Trichloroethane, reaction

Acetylene and hydrogen chloride historically were used to make chloroprene [126-99-8]. The olefin reaction is used to make ethyl chloride from ethylene and to make 1,1-dichloroethane from vinyl chloride. 1,1-Dichloroethane is an intermediate to produce 1,1,1-trichloroethane by thermal (26) or photochemical chlorination (27) routes. 

Addition. Chlorine adds to vinyl chloride to form 1,1,2-trichloroethane [79-00-5] (44—46). Chlorination can proceed by either an ionic or a radical path. In the Hquid phase and in the dark, 1,1,2-trichloroethane forms by an ionic path when a transition-metal catalyst such as ferric chloride [7705-08-0], FeCl, is used. The same product forms in radical reactions up to 250°C. Photochernically initiated chlorination also produces... 

Manufacture. Viayhdene chloride monomer can be conveniendy prepared ia the laboratory by the reaction of 1,1,2-trichloroethane [79-00-5] with aqueous alkah ... 

Many chlorinated hydrocarbons react readily with aluminum in the so-caHed bleeding reaction. A red aluminum chloride—chlorinated hydrocarbon complex is formed. Storage of uninhibited chlorinated solvents in aluminum vessels results in corrosion in a short period of time. Proprietary organic inhibitors permit commercial use of reactive solvents such as 1,1,1-trichloroethane and trichloroethylene for cleaning of aluminum. 

Methane, chlorine, and recycled chloromethanes are fed to a tubular reactor at a reactor temperature of 490—530°C to yield all four chlorinated methane derivatives (14). Similarly, chlorination of ethane produces ethyl chloride and higher chlorinated ethanes. The process is employed commercially to produce l,l,l-trichloroethane. l,l,l-Trichloroethane is also produced via chlorination of 1,1-dichloroethane with l,l,2-trichloroethane as a coproduct (15). Hexachlorocyclopentadiene is formed by a complex series of chlorination, cyclization, and dechlorination reactions. First, substitutive chlorination of pentanes is carried out by either photochemical or thermal methods to give a product with 6—7 atoms of chlorine per mole of pentane. The polychloropentane product mixed with excess chlorine is then passed through a porous bed of Fuller s earth or silica at 350—500°C to give hexachlorocyclopentadiene. Cyclopentadiene is another possible feedstock for the production of hexachlorocyclopentadiene. 

Addition Chlorination. Chlorination of olefins such as ethylene, by the addition of chlorine, is a commercially important process and can be carried out either as a catalytic vapor- or Hquid-phase process (16). The reaction is influenced by light, the walls of the reactor vessel, and inhibitors such as oxygen, and proceeds by a radical-chain mechanism. Ionic addition mechanisms can be maximized and accelerated by the use of a Lewis acid such as ferric chloride, aluminum chloride, antimony pentachloride, or cupric chloride. A typical commercial process for the preparation of 1,2-dichloroethane is the chlorination of ethylene at 40—50°C in the presence of ferric chloride (17). The introduction of 5% air to the chlorine feed prevents unwanted substitution chlorination of the 1,2-dichloroethane to generate by-product l,l,2-trichloroethane. The addition of chlorine to tetrachloroethylene using photochemical conditions has been investigated (18). This chlorination, which is strongly inhibited by oxygen, probably proceeds by a radical-chain mechanism as shown in equations 9—13. 

Dehydrochlorination of chlorinated derivatives such as 1,1,2-trichloroethane may be carried out with a variety of catalytic materials, including Lewis acids such as aluminum chloride. Refluxing 1,1,2-trichlorethane with aqueous calcium hydroxide or sodium hydroxide produces 1,1-dichloroethylene in good yields (22), although other bases such as magnesium hydroxide have been reported (23). Dehydrochlorination of the 1,1,1-trichloroethane isomer with catalytic amounts of a Lewis acid also yields 1,1-dichloroethylene. Other methods to dehydrochlorinate 1,1,1-trichloroethane include thermal dehydrochlorination (24) and by gas-phase reaction over an alumina catalyst or siUca catalyst (25). 

The ultraviolet lamps used in the photochlorination process serve to dissociate the chlorine into free radicals and start the radical-chain reaction. Other radical sources, such as 2,2 -a2obisisobutyronitrile, have been used (63,64). Primary by-products of the photochlorination process include 1,1,2-trichloroethane (15—20%), tetrachloroethanes, and pentachloroethane. Selectivity to 1,1,1-trichloroethane is higher in vapor-phase chlorination. Various additives, most containing iodine or an aromatic ring in the molecule, have been used to increase the selectivity of the reaction to... 

A process of minor importance utili2es a continuous noncatalytic chlorination of ethane which produces 1,1,1-trichloroethane and a number of other products, depending on the reaction conditions. 

