Thermogravimetric analysi method

The YBa2Cu307 y series with 0starting material was prepared in the manner described in the synthesis section and its oxygen content was evaluated to be 6.96+0.1 by a thermogravimetric analysis method (TGA) described elsewhere (11). This value will be taken as 7.0 (i.e. y = 0) in the following. Different values of y were then obtained by a contolled heat treatment of rectangular bars of the compound in an argon ambient. 

Differential scanning calorimetry (DSC) is one of the best known techniques among a group called thermal analysis methods others include differential thermal analysis, d5mamic mechanical analysis, and thermogravimetric analysis methods all of which are covered in the following sections. 

Mixtures can be identified with the help of computer software that subtracts the spectra of pure compounds from that of the sample. For complex mixtures, fractionation may be needed as part of the analysis. Commercial instmments are available that combine ftir, as a detector, with a separation technique such as gas chromatography (gc), high performance Hquid chromatography (hplc), or supercritical fluid chromatography (96,97). Instmments such as gc/ftir are often termed hyphenated instmments (98). Pyrolyzer (99) and thermogravimetric analysis (tga) instmmentation can also be combined with ftir for monitoring pyrolysis and oxidation processes (100) (see Analytical methods, hyphenated instruments). 

Fig. 11. Thermogravimetric analysis of cellulose triacetate. Method 20°C/min to 700°C, in (N2) at 40 mL/rnin purging rate.

When solids react, we would like to know at what temperature the solid state reaction takes place. If the solid decomposes to a different composition, or phase, we would like to have this knowledge so that we can predict and use that knowledge In preparation of desired materials. Sometimes, intermediate compounds form before the final phase. In this chapter, we will detail some of the measurements used to characterize the solid state and methods used to foUow solid state reactions. This will consist of various types of thermal analysis (TA), including differentlEd thermal analysis (DTA), thermogravimetric analysis (TGA) and measurements of optical properties. 

First-order phase transitions can be detected by various thermoanalytical techniques, such as DSC, thermogravimetric analysis (TGA), and thermomechanical analysis (TMA) [31]. Phase transitions leading to visual changes can be detected by optical methods such as microscopy [3], Solid-solid transitions involving a change in the crystal structure can be detected by X-ray diffraction [32] or infrared spectroscopy [33], A combination of these techniques is usually employed to study the phase transitions in organic solids such as drugs. 

Multiwall carbon nanotubes (MWCNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) of ethylene on several mesoporous aluminosilicates impregnated with iron. The aluminosilicates were synthesized by sol-gel method optimizing the Si/Al ratios from 6 to 80. The catalysts are characterized by nitrogen adsorption, X-ray diffraction, 27A1 NMR, thermogravimetric analysis (TGA) and infrared. The MWCNTs are characterized by TGA and transmission and scanning electron microscope. 

Nitrogen adsorption was performed at -196 °C in a Micromeritics ASAP 2010 volumetric instrument. The samples were outgassed at 80 °C prior to the adsorption measurement until a 3.10 3 Torr static vacuum was reached. The surface area was calculated by the Brunauer-Emmett-Teller (BET) method. Micropore volume and external surface area were evaluated by the alpha-S method using a standard isotherm measured on Aerosil 200 fumed silica [8]. Powder X-ray diffraction (XRD) patterns of samples dried at 80 °C were collected at room temperature on a Broker AXS D-8 diffractometer with Cu Ka radiation. Thermogravimetric analysis was carried out in air flow with heating rate 10 °C min"1 up to 900 °C in a Netzsch TG 209 C thermal balance. SEM micrographs were recorded on a Hitachi S4500 microscope. 

For this purpose, all three catalyst supports were initially synthesized by a chemical vapor deposition (CVD) process and thereafter, using a wet impregnation method, loaded with cobalt as the active component for FTS. The as-synthesized Co/nanocatalysts were then characterized by applying electron microscopic analysis as well as temperature-programmed desorption, chemi- and physisorption measurements, thermogravimetric analysis, and inductively coupled plasma... 

Thermogravimetry (TG) is a measure of the thermally induced weight loss of a material as a function of the applied temperature [39], Thermogravimetric analysis is restricted to studies involving either a mass gain or loss, and it is most commonly used to study desolvation processes and compound decomposition. Thermogravimetric analysis is a very useful method for the quantitative determination of the total volatile content of a solid, and it can be used as an adjunct to Karl Fischer titrations for the determination of moisture. 

TA instruments has developed automated thermogravimetric analysis and related kinetic programs that enable a rapid determination of decomposition rates to be made. The following excerpt from a TA application brief [57] explains the method ... 

Thermogravimetric methods such as pyrolysis gas chromatography-mass spectrometry have been used to characterize hydrocarbon sludges from polluted soils [10]. In combination with conventional extraction and supercritical fluid extraction followed by gas chromatography-mass spectrometry, over 100 constituents were identified in soil samples. Thermogravimetric analysis-mass spectrometric results distinguished between the release of a component by thermosorption and by pyrolysis. 

The most broadly based application of the thermogravimetric analysis (TGA) has been visualized and exploited in the investigation of analytical methods, such as ... 

Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) curves of the Ag/Si02 sample prepared by the two-step method are shown in Fig. 6.10. The TGA curve exhibits two evident weight loses, which are in the range of ca. 100 to 250°C and 250 to 550°C, corresponding to the loss of solvent, water, ethanol and THF, and the decomposition of organic silica, respectively. Four evident endothermic peaks can be observed from DTA curve, which centered at ca. 200°C, 350°C, 425°C and 480°C, respectively. 

The section Analysis starts with elemental composition of the compound. Thus the composition of any compound can be determined from its elemental analysis, particularly the metal content. For practically all metal salts, atomic absorption and emission spectrophotometric methods are favored in this text for measuring metal content. Also, some other instrumental techniques such as x-ray fluorescence, x-ray diffraction, and neutron activation analyses are suggested. Many refractory substances and also a number of salts can be characterized nondestructively by x-ray methods. Anions can be measured in aqueous solutions by ion chromatography, ion-selective electrodes, titration, and colorimetric reactions. Water of crystallization can be measured by simple gravimetry or thermogravimetric analysis. 

A -sulfinylacetamide 297 in greater than 90% yield when a catalytic amount of methyltrioxorhenium is employed. Futhermore, the hetero-Diels-Alder adduct is highly soluble in both chlorinated and ethereal solvents. A detailed investigation of the retro-Diels-Alder reaction of 298 by thermogravimetric analysis revealed an onset temperature of 120 °C and complete conversion of bicycle 298 to pentacene 296 at 160 °C, which are temperatures compatible with the polymer supports typically used in electronics applications. The electronic properties of these newly prepared OTFTs are similar to those prepared by traditional methods. Later improvements to this chemistry included the use of A -sulfinyl-/< r/-butylcarbamate 299 as the dienophile <2004JA12740>. The retro-Diels-Alder reaction of substrate 300 proceeds at much lower temperatures (130 °C, 5 min with FlTcatalyst 150 °C, Ih with no catalyst). 

Thermogravimetric analysis in combination with other spectroscopy methods indicated that the original particles contain larger amounts of ammonia, unreacted ethoxy groups, and a larger amount of hydroxyl groups in the interior of the particles. 

Powdering, or grinding, of samples is a simple preparation method required in a number of spectrometric and spectroscopic techniques, such as x-ray diffraction (XRD), nuclear magnetic resonance (NMR), differential thermal analysis (DTA), thermogravimetric analysis (TG), or ATR-FTIR spectroscopy. Control of the particle size during grinding must be taken into account in attempting to obtain reliable results. 

---