Unknowns spectroscopy

NMR spectroscopy is probably the singly most powerful technique for the confirmation of structural identity and for stmcture elucidation of unknown compounds. Additionally, the relatively low measurement times and the facility for automation contribute to its usefulness and industrial interest. 

Before the advent of NMR spectroscopy infrared (IR) spectroscopy was the mstrumen tal method most often applied to determine the structure of organic compounds Although NMR spectroscopy m general tells us more about the structure of an unknown com pound IR still retains an important place m the chemist s inventory of spectroscopic methods because of its usefulness m identifying the presence of certain functional groups within a molecule... 

The structural unit associated with an electronic transition m UV VIS spectroscopy IS called a chromophore Chemists often refer to model compounds to help interpret UV VIS spectra An appropriate model is a simple compound of known structure that mcor porates the chromophore suspected of being present m the sample Because remote sub stituents do not affect Xmax of the chromophore a strong similarity between the spectrum of the model compound and that of the unknown can serve to identify the kind of rr electron system present m the sample There is a substantial body of data concerning the UV VIS spectra of a great many chromophores as well as empirical correlations of sub stituent effects on k Such data are helpful when using UV VIS spectroscopy as a tool for structure determination... 

Present day techniques for structure determination in carbohydrate chemistry are sub stantially the same as those for any other type of compound The full range of modern instrumental methods including mass spectrometry and infrared and nuclear magnetic resonance spectroscopy is brought to bear on the problem If the unknown substance is crystalline X ray diffraction can provide precise structural information that m the best cases IS equivalent to taking a three dimensional photograph of the molecule... 

Mass Spectroscopy. A coUection of 125,000 spectra is maintained at Cornell University and is avaUable from John WUey Sons, Inc. (New York) on CD-ROM or magnetic tape. The spectra can be evaluated using a quaHty index algorithm (63,76). Software for use with the magnetic tape version to match unknowns is distributed by Cornell (77). The coUection contains aU avaUable spectral information, including isotopicaUy labeled derivatives, partial spectra, and multiple spectra of a single compound. 

Laser ionization mass spectrometry or laser microprobing (LIMS) is a microanalyt-ical technique used to rapidly characterize the elemental and, sometimes, molecular composition of materials. It is based on the ability of short high-power laser pulses (-10 ns) to produce ions from solids. The ions formed in these brief pulses are analyzed using a time-of-flight mass spectrometer. The quasi-simultaneous collection of all ion masses allows the survey analysis of unknown materials. The main applications of LIMS are in failure analysis, where chemical differences between a contaminated sample and a control need to be rapidly assessed. The ability to focus the laser beam to a diameter of approximately 1 mm permits the application of this technique to the characterization of small features, for example, in integrated circuits. The LIMS detection limits for many elements are close to 10 at/cm, which makes this technique considerably more sensitive than other survey microan-alytical techniques, such as Auger Electron Spectroscopy (AES) or Electron Probe Microanalysis (EPMA). Additionally, LIMS can be used to analyze insulating sam-... 

MeOH with a Hannovia UV lamp in 1973 (73TL2451). Monitoring with H NMR spectroscopy, only two among many products appeared to contain an ethoxy group. After several separations, 3-ethoxy-2-phenylindole (147, 12%), 2-phenylindole (149, 35%), and an unknown ethoxy-containing 2-phenylindole (unknown 148, 3%) were isolated (Scheme 23). 

Other methods of identification include the customary preparation of derivatives, comparisons with authentic substances whenever possible, and periodate oxidation. Lately, the application of nuclear magnetic resonance spectroscopy has provided an elegant approach to the elucidation of structures and stereochemistry of various deoxy sugars (18). Microcell techniques can provide a spectrum on 5-6 mg. of sample. The practicing chemist is frequently confronted with the problem of having on hand a few milligrams of a product whose structure is unknown. It is especially in such instances that a full appreciation of the functions of mass spectrometry can be developed. 

The values given in Table 19.2 are remarkably constant from one aldehyde or ketone to another. As a result, IR spectroscopy is a powerful tool for identifying the kind of a carbonyl group in a molecule of unknown structure. An unknown that shows an IR absorption at 1730 cm 1 is almost certainly an aldehyde rather than a ketone an unknown that shows an IR absorption at 1750 cm-1 is almost certainly a cvclopentanone, and so on. 

Nuclear magnetic resonance (NMR) and infrared spectroscopy (IR) narrowed an unknown down to two possible structures ... 

If the identity of the analyte is genuinely unknown, a farther problem is encountered. In contrast to GC, there are no HPLC systems, combinations of mobile and stationary phases, that are rontinely used for general analyses. Therefore, there are no large collections of k values that can be nsed. For this reason, retention characteristics are often nsed for identification after the nnmber of possible compounds to be considered has been greatly reduced in some way, e.g. the class of compound involved has been determined by colonr tests or UV spectroscopy. 

