Tetrahydrofuran cyclopentadienyl complexes

Adjusting the MCl3-Na[Cp] ratio to unity results in the production of the cyclopentadienyl metal dichlorides isolated as the tris-tetrahydrofuranates . These complexes cannot be sublimed in vacuo and the synthesis is unsuccessful for M = La and Pr. Utilization of pentamethylcyclopentadienyllithium or -sodium affords the alkali metal chloride adducts - - ... 

The tris(cyclopentadienyl) complexes of the rare earths were the first compounds discovered and the most intensively investigated class of organometallic compounds of these elements. They were reported for the first time in 1954 by Wilkinson and Birmingham, and generally prepared by reaction of anhydrous rare earth trichlorides with sodium cyclopentadienide in tetrahydrofuran at room temperature and isolated by sublimation of the crude products in vacuum at about 220°C (Wilkinson and Birmingham, 1954 Krasnova et al., 1971) ... 

Bis(cyclopentadienyl)complexes have been isolated for the elements of the First Transition Series from vanadium to nickel inclusive and also for ruthenium and osmium. The most general method of preparation is to treat an anhydrous halide of the metal with sodium cyclopentadienide in tetrahydrofuran under an atmosphere of nitrogen or argon. 

Cyclopentadienyl complexes of lanthanoids(II) are known for samarium, europium and ytterbium [1-24] (Table III.L) One compound of Nd(II) is claimed as well [25], but its exact structure and the valent state of the neodymium atom apparently needs additional proves. Samarium derivatives are isolated as tetrahydrofuranates Cp2Sm(THF). In the case of europium and ytterbium solvent-free complexes are obtained. 

Cyclopentadienyls. When anhydrous transition metal halides react with sodium cyclopentadienide in tetrahydrofuran, ir cyclopentadienyl complexes often result, e.g. 

The reactions between cyclopropenes and carbon monoxide in the presence of transition metals have been of some use in synthesis,93 and in 1978 Binger initiated a study of the reactions between metal carbonyls and cyclopropenes in order to elucidate the generality of these reactions.75 It was found that dicarbonyl 775-cyclopentadienyl(tetrahydrofuran)manganese(I) reacted with 3,3-dime thy Icy clopropene at 0°C to produce -(vinylketene) complex 81 in fair yield. The only other transition metal in Binger s study that was found to react with 3,3-dimethylcyclopropene in this manner was iron (see Section VI,B). 

Reduction of cobalticenium halides by sodium borohydride in aqueous ethanol or by lithium aluminium hydride in tetrahydrofuran gives the neutral diamagnetic complex [Co(CsHe)(C6H6)](XXIV) in which one ir-cyclopentadienyl anion has been converted into cyclopentadiene (99) ... 

Mono-n-cyclopentadienylmagnesium compounds have so far only been isolated in the form of adducts with oxygen or nitrogen bases. The bis-(tetrahydrofuran) complexes of cyclopentadienyl(phenyl)- and -(methyl)-magnesium have been synthesized by Whitesides and co-workers (96) according to Eq. (4). 

Among the carbonylative cycloaddition reactions, the Pauson-Khand (P-K) reaction, in which an alkyne, an alkene, and carbon monoxide are condensed in a formal [2+2+1] cycloaddition to form cyclopentenones, has attracted considerable attention [3]. Significant progress in this reaction has been made in this decade. In the past, a stoichiometric amount of Co2(CO)8 was used as the source of CO. Various additive promoters, such as amines, amine N-oxides, phosphanes, ethers, and sulfides, have been developed thus far for a stoichiometric P-K reaction to proceed under milder reaction conditions. Other transition-metal carbonyl complexes, such as Fe(CO)4(acetone), W(CO)5(tetrahydrofuran), W(CO)5F, Cp2Mo2(CO)4, where Cp is cyclopentadienyl, and Mo(CO)6, are also used as the source of CO in place of Co2(CO)8. There has been significant interest in developing catalytic variants of the P-K reaction. Rautenstrauch et al. [4] reported the first catalytic P-K reaction in which alkenes are limited to reactive alkenes, such as ethylene and norbornene. Since 1994 when Jeong et al. [5] reported the first catalytic intramolecular P-K reaction, most attention has been focused on the modification of the cobalt catalytic system [3]. Recently, other transition-metal complexes, such as Ti [6], Rh [7], and Ir complexes [8], have been found to be active for intramolecular P-K reactions. 