The rate of reaction is faster with the 1,1,2-trichloroethane than with 1,1,1-trichloroethane. Base-cataly2ed dehydrochlorination gives primarily... 

Miscellaneous Reactions. Chlorinolysis of mixtures containing 1,1,2-trichloroethane at 550°C was found to give primarily perchloroethylene and hexachloroethane (97). 

Trichloroethane is also a coproduct in the thermal and photochemical chlorination of 1,1-dichloroethane to produce 1,1,1-trichloroethane. Vapor chlorination favors the 1,1,1-isomer, whereas reaction in the Hquid phase may give much higher ratios of 1,1,2-trichloroethane. V-type 2eohtes have been used in vapor-phase chlorination of 1,1-dichloroethane to produce 1,1,2-trichloroethane in high selectivity (100). 

Ethers, esters, amides and imidazolidines containing an epithio group are said to be effective in enhancing the antiwear and extreme pressure peiformance of lubricants. Other uses of thiiranes are as follows fuel gas odorant (2-methylthiirane), improvement of antistatic and wetting properties of fibers and films [poly(ethyleneglycol) ethers of 2-hydroxymethyl thiirane], inhibition of alkene metathesis (2-methylthiirane), stabilizers for poly(thiirane) (halogen adducts of thiiranes), enhancement of respiration of tobacco leaves (thiirane), tobacco additives to reduce nicotine and to reduce phenol levels in smoke [2-(methoxymethyl)thiirane], stabilizers for trichloroethylene and 1,1,1-trichloroethane (2-methylthiirane, 2-hydroxymethylthiirane) and stabilizers for organic compounds (0,0-dialkyldithiophosphate esters of 2-mercaptomethylthiirane). The product of the reaction of aniline with thiirane is reported to be useful in the flotation of zinc sulfide. 

An overview of the reactions involving trihalomethanes (haloforms) CHXYZ, where X, Y, and Z are halogen atoms, has been given in the context of ozone depletion (Hayman and Derwent 1997). Interest in the formation of trichloroacetaldehyde formed from trichloroethane and tetrachloroethene is heightened by the phytotoxicity of trichloroacetic acid (Frank et al. 1994), and by its occurrence in rainwater that seems to be a major source of this contaminant (Muller et al. 1996). The situation in Japan seems, however, to underscore the possible significance of other sources including chlorinated wastewater (Hashimoto et al. 1998). Whereas there is no doubt about the occurrence of trichloroacetic acid in rainwater (Stidson et al. 2004), its major source is unresolved since questions remain on the rate of hydrolysis of trichloroacetaldehyde (Jordan et al. 1999). 

Platz J, OJ Nielsen, J Sehested, TJ Wallington (1995) Atmospheric chemistry of l,Ll-trichloroethane UV absorption spectra and self-reaction kinetics of CCljCHj and CCI3CH2O2 radicals, kinetics of the reactions of the CCljCHjOj radical with NO and NOj, and the fate of alkoxy radical CCI3CH2O. J Phys Chem 99 6570-6579. 

It is known that alumina is chlorinated exothermically at above 200° C by contact with halocarbon vapours, and hydrogen chloride, phosgene etc. are produced. It has now been found that a Co/Mo-alumina catalyst will generate a substantial exotherm in contact with vapour of carbon tetrachloride or 1,1,1-trichloroethane at ambient temperature in presence of air. In absence of air, the effect is less intense. Two successive phases appear to be involved first, adsorption raises the temperature of the alumina then reaction, presumably metal-catalysed, sets in with a further exotherm. 

Reductive dechlorination or reductive hydrogenolysis is a common transformation of 1- and 2-carbon chlorinated aliphatics under methanogenic conditions [373,374]. 1,1,1-Trichloroethane (l,l,l-TCA),for example,is converted to 1,1-dichloroethane (1,1-DCA) [375], and Perchloroethylene (PCE) is successively converted to TCE, cDCE, VC, and ethane [274]. Each reductive dechlorination is a two-electron transfer reaction. 

Trichloroethane may react with OH radicals in the atmosphere producing chlorine atoms and chlorine oxides (McConnell and Schiff, 1978). The rate constant for this reaction at 300 K is 9.0 x 10 cmVmolecule-sec (Hendry and Kenley, 1979). 

Chemical/Physical. Products of hydrolysis include chloroacetaldehyde, 1,1-dichloroethylene, and HCl. The aldehyde is subject to hydrolysis forming hydroxyacetaldehyde and HCl (Kollig, 1993). The reported half-life for this reaction at 20 °C is 170 yr (Vogel et al., 1987). Under alkaline conditions, 1,1,2-trichloroethane hydrolyzed to 1,2-dichloroethylene. The reported hydrolysis half-life in water at 25 °C and pH 7 is 139.2 yr (Sata and Nakajima, 1979). 

---