D. Pseudohalogeno-derivatives.—Little work has been carried out in this area. Isocyanates of cyclic phosphazenes, previously unknown, are thought to be formed in the reaction of NgPaBrg with AgOCN in nitro-methane. They were detected by i.r. spectroscopy, and underwent ready polymerization, which precluded their isolation. On the other hand, isothiocyanates, [NP(NCS)2] (n = 3 or 4), are well known and a detailed study of their spectra has been reported. The azide, N3Pa(N3)8, has been the subject of an i.r. study which suggests that the molecule has Z)3A symmetry. 

When Finch Sharp (1989) used solutions of lower water content they found an unknown XRD pattern that was distinct from that of MgHP04.3H20. This unidentified phase they dubbed hayesite and speculated that it might be a lower hydrate, either MgHP04.2H20 or MgHP04. H2O. Infrared spectroscopy showed that hayesite was less well... 

Standardisation of EPDM characterisation tests (molecular composition, stabiliser and oil content) for QC and specification purposes was reported [64,65]. Infrared spectroscopy (rather than HPLC or photometry) is recommended for the determination of the stabiliser content (hindered phenol type) of EP(D)M [65]. Determination of the oil content of oil-extended EPDM is best carried out by Soxhlet extraction using MEK as a solvent [66], A round robin test was reported that evaluated the various techniques currently used in the investigation of unknown rubber compounds (passenger tyre tread stock formulations) [67]. 

Lussier [71] has given an overview of Uniroyal Chemical s approach to the analysis of compounded elastomers (Scheme 2.2). Uncured compounds are first extracted with ethanol to remove oils for subsequent analysis, whereas cured compounds are best extracted with ETA (ethanol/toluene azeotrope). Uncured compounds are then dissolved in a low-boiling solvent (chloroform, toluene), and filler and CB are removed by filtration. When the compound is cured, extended treatment in o-dichlorobenzene (ODCB) (b.p. 180 °C) will usually suffice to dissolve enough polymer to allow its separation from filler and CB via hot filtration. Polymer identification was based on IR spectroscopy (key role), CB analysis followed ASTM D 297, filler analysis (after direct ashing at 550-600 °C in air) by means of IR, AAS and XRD. Antioxidant analysis proceeded by IR examination of the nonpolymer ethanol or ETA organic extracts. For unknown AO systems (preparative) TLC was used with IR, NMR or MS identification. Alternatively GC-MS was applied directly to the preparative TLC eluent. 

Dealing with incomplete extraction is particularly challenging when analysing polymers containing unknown additive levels. A common strategy is to perform multiple extractions. When incomplete extraction is suspected, it is also useful to apply an alternative analysis technique, such as spectroscopy or elemental analysis. It is good practice to compare the IR spectrum of the polymer before and after extraction to verify the presence of absorbance bands related to the additive. 

Table 5.9 summarises the main features of FTIR spectroscopy as applied to extracts (separated or not). Since many additives have quite different absorbance profiles FTIR is an excellent tool for recognition. Qualitative identification is relatively straightforward for the different classes of additives. Library searching entails a sequential, point-by-point, statistical correlation analysis of the unknown spectrum with each of the spectra in the library. Fully automated analysis of... 

NMR provides one of the most powerful techniques for identification of unknown compounds based on high-resolution proton spectra (chemical shift type integration relative numbers) or 13C information (number of nonequivalent carbon atoms types of carbon number of protons at each C atom). Structural information may be obtained in subsequent steps from chemical shifts in single-pulse NMR experiments, homo- and heteronuclear spin-spin connectivities and corresponding coupling constants, from relaxation data such as NOEs, 7) s 7is, or from even more sophisticated 2D techniques. In most cases the presence of a NOE enhancement is all that is required to establish the stereochemistry at a particular centre [167]. For a proper description of the microstructure of a macromolecule NMR spectroscopy has now overtaken IR spectroscopy as the analytical tool in general use. 

Hyphenation of chromatographic separation techniques (SFC, HPLC, SEC) with NMR spectroscopy as a universal detector is one of the most powerful and time-saving new methods for separation and structural elucidation of unknown compounds and molecular compositions of mixtures [171]. Most of the routinely used NMR flow-cells have detection volumes between 40... 

KBr) databases. Quantitative analysis by GC-FUR is complicated by many uncertainties associated with both the chromatography and spectroscopy [196]. Bulk property detectors (e.g. TCD, FID, etc.) can be used for quantitative analysis when mixture components are known, but provide little structural information for unknown mixture components. Both integrated absorbance and Gram-Schmidt vector methods have been used for the quantitative analysis of mixture components in GC-FTIR. 

---