Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Transition metal complexes cobalt

Although trialkyl- and triarylbismuthines are much weaker donors than the corresponding phosphoms, arsenic, and antimony compounds, they have nevertheless been employed to a considerable extent as ligands in transition metal complexes. The metals coordinated to the bismuth in these complexes include chromium (72—77), cobalt (78,79), iridium (80), iron (77,81,82), manganese (83,84), molybdenum (72,75—77,85—89), nickel (75,79,90,91), niobium (92), rhodium (93,94), silver (95—97), tungsten (72,75—77,87,89), uranium (98), and vanadium (99). The coordination compounds formed from tertiary bismuthines are less stable than those formed from tertiary phosphines, arsines, or stibines. [Pg.131]

Azo compounds o-am ino-o -hydroxy diary 1 transition metal complexes, 6,57 bidentate dyes, 6,42 o,o -diaminodiaryI cobalt complexes, 6,58,60 o,o -dihydroxydiaryl copper complexes. 6.55,57 pK 6,47... [Pg.88]

One of the commonest reactions in the chemistry of transition-metal complexes is the replacement of one ligand by another ligand (Fig. 9-3) - a so-called substitution reaction. These reactions proceed at a variety of rates, the half-lives of which may vary from several days for complexes of rhodium(iii) or cobalt(m) to about a microsecond with complexes of titanium(iii). [Pg.186]

As already mentioned, complexes of chromium(iii), cobalt(iii), rhodium(iii) and iridium(iii) are particularly inert, with substitution reactions often taking many hours or days under relatively forcing conditions. The majority of kinetic studies on the reactions of transition-metal complexes have been performed on complexes of these metal ions. This is for two reasons. Firstly, the rates of reactions are comparable to those in organic chemistry, and the techniques which have been developed for the investigation of such reactions are readily available and appropriate. The time scales of minutes to days are compatible with relatively slow spectroscopic techniques. The second reason is associated with the kinetic inertness of the products. If the products are non-labile, valuable stereochemical information about the course of the substitution reaction may be obtained. Much is known about the stereochemistry of ligand substitution reactions of cobalt(iii) complexes, from which certain inferences about the nature of the intermediates or transition states involved may be drawn. This is also the case for substitution reactions of square-planar complexes of platinum(ii), where study has led to the development of rules to predict the stereochemical course of reactions at this centre. [Pg.187]

The NO/NO+ and NO/NO- self-exchange rates are quite slow (42). Therefore, the kinetics of nitric oxide electron transfer reactions are strongly affected by transition metal complexes, particularly by those that are labile and redox active which can serve to promote these reactions. Although iron is the most important metal target for nitric oxide in mammalian biology, other metal centers might also react with NO. For example, both cobalt (in the form of cobalamin) (43,44) and copper (in the form of different types of copper proteins) (45) have been identified as potential NO targets. In addition, a substantial fraction of the bacterial nitrite reductases (which catalyze reduction of NO2 to NO) are copper enzymes (46). The interactions of NO with such metal centers continue to be rich for further exploration. [Pg.220]

Chemical complexes of various transition metals have been shown to promote N-nitrosation (28). These metal complexes include ferrocyanide, ferricyanide, cupric ion, molybate ion, cobalt species, and mercuric acetate. All of the reactions are thought to proceed by oxidation-reduction mechanisms. However, such promotion may not be characteristic of transition metal complexes in general, since ferricyanide ion has been shown to promote nitrosation in metalworking fluids, whereas ferric EDTA does not (2 0). Since the metalworking operation generates metal chips and fines which build up in the fluids, this reaction could be of significance in the promotion of nitrosamine formation in water-based metalworking fluids. [Pg.162]

The next five transition metals iron, cobalt, nickel, copper and zinc are of undisputed importance in the living world, as we know it. The multiple roles that iron can play will be presented in more detail later in Chapter 13, but we can already point out that, with very few exceptions, iron is essential for almost all living organisms, most probably because of its role in forming the amino acid radicals required for the conversion of ribonucleotides to deoxyribonucleotides in the Fe-dependent ribonucleotide reductases. In those organisms, such as Lactobacilli6, which do not have access to iron, their ribonucleotide reductases use a cobalt-based cofactor, related to vitamin B12. Cobalt is also used in a number of other enzymes, some of which catalyse complex isomerization reactions. Like cobalt, nickel appears to be much more extensively utilized by anaerobic bacteria, in reactions involving chemicals such as CH4, CO and H2, the metabolism of which was important... [Pg.8]

