Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Suspensions inorganic

The first option is the application of two-component flocculants of opposite charge, which are added step by step (Fig. 1, top). During the flocculation process an interaction can occur between the two flocculants PA and PC, resulting in the formation of PECs, as well as between the polymer (mostly PC) and the suspension (inorganic particles or fibers). A summary of former results and recent developments will be presented in Sect. 2. [Pg.29]

If an appreciable amount of residue remains, note its colour. Add a few drops of water and test the solution (or suspension) with htmus or with Universal indicator paper. Then add a httle dilute hydrochloric acid and observe whether efiervesceiice occurs and the residue dissolves. Apply a flame test with a platinum wire on the hydrochloric acid solution to determine the metal present. (In rare cases, it may be necessary to subject a solution of the residue to the methods of qualitative inorganic analysis to identify the metal or metals present.) If the flame test indicates sodium, repeat the ignition of the substance on platinum foil. [Pg.1038]

Inorganic Materials. Sol—gel chemistry involves first the formation of a sol, which is a suspension of soHd particles in a Hquid, then of a gel, which is a diphasic material with a soHd encapsulating a solvent. A detailed description of the fundamental chemistry is available in the Hterature (2—4). The chemistry involving the most commonly used precursors, the alkoxides (M(OR) ), can be described in terms of two classes of reactions ... [Pg.1]

Suitable protective coUoids for the preparation of acryhc suspension polymers include ceUulose derivatives, polyacrylate salts, starch, poly(vinyl alcohol), gelatin, talc, clay, and clay derivatives (95). These materials are added to prevent the monomer droplets from coalescing during polymerisation (110). Thickeners such as glycerol, glycols, polyglycols, and inorganic salts ate also often added to improve the quahty of acryhc suspension polymers (95). [Pg.169]

Synthetic organic chelates and natural organic complexes are sometimes more effective agronomically per unit of micronuttient than inorganic forms, but the organic materials are more expensive. The chelates can be used with both orthophosphate and polyphosphate Hquids and suspensions. [Pg.243]

A fourth mechanism is called sweep flocculation. It is used primarily in very low soflds systems such as raw water clarification. Addition of an inorganic salt produces a metal hydroxide precipitate which entrains fine particles of other suspended soflds as it settles. A variation of this mechanism is sometimes employed for suspensions that do not respond to polymeric flocculants. A soHd material such as clay is deUberately added to the suspension and then flocculated with a high molecular weight polymer. The original suspended matter is entrained in the clay floes formed by the bridging mechanism and is removed with the clay. [Pg.34]

Sprays are the most common means of insecticide appHcation and generally involve the use of water as the principal carrier, although volatile oils sometimes are used. With the older inorganic insecticides, suspensions in water were used at dilutions of 0.1 ndash 0.2%. The development of the more effective organic insecticides has allowed the widespread use of concentrate sprays in which the toxicant is contained at 10 ndash 98% and the amount of carrier to be appHed is enormously reduced. The use of concentrate or ultralow volume sprays has brought about a revolution in spray equipment away... [Pg.301]

NaOH solution is added dropwise to an aqueous suspension of this ester at 40—70°C over 1 h and the reaction mixture kept for 2 h to give 86.6% DHNA of 98.7% purity (74), which is then esterified with (CgH O) to obtain PDNA. The esterification process is dramatically improved by adding a small amount of inorganic or organic acid, preferably methanesulfonic acid, benzene sulfonic acid, or naphthalene sulfonic acid subsequent isolation and crystallisation gives a pure product (75). [Pg.500]

Inorganic and organic coUoidal suspensions in wastewater can be removed by chemical coagulation. Coagulation has been defined as the addition of... [Pg.182]

Tyj)e of dryer Applicable with dry-product recirculation True and colloidal solutions emulsions. Examples inorganic salt solutions, extracts, milk, blood, waste liquors, rubber latex, etc. Pumpable suspensions. Examples pigment slurries, soap and detergents, calcium carbonate, bentonite, clay sbp, lead concentrates, etc. does not dust. Recirculation of product may prevent sticking Examples filter-press cakes, sedimentation sludges, centrifuged sobds, starch, etc. [Pg.1189]

Two other methods worth discussing are wet air oxidation and regeneration by steam. Wet oxidation may be defined as a process in which a substance in aqueous solution or suspension is oxidized by oxygen transferred from a gas phase in intimate contact with the liquid phase. The substance may be organic or inorganic in nature. In this broad definition, both the well known oxidation of ferrous salts to ferric salts by exposure of a solution to air at room temperature and the adsorption of oxygen by alkaline pyrogallol in the classical Orsat gas analysis would be considered wet oxidations. [Pg.318]

A solution of 3jS-hydroxy-5a-androstan-17-one tosylate (193, 60 mg) in tetrahydrofuran (10 ml, freshly distilled from lithium aluminum hydride) is added dropwise to a boiling suspension of lithium aluminum deuteride (60 mg) in tetrahydrofuran (10 ml). The resulting suspension is heated under reflux for 30 min and after cooling the excess reagent is decomposed by the careful addition of a few drops of water. The heating is continued for a few minutes to coagulate the inorganic salts which are removed by filtration... [Pg.198]

The temperature is again lowered to 20°C to 25°C and maintained at this value by cooling with ice while 500 ml methanol are added drop by drop. The resulting solution is admixed drop by drop to a suspension of 240 g powdered caustic soda in 800 ml methanol at 20°C to 25°C. After mixing is completed, stirring is continued for 30 minutes at room temperature. The solution now contains inorganic salts and /3-dlmethylamino-a-methoxyethoxyacroleln. [Pg.737]

The dicyclobutanecarbonyl derivative (136.7 g) was dissolved in 200 ml of tetrahydrofuran and added dropwise to a suspension of 34.2 g of lithium aluminum hydride in 1 liters of tetrahydrofuran. The temperature of the mixture rose to reflux during the addition. Reflux was maintained for 2 hours after the addition was completed. After cooling, 110 ml of ethyl acetate was added dropwise, followed by 30 ml of water, followed by a solution of 53 g of ammonium chloride in 125 ml of water. The resulting mixture was filtered and the inorganic precipitate was washed with methanol. Evaporation of the combined filtrates gave 66 g of N-cyclobutYlmethyl-14-hYdroxydihydronormorphinone, melting point 229 to 231 . ... [Pg.1051]


See other pages where Suspensions inorganic is mentioned: [Pg.260]    [Pg.260]    [Pg.322]    [Pg.2669]    [Pg.18]    [Pg.33]    [Pg.36]    [Pg.21]    [Pg.268]    [Pg.16]    [Pg.175]    [Pg.547]    [Pg.46]    [Pg.12]    [Pg.121]    [Pg.125]    [Pg.459]    [Pg.230]    [Pg.416]    [Pg.393]    [Pg.395]    [Pg.300]    [Pg.316]    [Pg.24]    [Pg.216]    [Pg.72]    [Pg.194]    [Pg.77]    [Pg.6]    [Pg.42]    [Pg.80]    [Pg.53]    [Pg.132]    [Pg.160]    [Pg.349]    [Pg.5]    [Pg.7]    [Pg.10]   
See also in sourсe #XX -- [ Pg.216 , Pg.239 ]




SEARCH



© 2024 chempedia.info