THz spectroscopy

Especially with LTG GaAs, materials became available that were nearly ideal for time-resolved THz spectroscopy. Due to the low growth temperature and the slight As excess incorporated, clusters are fonned which act as recombination sites for the excited carriers, leading to lifetimes of <250 fs [45], With such recombination lifetunes, THz radiators such as dipole anteimae or log-periodic spirals placed onto optoelectronic substrates and pumped with ultrafast lasers can be used to generate sub-picosecond pulses with optical bandwidths of 2-4 THz. Moreover, coherent sub-picosecond detection is possible, which enables both... 

Material response in THz frequency region, which corresponds to far- and mid-infrared electromagnetic spectrum, carries important information for the understanding of both electronic and phononic properties of condensed matter. Time-resolved THz spectroscopy has been applied extensively to investigate the sub-picosecond electron-hole dynamics and the coherent lattice dynamics simultaneously. In a typical experimental setup shown in Fig. 3.5, an... 

Biopharmaceutics is a fast growing area with many new opportunities for the pharmaceutical industry. Raman process monitoring has some great potential in this field due to its compatibility with water, in contrast to, e.g. IR or THz spectroscopy, although very little has been demonstrated so far. There are also challenges to be considered such as significant fluorescence background... 

THz spectroscopy was born from research efforts to produce and detect ultra-short electrical currents as they traveled down a transmission line.26 In 1988-1989, it was discovered that electromagnetic radiation pulses produced by time-varying current could be propagated through free space and picked up by a detector.27 By placing a sample between a THz source and detector, one could measure the differences in radiation pulses due to scattering or absorption by the sample to understand its chemical properties. 

There exists a need for high-power pulsed CW radiation sources to enable fast switching times and high repetition rates for electromagnetic resonance experiments. In addition, commercial development of THz sources is needed so that this technology can be made more widely available to the research community. Furthermore, current detectors for THz spectroscopy have high cooling requirements to minimize noise in spectral data further developments are needed to provide inexpensive and user-friendly detector options. 

To uniquely identify the intrinsic feature of the material, one method of sample preparation is to pelletize the explosive powders or crystals [14], It is standard practice in far-infrared (THz) spectroscopy to press samples into pellet form to measure the THz transmission spectra. When the sample is a powder with a grain size comparable to the THz wavelength (about 300 microns), the powder strongly scatters the THz radiation. Another method of sample preparation is to mix the material (e.g., RDX) with an inert matrix or filler material to create a pellet. The filler is typically a material that is transparent in the THz such as polyethylene. This allows dilute concentrations of a highly absorbing agent to be measured. 

Okumura K, Tanimura Y. Two-dimensional THz spectroscopy of liquids non-linear vibrational response to a series of THz laser pulses. Chem Phys Lett 1998 295 298-304. 

Since the late nineteenth century, dielectric spectroscopy has been used to monitor dynamical properties of solid and liquid materials. At that time, dielectric measurements were performed either at a single frequency or in a very limited frequency range now, however, measurement technique and instrumentation have developed to such an extent that dielectric spectroscopy is today a well-established method to probe molecular dynamics over a broad range in frequency or time (cf. reviews by Johari [1], Bottcher and Bordewijk [34], Williams [35,36], and Kremer and Schonhals [37]), even with commercially available equipment. Including the latest developments, one can even say that nowadays dielectric spectroscopy is the only method that is fully able to realize the idea of 0- to 1-THz spectroscopy. In data sets that cover the range of up to 10 6—1013 Hz—that is, from ultra-low frequencies up to the far infrared—the full range of reorientational dynamics in... 

THz SPECTROSCOPY OF PROTEINS IN WATER DIRECT ABSORPTION AND CIRCULAR DICHROISM... 

On the other hand, z-polarized light has a distinct contribntion into a peak at 11 cm (Fig. 5). These resnlts are important, since the orientation seems to affect the experimental transmission spectra as well. The molecnle is not synunetric (see Figs. 1 - 2). The direction of z-axis (in bine) is somewhat more closely associated with directions of carbon atoms backbones. Therefore, an anisotropy in distribution of biological molecules can be detected using the THz spectroscopy. 

Transient terahertz spectroscopy Time-resolved terahertz (THz) spectroscopy (TRTS) has been used to measure the transient photoconductivity of injected electrons in dye-sensitised titanium oxide with subpicosecond time resolution (Beard et al, 2002 Turner et al, 2002). Terahertz probes cover the far-infrared (10-600 cm or 0.3-20 THz) region of the spectrum and measure frequency-dependent photoconductivity. The sample is excited by an ultrafast optical pulse to initiate electron injection and subsequently probed with a THz pulse. In many THz detection schemes, the time-dependent electric field 6 f) of the THz probe pulse is measured by free-space electro-optic sampling (Beard et al, 2002). Both the amplitude and the phase of the electric field can be determined, from which the complex conductivity of the injected electrons can be obtained. Fitting the complex conductivity allows the determination of carrier concentration and mobility. The time evolution of these quantities can be determined by varying the delay time between the optical pump and THz probe pulses. The advantage of this technique is that it provides detailed information on the dynamics of the injected electrons in the semiconductor and complements the time-resolved fluorescence and transient absorption techniques, which often focus on the dynamics of the adsorbates. A similar technique, time-resolved microwave conductivity, has been used to study injection kinetics in dye-sensitised nanocrystalline thin films (Fessenden and Kamat, 1995). However, its time resolution is limited to longer than 1 ns. 

Terahertz (THz) spectroscopy systems utilize far-infrared radiation to extract molecular spectral information in an otherwise inaccessible region of the electromagnetic spectrum where various rotational, vibrational, and translational modes of molecules are located, 0.1-10 THz (Fig. 1). As the wavenumber range is narrowed, THz-radiation can yield more specific information about a particular chemical component within the system. Unlike most spectroscopic techniques, THz instrument measures the wave temporal electric field, which can be Fourier transformed to yield THz pulse amplitude and phase. This added capability allows precise... 

---