yield. Unsymmetrical ketones react preferentially at the most highly substituted carbon atom. Sterical hindrance can reverse this regioselectivity. Thermal elimination of amines leads to the a,)3-unsaturated ketone. Another efficient pathway to vinyl ketones starts with the addition of terminal alkynes to immonium salts. On mercury(ll) catalyzed hydration the product is converted to the Mannich base (H. Smith, 1964). 

If a Michael reaction uses an unsymmetrical ketone with two CH-groups of similar acidity, the enol or enolate is first prepared in pure form (p. llff.). To avoid equilibration one has to work at low temperatures. The reaction may then become slow, and it is advisable to further activate the carbon-carbon double bond. This may be achieved by the introduction of an extra electron-withdrawing silyl substituent at C-2 of an a -synthon. Treatment of the Michael adduct with base removes the silicon, and may lead as well to an aldol addition (G. Stork, 1973, 1974 B R.K. Boeckman, Jr., 1974). 

Regioselectivity becomes important, if unsymmetric difunctional nitrogen components are used. In such cases two different reactions of the nitrogen nucleophile with the open-chain educt may be possible, one of which must be faster than the other. Hydrazone formation, for example, occurs more readily than hydrazinoLysis of an ester. In the second example, on the other hand, the amide is formed very rapidly from the acyl chloride, and only one cyclization product is observed. 

Out first example is 2-hydroxy-2-methyl-3-octanone. 3-Octanone can be purchased, but it would be difficult to differentiate the two activated methylene groups in alkylation and oxidation reactions. Usual syntheses of acyloins are based upon addition of terminal alkynes to ketones (disconnection 1 see p. 52). For syntheses of unsymmetrical 1,2-difunctional compounds it is often advisable to look also for reactive starting materials, which do already contain the right substitution pattern. In the present case it turns out that 3-hydroxy-3-methyl-2-butanone is an inexpensive commercial product. This molecule dictates disconnection 3. Another practical synthesis starts with acetone cyanohydrin and pentylmagnesium bromide (disconnection 2). Many 1,2-difunctional compounds are accessible via oxidation of C—C multiple bonds. In this case the target molecule may be obtained by simple permanganate oxidation of 2-methyl-2-octene, which may be synthesized by Wittig reaction (disconnection 1). 

Unsymmetrically substituted dipyrromethanes are obtained from n-unsubstitued pyrroles and fl(-(bromomethyl)pyiToIes in hot acetic acid within a few minutes. These reaction conditions are relatively mild and the o-unsubstituted pyrrole may even bear an electron withdrawing carboxylic ester function. It is still sufficiently nucleophilic to substitute bromine or acetoxy groups on an a-pyrrolic methyl group. Hetero atoms in this position are extremely reactive leaving groups since the a-pyrrolylmethenium( = azafulvenium ) cation formed as an intermediate is highly resonance-stabilized. 

A mild procedure which does not involve strong adds, has to be used in the synthesis of pure isomers of unsymmetrically substituted porphyrins from dipyrromethanes. The best procedure having been applied, e.g. in unequivocal syntheses of uroporphyrins II, III, and IV (see p. 251f.), is the condensation of 5,5 -diformyldipyrromethanes with 5,5 -unsubstituted dipyrromethanes in a very dilute solution of hydriodic add in acetic acid (A.H. Jackson, 1973). The electron-withdrawing formyl groups disfavor protonation of the pyrrole and therefore isomerization. The porphodimethene that is formed during short reaction times isomerizes only very slowly, since the pyrrole units are part of a dipyrromethene chromophore (see below). Furthermore, it can be oxidized immediately after its synthesis to give stable porphyrins. 

With the catalysis of strong Lewis acids, such as tin(IV) chloride, dipyrromethenes may aiso be alkylated. A very successful porphyrin synthesis involves 5-bromo-S -bromomethyl and 5 -unsubstituted 5-methyl-dipyrromethenes. In the first alkylation step a tetrapyrrolic intermediate is formed which cyclizes to produce the porphyrin in DMSO in the presence of pyridine. This reaction sequence is useful for the synthesis of completely unsymmetrical porphyrins (K.M. Smith, 1975). 

Chlorophyll a (L.P. Vernon, 1966) contains an unsymmetrical porphyrin chromophore with two special features the double bond between C-17 and C-18 is hydrogenated and carhon atoms 13 and 15 hear a carboxylated, isocyclic cyclopentanone ting E. 

The facile insertion of CO takes place. The 2-aryl-3-indazolone 484 is obtained in high yields from the azobenzene complex 463 in alcohol or waterf442]. For unsymmetrically substituted 4-methyl, 4-chloro-, and 4-meth-... 

Both chlorines of 1,1-dichloroethylene (340) react stepwise with different terminal alkynes to form the unsymmetrical enediyne 341 [250]. The coupling of the dichloroimine 342 with tin acetylide followed by hydrolysis affords the dialkynyl ketone 343[2511. The phenylthioimidoyl chloride 344 undergoes stepwise reactions with two different tin acetylides to give the dialkynylimine 345[252],... 

The alkynyl iodide 359 undergoes cross-coupling with a terminal alkyne to give the 1,3-diyne 360[264]. No homocoupling product is formed. This reaction offers a good synthetic method for unsymmetrical 1,3-diynes. 

The aryl- and heteroarylfluorosilanes 541 can be used for the preparation of the unsymmetrical ketones 542[400], Carbonylation of aryl triflate with the siloxycyclopropane 543 affords the 7-keto ester 545. In this reaction, transme-tallation of the siloxycyclopropane 543 with acylpalladium and ring opening generate Pd homoenolate as an intermediate 544 without undergoing elimination of/3-hydrogen[401],... 

---