Tetrakis-cyclopentadienyl cerium (CeCp4) has been reported to be formed by the reaction of bis(pyridinium) hexachlorocerate with sodium cyclopentadienide [17]. Similarly indenyl and fluorenyl derivatives were prepared. Later work showed the same reactants in tetrahydrofurane to yield, Ce(Cp3), tricyclopentadienyl cerium complex instead of Ce(Cp4) [18]. 

For a bulky substituted cyclopentadienyl group, such as CsMes and CsMeaR (R = Et, Pr, SiMes), tris(cyclopentadienyl) lanthanide complexes cannot be prepared via the above metathesis reaction because of the steric hindrance. The reaction of anhydrous LnCls with three equivalents of alkali metal pentamethylcyclopentadienyl in THF (tetrahydrofuran) led to the THF ring-opened product (Equation 8.4) [8]. 

To make the reactive fulleride compound KeCeo in the Fe-Ceo synthesis, fullerenes and a slight excess of potassium were sealed in a glass tube under vacuum and heated for approximately four days at 250 °C. Both solid-state NMR and Raman spectroscopy were employed to determine that the KeCeo compound was in fact synthesized. The KeCeo product was then reacted in an inert atmosphere with cyclopentadienyl-iron-dicarbonyl-iodide (CpFe(CO)2l) in tetrahydrofuran (THF) to form the complex. The recovered product was dried in an inert atmosphere. Manipulations of air-sensitive materials were carried out in a glove box or using standard Schlenk techniques. THF was distilled just prior to use from sodium benzophenone ketyl. Ceo was obtained from Aldrich, and CpFeCCOjol was obtained from Strew. 

The colorless zinc compound, Zn(CisH6)2, which sublimes at 160° under partial decomposition, is obtained in small yield from zinc chloride and cyclopentadienyl sodium in diethyl ether however, the less stable cadmium compound decomposes, with separation of cadmium, under these conditions (55). The mercury compound, Hg(CsH5)2, is produced in 20% yield by the action of the sodium derivative on mercuric chloride in tetrahydrofuran (215). The action of cyclopentadiene on the complex K2(HgI ) in aqueous alkaline solution results in the precipitation of a mixture of CsHsHgl and Hg(CsH6)2, from which the latter compound may be obtained in good yield by extraction with a mixture of tetrahydrofuran and petroleum ether (62). It forms pale yellow crystals which begin to decompose at about 60° and which melt at 83-85°. The compound is readily soluble in most solvents it decomposes slowly even when kept in the dark at room temperature it is insoluble in water and reacts with neither water nor bases. On the other hand, decomposition occurs in dilute hydrochloric acid. It converts ferric chloride to ferrocene quantitatively, and it yields an adduct with maleic anhydride (215). 

Ruthenium, the homologue of iron in this group, was also shown to form complexes quite early. Ruthenocene, Ru( 5H5)2, is obtained by treatment of the acetylacetonate of tervalent ruthenium with five times the theoretical quantity of the Grignard reagent (206), or, better, by the action of cyclopentadienyl sodium on ruthenium trichloride in tetrahydrofuran (47). It forms pale yellow scales which sublime at 120° and melt at 200°. Its properties are closely similar to those of ferrocene it is soluble in organic solvents, and in the absence of air is not attacked by bases or by sulfuric or hydrochloric acid. Oxidation converts it into the pale yellow [Ru( 5H6)2] + ion. 

Norbornene oxide can react with a Z zs-(cyclopentadienyl)(ferf-butylimido)-zirconium complex (Cp2Zr=N-f-Bu) tetrahydrofuran (THF) to produce the... 

---