Toxicity colors

Table 10 gives the characteristics of hquid waste arising in liver and beef extract production from a biological production pharmaceutical plant [18]. These wastes can be very high in BOD, COD, TS, colloidal solids, toxicity, color, and odor. The BOD/COD ratio of the... 

The plastic industry continues to move away from toxic colorants, especially those based on heavy metals such as chromium, cadmium, and lead. In the U.S., at least 18 states ban the use of heavy metals, including colorants, in packaging materials. The European Union and some other countries have restrictions on their use, as well. The use of organic colorants or heavy-metal-free (HMF) colorants is continuously increasing, and many colorant producer companies are replacing all of their heavy-metal-containing colorants with systems that present fewer environmental problems and legal restrictions. Colorants incorporated in plastic containers in direct contact with food have to be cleared by FDA, as is the case for other additives. 

J. A. Domanico, Using a standard test protocol to qualify candidate low toxicity colored smoke dyes, presented at Proceedings, 35th International Pyrotechnics Seminar, Fort Collins, CO, July 2008. 

Moreover, multivariate optimization, the simultaneous optimization of several properties, will increasingly come into focus. A drug should have high selectivity in binding to different receptors and minimal toxicity, good solubility and penetration, and so on. A hair color should have a brilliant shine, be absorbed well, not be washed out, not damage the hair, not be toxic, and be stable under sunlight, etc. 

Ozone s presence in the atmosphere (amounting to the equivalent of a layer 3 mm thick under ordinary pressures and temperatures) helps prevent harmful ultraviolet rays of the sun from reaching the earth s surface. Pollutants in the atmosphere may have a detrimental effect on this ozone layer. Ozone is toxic and exposure should not exceed 0.2 mg/m (8-hour time-weighted average - 40-hour work week). Undiluted ozone has a bluish color. Liquid ozone is bluish black and solid ozone is violet-black. 

Toxic or malodorous pollutants can be removed from industrial gas streams by reaction with hydrogen peroxide (174,175). Many Hquid-phase methods have been patented for the removal of NO gases (138,142,174,176—178), sulfur dioxide, reduced sulfur compounds, amines (154,171,172), and phenols (169). Other effluent treatments include the reduction of biological oxygen demand (BOD) and COD, color, odor (142,179,180), and chlorine concentration. 

In heavy-metal analysis of the same pigments, metals found were present in only trace amounts. The data Hsted place the products tested in the category of nontoxic materials. The Radiant Color Co. has conducted toxicity tests on its own products similar to the A-Series and has found them to be nontoxic. Heavy metals were found only in trace amounts in these tests. 

AH these appHcations underscore polymer safety. If articles made of HDPE contain fiUers, processing aids, and colorants, their toxic effects must be estimated separately. 

LLDPE by itself does not present any health-related hazard on account of its chemical inertness and low toxicity. Consequently, film, containers, and container Hds made from LLDPE are used on a large scale in food and dmg packaging. Some LLDPE grades produced with unsupported metallocene catalysts have an especially high purity due to high catalyst productivity and a low contamination level of resins with catalyst residue. FDA approved the use of film manufactured from these resins for food contact and for various medical appHcations (80). However, if LLDPE articles contain fillers, processing aids, or colorants, thek health factors must then be judged separately. 

Pigments and Extenders. Pigments are selected for use in house paints based on thek appearance and performance quaUties. Appearance includes color and opacifying abiUty. Performance quaUties include ultraviolet light resistance, fade resistance, exterior weatherabiUty, chemical resistance, as well as particle size and shape. Toxicity profiles and safety and health related properties are also important criteria in pigment selection. 

Safety Showers. Safety showers and eyewash fountains or hoses should be installed where corrosive or toxic materials are handled. A large-volume, low velocity discharge from directly overhead should effect continuous drenching, ie, a minimum flow of 20 L/min (50 gal /min). Water to outside showers may be heated to a maximum temperature of 27°C by an electric heating cable. The valves for all safety showers should be at the same height and relative position to the shower head, and they should operate in the same way and direction. The shower station should be identified by paint of a bright, contrasting color. In areas where chemicals harmful to the eyes may be encountered, an eyewash fountain or spray should be available in case of splash accidents. 

A commercially interesting low calorie fat has been produced from sucrose. Proctor Gamble has patented a mixture of penta- to octafatty acid ester derivatives of sucrose under the brand name Olestra. It was approved by the FDA in January 1996 for use as up to 100% replacement for the oil used in preparing savory snacks and biscuits. Olestra, a viscous, bland-tasting Hquid insoluble in water, has an appearance and color similar to refined edible vegetable oils. It is basically inert from a toxicity point of view as it is not metabolized or absorbed. It absorbs cholesterol (low density Hpoprotein) and removes certain fat-soluble vitamins (A, D, E, and K). Hence, Olestra has to be supplemented with these vitamins. No standard LD q tests have been performed on Olestra however, several chronic and subchronic studies were performed at levels of 15% in the diet, and no evidence of toxicity was found. No threshold limit value (TLV), expressed as a maximum exposure per m of air, has been estabhshed, but it is estimated to be similar to that of an inert hpid material at 5 mg/m. ... 

---