Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Transition metal catalysis cobalt complexes

In spite of the many modern techniques available to the chemist, the known chemistry of polynuclear cobalt (III) complexes is essentially that deduced by Werner 60 years ago. Since his work, no new polynuclear cobalt complexes have been prepared and characterized and no new reactions uncovered. Modem work in this area is being aimed at attaining a better understanding of the electronic structures inherent in polynuclear ions, which would be of value in a variety of active fields. The chemistry of polynuclear complexes is important in such new areas as synthetic oxygen carriers, electron transfer reactions, and transition metal catalysis. The fact that these new investigations are solidly based on Werner s pioneer investigations testifies to the genius with which he opened up a new area of coordination chemistry, with only the simple chemical techniques available to him. His work in the area of polynuclear cobalt(III) ammine complexes should continue to serve as a model of solid research for some time to come. [Pg.84]

Transition metal salts or complexes are known to catalyze effectively the cyclopropanation of olefins with diazoalkanes. Asymmetric synthesis with chiral copper catalysts (Nozaki et ai, 1966, 1968 Noyori et al., 1969 Moser, 1969), as well as a detailed kinetic study (Salomon and Kochi, 1973), has suggested the intervention of copper-carbene complexes as reactive intermediates. Recently synthesis of crysanthemic acid (CCXXXIV) (R = H) with high optical yield (60-70 %) has been achieved by applying this asymmetric catalysis (Aratani et al., 1975). The camphorglyoxime-cobalt(I) complex is also effective for the enantioselective reaction (Tatsuno et al., 1974). [Pg.154]

While major advances in the area of C-H functionalization have been made with catalysts based on rare and expensive transition metals such as rhodium, palladium, ruthenium, and iridium [7], increasing interest in the sustainability aspect of catalysis has stimulated researchers toward the development of alternative catalysts based on naturally abundant first-row transition metals including cobalt [8]. As such, a growing number of cobalt-catalyzed C-H functionalization reactions, including those for heterocycle synthesis, have been reported over the last several years to date (early 2015) [9]. The purpose of this chapter is to provide an overview of such recent advancements with classification according to the nature of the catalytically active cobalt species involved in the C-H activation event. Besides inner-sphere C-H activation reactions catalyzed by low-valent and high-valent cobalt complexes, nitrene and carbene C-H insertion reactions promoted by cobalt(II)-porphyrin metalloradical catalysts are also discussed. [Pg.319]

Electrochemical processes using especially a consumable iron anode associated with the transition-metal catalysis by simple cobalt or iron complexes permits the carbon-carbon bond-forming reaction by simple and efScient reactions. Unambiguously, functionalized transient cobalt or iron organometaOic are formed in these reactions. [Pg.642]

The performance of VASP for alloys and compounds has been illustrated at three examples The calculation of the properties of cobalt dislicide demonstrates that even for a transition-metal compound perfect agreement with all-electron calculations may be achieved at much lower computational effort, and that elastic and dynamic properties may be predicted accurately even for metallic systems with rather long-range interactions. Applications to surface-problems have been described at the example of the. 3C-SiC(100) surface. Surface physics and catalysis will be a. particularly important field for the application of VASP, recent work extends to processes as complex as the adsorption of thiopene molecules on the surface of transition-metal sulfides[55]. Finally, the efficiciency of VASP for studying complex melts has been illustrate for crystalline and molten Zintl-phases of alkali-group V alloys. [Pg.80]

In this context, homogeneous catalysis has been increasingly used since it can offer valuable advantages, notably in terms of selectivity and efficiency. Indeed, low-valent complexes of transition metals like nickel, palladium, or cobalt can react with many functionalities, thus allowing numerous C,C-bond forming reactions. [Pg.142]