The adsorption of transition metal complexes by minerals is often followed by reactions which change the coordination environment around the metal ion. Thus in the adsorption of hexaamminechromium(III) and tris(ethylenediamine) chromium(III) by chlorite, illite and kaolinite, XPS showed that hydrolysis reactions occurred, leading to the formation of aqua complexes (67). In a similar manner, dehydration of hexaaraminecobalt(III) and chloropentaamminecobalt(III) adsorbed on montmorillonite led to the formation of cobalt(II) hydroxide and ammonium ions (68), the reaction being conveniently followed by the IR absorbance of the ammonium ions. Demetallation of complexes can also occur, as in the case of dehydration of tin tetra(4-pyridyl) porphyrin adsorbed on Na hectorite (69). The reaction, which was observed using UV-visible and luminescence spectroscopy, was reversible indicating that the Sn(IV) cation and porphyrin anion remained close to one another after destruction of the complex. [Pg.353]

Organic electroreductive coupling reactions using transition-metal complexes as catalysts have been widely investigated. Reviews on the subject have been published [89, 90]. The method involving the most common transition-metal complexes (nickel, cobalt, palladium) appears to be a useful tool to synthetize heterocycles from organic halides via radical intermediates. Nickel catalyst precursors are nickel(II) salts that are cathodically reduced either to nickel(I) or to nickel(O) and cobalt catalyst... [Pg.361]

As a guide for going through this review it can be helpful to consider briefly the electrochemical and chemical behavior of the most common transition metal complexes i.e., nickel, palladium and cobalt, used in the various reactions collected here. Additional data can be found in [1]. [Pg.144]

Transition metal complexes which react with diazoalkanes to yield carbene complexes can be catalysts for diazodecomposition (see Section 4.1). In addition to the requirements mentioned above (free coordination site, electrophi-licity), transition metal complexes can catalyze the decomposition of diazoalkanes if the corresponding carbene complexes are capable of transferring the carbene fragment to a substrate with simultaneous regeneration of the original complex. Metal carbonyls of chromium, iron, cobalt, nickel, molybdenum, and tungsten all catalyze the decomposition of diazomethane [493]. Other related catalysts are (CO)5W=C(OMe)Ph [509], [Cp(CO)2Fe(THF)][BF4] [510,511], and (CO)5Cr(COD) [52,512]. These compounds are sufficiently electrophilic to catalyze the decomposition of weakly nucleophilic, acceptor-substituted diazoalkanes. [Pg.91]

Other Compounds. Adsorption of MeNC into a cobalt(ii) zeolite at — 196"C was followed by e.s.r. spectroscopy, and the presence of low-spin [Co-(CNMe)j] and [Co(CNMe) ] complex cations demonstrated.This work represents one of the few successful attempts to produce well-characterized transition-metal complexes in a zeolite framework. Addition of NaCp to CoClj and [(BgC2H,Q)CoCp], previously reduced with sodium naphthalide gives a new bimetallic complex, for which structure (94) is proposed. ... [Pg.252]


See other pages where Transition metal complexes cobalt is mentioned: [Pg.177]    [Pg.177]    [Pg.169]    [Pg.155]    [Pg.456]    [Pg.141]    [Pg.19]    [Pg.186]    [Pg.48]    [Pg.6]    [Pg.290]    [Pg.76]    [Pg.65]    [Pg.115]    [Pg.1164]    [Pg.83]    [Pg.121]    [Pg.526]    [Pg.30]    [Pg.69]    [Pg.631]    [Pg.154]    [Pg.23]    [Pg.125]    [Pg.106]    [Pg.192]    [Pg.134]    [Pg.206]    [Pg.28]    [Pg.139]    [Pg.216]    [Pg.580]    [Pg.7]    [Pg.252]   


SEARCH



Cobalt complexes transition

Cobalt complexes with transition metal acceptors

Metals cobalt

Transition metal catalysis cobalt complexes

Transition metal complexes, cobalt porphyrins

Transition metals cobalt

© 2024 chempedia.info