Electromagnetic infrared

To find arms Magnetic, electromagnetic, infrared metal detectors, radiographic-television intro-scopes, fluoroscopes... 

Both infrared and Raman spectroscopy provide infonnation on the vibrational motion of molecules. The teclmiques employed differ, but the underlying molecular motion is the same. A qualitative description of IR and Raman spectroscopies is first presented. Then a slightly more rigorous development will be described. For both IR and Raman spectroscopy, the fiindamental interaction is between a dipole moment and an electromagnetic field. Ultimately, the two... 

Gaseous H CI has a strong absorption band centered at about X = 3.40 X 10 m in the infrared portion of the electromagnetic radiation spec-tmm. On the assumption that D bonds to Cl with the same str ength that H does, predict the frequency of vibration in Hz and rad of D CI. 

Electromagnetic radiation (Section 13 1) Vanous forms of ra diation propagated at the speed of light Electromagnetic radiation includes (among others) visible light infrared ul traviolet and microwave radiation and radio waves cos mic rays and X rays... 

Colorimetry, in which a sample absorbs visible light, is one example of a spectroscopic method of analysis. At the end of the nineteenth century, spectroscopy was limited to the absorption, emission, and scattering of visible, ultraviolet, and infrared electromagnetic radiation. During the twentieth century, spectroscopy has been extended to include other forms of electromagnetic radiation (photon spectroscopy), such as X-rays, microwaves, and radio waves, as well as energetic particles (particle spectroscopy), such as electrons and ions. ... 

The focus of this chapter is photon spectroscopy, using ultraviolet, visible, and infrared radiation. Because these techniques use a common set of optical devices for dispersing and focusing the radiation, they often are identified as optical spectroscopies. For convenience we will usually use the simpler term spectroscopy in place of photon spectroscopy or optical spectroscopy however, it should be understood that we are considering only a limited part of a much broader area of analytical methods. Before we examine specific spectroscopic methods, however, we first review the properties of electromagnetic radiation. 

In absorption spectroscopy a beam of electromagnetic radiation passes through a sample. Much of the radiation is transmitted without a loss in intensity. At selected frequencies, however, the radiation s intensity is attenuated. This process of attenuation is called absorption. Two general requirements must be met if an analyte is to absorb electromagnetic radiation. The first requirement is that there must be a mechanism by which the radiation s electric field or magnetic field interacts with the analyte. For ultraviolet and visible radiation, this interaction involves the electronic energy of valence electrons. A chemical bond s vibrational energy is altered by the absorbance of infrared radiation. A more detailed treatment of this interaction, and its importance in deter-... 

As discussed earlier in Section lOC.l, ultraviolet, visible and infrared absorption bands result from the absorption of electromagnetic radiation by specific valence electrons or bonds. The energy at which the absorption occurs, as well as the intensity of the absorption, is determined by the chemical environment of the absorbing moiety. Eor example, benzene has several ultraviolet absorption bands due to 7t —> 71 transitions. The position and intensity of two of these bands, 203.5 nm (8 = 7400) and 254 nm (8 = 204), are very sensitive to substitution. Eor benzoic acid, in which a carboxylic acid group replaces one of the aromatic hydrogens, the... 

The so-called peak power delivered by a pulsed laser is often far greater than that for a continuous one. Whereas many substances absorb radiation in the ultraviolet and infrared regions of the electromagnetic spectrum, relatively few substances are colored. Therefore, a laser that emits only visible light will not be as generally useful as one that emits in the ultraviolet or infrared ends of the spectrum. Further, witli a visible-band laser, colored substances absorb more or less energy depending on the color. Thus two identical polymer samples, one dyed red and one blue, would desorb and ionize with very different efficiencies. 

Neodymium and YAG Lasers. The principle of neodymium and YAG lasers is very similar to that of the ruby laser. Neodymium ions (Nd +) are used in place of Cr + and are often distributed in glass rather than in alumina. The light from the neodymium laser has a wavelength of 1060 nm (1.06 xm) it emits in the infrared region of the electromagnetic spectrum. Yttrium (Y) ions in alumina (A) compose a form of the naturally occurring garnet (G), hence the name, YAG laser. Like the ruby laser, the Nd and YAG lasers operate from three- and four-level excited-state processes. 

In the process of absorption or emission of infrared radiation involving transitions between two vibrational states the interaction is usually between the molecule and the electric, rather than the magnetic, component of the electromagnetic radiation (see Section 2.1). For this... 

Radiation Resistance. Polysulfones exhibit resistance to many electromagnetic frequencies of practical significance, including microwave, visible, and infrared. Especially notable is the excellent resistance to microwave radiation, which has contributed to the excellent fit of polysulfones in cookware appHcations. Polysulfone also shows good resistance to x-rays, electron beam (24), and gamma (25,26) radiation under many practical appHcation conditions. 

---