Further work by Anson s group sought to find the effects that would cause the four-electron reaction to occur as the primary process. Studies with ruthenated complexes [[98], and references therein], (23), demonstrated that 7T back-bonding interactions are more important than intramolecular electron transfer in causing cobalt porphyrins to promote the four-electron process over the two-electron reaction. Ruthenated complexes result in the formation of water as the product of the primary catalytic process. Attempts to simulate this behavior without the use of transition-metal substituents (e.g. ruthenated moieties) to enhance the transfer of electron density from the meso position to the porphyrin ring [99] met with limited success. Also, the use of jO-hydroxy substituents produced small positive shifts in the potential at which catalysis occurs. [Pg.545]

Nature demonstrates that transition metals can be very effective in catalyzing transformations, which are impossible to accomplish otherwise under physiological conditions. The prime example is vitamin B12, whose resting state is adenosylco-balamine(III) (reviews [267-273]). On homolysis it triggers a variety of radical reactions crucial to the living world. This inspired the interest of chemists and led to a number of applications. More recently, interest shifted to catalysis by low-valent cobalt complexes. [Pg.247]

The substituent R may be alkyl, cydoalkyt. or benzyl. Catalysts are selected from transition metals which can form carbonyl complexes. Ruthenium and especially cobalt form active catalysts, although other metals like Rh. Pd. Ft. Os, Ir, Cr, Mn, Fe, and Nt have also been examined. If metals like ruthenium or iron catalysis are used, carbon dioxide is formed instead of water as the by-product. [Pg.105]

Cobalt B12 Enzymes Coenzymes Copper Hemocyanin/Tyrosinase Models Heterogeneous Catalysis by Metals Hydride Complexes of the Transition Metals Hydrocyanation by Homogeneous Catalysis Hydrogen Inorganic Chemistry Mechanisms of Reaction of Organometalhc Complexes Nickel OrganometaUic Chemistry Ohgomerization Polymerization by... [Pg.1642]

For transition metals, such migrations are accompanied by ligand replacement. The chemistry and catalysis of transition metal complexes in zeolites have been recently reviewed by Lunsford (156). In these catalysts, it can be desirable to replace, for example, ammonia by pyridine. Zeolite-encaged cobalt complexes, for example, exhibit high potential for oxygen activation. [Pg.141]

Among the most significant developments in the field of catalysis in recent years have been the discovery and elucidation of various new, and often novel, catalytic reactions of transition metal ions and coordination compounds 13, 34). Examples of such reactions are the hydrogenation of olefins catalyzed by complexes of ruthenium (36), rhodium (61), cobalt (52), platinum (3, 26, 81), and other metals the hydroformylation of olefins catalyzed by complexes of cobalt or rhodium (Oxo process) (6, 46, 62) the dimerization of ethylene (i, 23) and polymerization of dienes (15, 64, 65) catalyzed by complexes of rhodium double-bond migration in olefins catalyzed by complexes of rhodium (24,42), palladium (42), cobalt (67), platinum (3, 5, 26, 81), and other metals (27) the oxidation of olefins to aldehydes, ketones, and vinyl esters, catalyzed by palladium chloride (Wacker process) (47, 48, 49,... [Pg.1]


See other pages where Transition metal catalysis cobalt complexes is mentioned: [Pg.291]    [Pg.325]    [Pg.347]    [Pg.349]    [Pg.112]    [Pg.549]    [Pg.94]    [Pg.290]    [Pg.171]    [Pg.152]    [Pg.526]    [Pg.365]    [Pg.218]    [Pg.210]    [Pg.378]    [Pg.179]    [Pg.1073]    [Pg.22]    [Pg.132]    [Pg.13]    [Pg.30]    [Pg.174]    [Pg.688]    [Pg.269]    [Pg.13]    [Pg.210]    [Pg.195]    [Pg.545]    [Pg.687]    [Pg.384]    [Pg.477]    [Pg.1719]    [Pg.7197]    [Pg.27]   


SEARCH



Catalysis transition metal

Cobalt complexes transition

Complex catalysis

Metals cobalt

Transition catalysis

Transition metal complexes catalysis

Transition metal complexes, cobalt

Transition metal-catalysis metals

Transition metals cobalt

© 2024 chempedia.info