Unit production system advantages

The filtration unit can be a centrifuge or closed filter that is either a pressure or vacuum unit. Some processes may require solution washing of the crystalline product. Facility design should therefore be optimized for flexibility. Recent pressure/vacuum filtration units can perform several functions such as collection washing with appropriate solvents, solution washing, and drying of a crystalline product. These filter/dryer units offer the advantage of a closed system that protects product from people and vice... 

Before examining the approaches to recycling textiles, it is important to place this discussion in the context of the product life cycle. The methodology of LCA is one approach to quantitatively assess the environmental advantages of recycling fibre. An LCA typically considers the energy, water and chemical impacts of a product system from cradle (raw materials) through to production, distribution, use by the consumer and disposal. Formal LCA follows ISO 14040 and ISO 14044 standards. It requires determination of the functional unit of the product or raw material in question to be assessed, for example T kg of cotton fibre , or one viscose blouse . Importantly, LCA is conducted under defined system boundaries. For example, the LCA may be... 

This shows that all these systems have already left the experimental R D stage and become an economic reality. They have already demonstrated lower consumption of natural fossil fuels per unit of power generated and lower emission of greenhouse gases and other harmful products. Other advantages over thermal power plants are associated with fuel cell-based power plants. They can be produced in modules, from which power plants of different size and output can be put together. This attribute, known as scalability, facilitates the design and construction of plants adapted to specific local requirements. 

For high volume production, the injection moulding process is the most effective in achieving low unit costs. The advantages of mass production can be combined with the needs of a fragmented, customized market by means of modular design systems, allowing several different assemblies to be produced from a few rationalized tools. 

Introduction Reactive distillation is a unit operation in which chemical reaction and distiUative separation are carried out simultaneously within a fractional distillation apparatus. Reactive distillation may be advantageous for liqiiid-phase reaction systems when the reaction must be carried out with a large excess of one or more of the reactants, when a reaction can be driven to completion by removal of one or more of the products as they are formed, or when the product recoveiy or by-product recycle scheme is complicated or macfe infeasible by azeotrope formation. 

While a desalter costs more to install than the flash drum system, it has the advantage of removing up to 95% of the salt from the oil permanently. Because less salt reaches the fractionating tower in a unit equipped with a desalter, a smaller quantity of corrosion products is formed due to high temperature breakdown and hydrolysis, and the salt content of the residual fuel oil is much lower. 

Heterogeneous catalytic systems offer the advantage that separation of the products from the catalyst is usually not a problem. The reacting fluid passes through a catalyst-filled reactor m the steady state, and the reaction products can be separated by standard methods. A recent innovation called catalytic distillation combines both the catalytic reaction and the separation process in the same vessel. This combination decreases the number of unit operations involved in a chemical process and has been used to make gasoline additives such as MTBE (methyl tertiai-y butyl ether). 

---