Unsaturated triglycerides

Natural fats are glycerol esters of fatty acids known as triglycerides. Unsaturated fats are generally liquids (oils) at room temperature, while triglycerides rich in saturated fatty acids are generally solids. View tristearin and triolein. Which one of these is saturated and which is unsaturated Are die double bonds in the unsaturated fat cis or transl... 

Chem. Descrip. Triglyceride saturated C16-C18 fatty acids and Triglyceride unsaturated C16-C18fetty acids... 

Multiply unsaturated linolenic and linoleic acid residues make triglycerides more vulnerable to oxidative degradation than oleic acid which is relatively stable. It is therefore desirable to hydrogenate the most unsaturated residues selectively without production of large quantities of stearic (fully saturated) acid. The stepwise reduction of an unsaturated oil may be visualized as ... 

RandomiZation/Interesterification. Transesterification occurs when a carboxyUc acid (acidolysis) or alcohol (alcoholysis) reacts with an ester to produce a different ester (20). Ester—ester interchange is also a form of transesterification. If completely unsaturated triglyceride oil (UUU) reacts with a totally saturated fat (SSS) in the presence of an active catalyst such as sodium, potassium, or sodium alkoxide, triglycerides of intermediate composition may be formed. 

Carboxylate soaps are most commonly formed through either direct or indirect reaction of aqueous caustic soda, ie, alkaH earth metal hydroxides such as NaOH, with fats and oils from natural sources, ie, triglycerides. Fats and oils are typically composed of both saturated and unsaturated fatty acid molecules containing between 8 and 20 carbons randomly linked through ester bonds to a glycerol [56-81-5] backbone. Overall, the reaction of caustic with triglyceride yields glycerol (qv) and soap in a reaction known as saponification. The reaction is shown in equation 1. 

These resins are produeed by reacting a polyhydric alcohol, usually glycerol, with a polybasic acid, usually phthalic acid and the fatty acids of various oils such as linseed oil, soya bean oil and tung oil. These oils are triglycerides of the type shown in Figure 25.30. R], R2 and R3 usually contain unsaturated groupings. The alkyd resins would thus have structural units, such as is shown in Figure 25.31. 

An IV fat emulsion contains soybean or safflower oil and a mixture of natural triglycerides, predominately unsaturated fatty acids. It is used in the prevention and treatment of essential fatty acid deficiency. It also provides nonprotein calories for those receiving TPN when calorie requirements cannot be met by glucose. Examples of intravenous fat emulsion include Intralipid 10% and 20%, Liposyn II 10% and 20%, and Liposyn III 10% and 20%. Fat emulsion is used as a source of calories and essential fatty acids for... 

Lipids contain saturated and unsaturated fatty acids and can be either liquid or solid. Which of these lipids is an example of a triglyceride mixture that contains mostly saturated fatty acids ... 

What is the relative amount of saturated and unsaturated fatty acids in sample triglycerides ... 

Determine the relative amount of saturation or unsaturation in samples of triglycerides. 

The first paints were based upon linseed oil (obtained from flax). This is an unsaturated long-chain triglyceride, which, with metal activators, crosslinks via radical pathways to form a continuous film on the substrate. Modern paints use synthetic polymers together with either a solvent or suspending medium (e.g., water), which evaporates leaving the deposited film. Exceptions are powder coatings, which require heat for completion. 

The iodine number is an indication of the degree of unsaturation of triglycerides, and is the amount of iodine (in mg) required to react with 1 g of lipid material. 

The oils from which factices are manufactured are unsaturated vegetable and animal oils, which react with sulphur. Fatty oils with iodine number greater than 80 (iodine number is defined as the number of grammes of iodine absorbed by 100 g of fat/oil) are generally used, i.e., oils with three or more double bonds per triglyceride molecule. Rapeseed oil is the most common oil used for general purpose grades and castor oil is used for oil resistant factice. Other oils are used in preference by other countries due to local availability and cost. 

Triglycerides of unsaturated fatty acids, which are an abundant commodity, were shown to disproportionate with the WCl6/(CH3)4Sn catalyst... 

---