Surface solid particles

In 1842, Christian Doppler discovered that the wavelength of sound is a function of the receiver s movement. The transmitter of a Doppler flowmeter projects an ultrasonic beam into the flowing stream and detects the reflected frequency, which is shifted in proportion to stream velocity. The difference between the transmitted and reflected velocities is called the beat frequency, and its value relates to the velocity of the reflecting surfaces (solid particles and gas bubbles) in the process stream. For accurate readings it is important that the ultrasonic radiation be reflected from a representative portion of the flow stream. The main advantage of Doppler meters is their low cost, which does not increase with pipe size, whereas their main limitation is that they are not suitable for the measurement of clean fluids or gases. 

Often, particulate matter acts as a carrier for gases, vapors, and fumes adsorbed onto their surface (solid particles) or dissolved within them (liquid particles) this increases the residence time of such pollutants in specific areas of the lung and imposes an additional task on the pulmonary defense mechanisms. 

The final step in the dry deposition process is actual uptake of the vapor molecules or particles by the surface. Gaseous species may absorb irreversibly or reversibly into the surface particles simply adhere. The amount of moisture on the surface and its stickiness are important factors at this step. For moderately soluble gases, such as S02 and O3, the presence of surface moisture can have a marked effect on whether the molecule is actually removed. For highly soluble and chemically reactive gases, such as HNO3, deposition is rapid and irreversible on almost any surface. Solid particles may bounce off a smooth surface liquid particles are more likely to adhere upon contact. 

The parts should always be degreased prior to abrasive treatment to prevent contaminants from being rubbed into the surface. Solid particles left on the surfaces after abrading can be removed by blasts of clean, oil free, dry air or solvent wiping. 

Flotation. Flotation is a gravity separation process which exploits differences in the surface properties of particles. Gas bubbles are generated in a liquid and become attached to solid particles or immiscible liquid droplets, causing the particles or droplets to rise to the surface. This is used to separate mixtures of solid-solid particles and liquid-liquid mixtures of finely divided immiscible droplets. It is an important technique in mineral processing, where it is used to separate different types of ore. 

When used to separate solid-solid mixtures, the material is ground to a particle size small enough to liberate particles of the chemical species to be recovered. The mixture of solid particles is then dispersed in the flotation medium, which is usually water. Gas bubbles become attached to the solid particles, thereby allowing them to float to the surface of the liquid. The solid partices are collected from the surface by an overflow weir or mechanical scraper. The separation of the solid particles depends on the different species having different surface properties such that one species is preferentially attached to the bubbles. A number of chemicals are added to the flotation medium to meet the various requirements of the flotation process ... 

Filtration. In filtration, suspended solid particles in a liquid or gas are removed by passing the mixture through a porous medium that retains the particles and passes the fluid. The solid can be retained on the surface of the filter medium, which is cake, filtration, or captured within the filter medium, which is depth filtration. The filter medium can be arranged in many ways. 

Interesting pattern formations also occur in surfactants spreading on water due to a hydrodynamic instability [52]. The spreading velocity from a crystal may vary with direction, depending on the contour and crystal facet. There may be sufficient imbalance to cause the solid particle to move around rapidly, as does camphor when placed on a clean water surface. The many such effects have been reviewed by Stemling and Scriven [53]. 

The adhesion between two solid particles has been treated. In addition to van der Waals forces, there can be an important electrostatic contribution due to charging of the particles on separation [76]. The adhesion of hematite particles to stainless steel in aqueous media increased with increasing ionic strength, contrary to intuition for like-charged surfaces, but explainable in terms of electrical double-layer theory [77,78]. Hematite particles appear to form physical bonds with glass surfaces and chemical bonds when adhering to gelatin [79]. 

A very important but rather complex application of surface chemistry is to the separation of various types of solid particles from each other by what is known as flotation. The general method is of enormous importance to the mining industry it permits large-scale and economic processing of crushed ores whereby the desired mineral is separated from the gangue or non-mineral-containing material. Originally applied only to certain sulfide and oxide ores. 

Clearly, it is important that there be a large contact angle at the solid particle-solution-air interface. Some minerals, such as graphite and sulfur, are naturally hydrophobic, but even with these it has been advantageous to add materials to the system that will adsorb to give a hydrophobic film on the solid surface. (Effects can be complicated—sulfur notability oscillates with the number of preadsoibed monolayers of hydrocarbons such as n-heptane [76].) The use of surface modifiers or collectors is, of course, essential in the case of naturally hydrophilic minerals such as silica. 

The cleaning process proceeds by one of three primary mechanisms solubilization, emulsification, and roll-up [229]. In solubilization the oily phase partitions into surfactant micelles that desorb from the solid surface and diffuse into the bulk. As mentioned above, there is a body of theoretical work on solubilization [146, 147] and numerous experimental studies by a variety of spectroscopic techniques [143-145,230]. Emulsification involves the formation and removal of an emulsion at the oil-water interface the removal step may involve hydrodynamic as well as surface chemical forces. Emulsion formation is covered in Chapter XIV. In roll-up the surfactant reduces the contact angle of the liquid soil or the surface free energy of a solid particle aiding its detachment and subsequent removal by hydrodynamic forces. Adam and Stevenson s beautiful photographs illustrate roll-up of lanoline on wood fibers [231]. In order to achieve roll-up, one requires the surface free energies for soil detachment illustrated in Fig. XIII-14 to obey... 

Erosion is the deterioration of a surface by the abrasive action of solid particles in a liquid or gas, gas bubbles in a liquid, liquid droplets in a gas or due to (local) high-flow velocities. This type of attack is often accompanied by corrosion (erosion-corrosion). The most significant effect of a joint action of erosion and corrosion is the constant removal of protective films from a metal s surface. This can also be caused by liquid movement at high velocities, and will be particularly prone to occur if the solution contains solid particles that have an abrasive action. 

A colloid is a material that exists ia a finely dispersed state. It is usually a solid particle, but it may be a Hquid droplet or a gas bubble. Typically, coUoids have high surface-area-to-volume ratios, characteristic of matter ia the submicrometer-size range. Matter of this size, from approximately 100 nm to 5 nm, just above atomic dimensions, exhibits physicochemical properties that differ from those of both the constituent atoms or molecules and the macroscopic material. The differences ia composition, stmcture, and iateractions between the surface atoms or molecules and those on the iaterior of the colloidal particle lead to the unique character of finely divided material, specifics of which can be quite diverse (see Flocculating agents). 

Retention of a given solids particle in the system is on the average veiy short, usually no more than a few seconds. This means that any process conducted in a pneumatic system cannot be diffusion-controlled. The reaction must be mainly a surface phenomenon, or the solids particles must be veiy small so that heat transfer and mass transfer from the interiors are essentially instantaneous. 

Washing in a continuous decanter is fairlv effective on solid particles larger than 80 jlrn (200 mesh), provided the particles are reasonably uniform in size with porous structure, Othenvise, the vv ash tlovvvs across the cake surface with little penetration because the pores at the cake surface are plugged bv fines. Rinsing efficiency, the proportion of soluble impurities displaced from the solids, is in the range of 50 to 80... 

Albertsson (Paiiition of Cell Paiiicle.s and Macromolecules, 3d ed., Wiley, New York, 1986) has extensively used particle distribution to fractionate mixtures of biological products. In order to demonstrate the versatility of particle distribution, he has cited the example shown in Table 22-14. The feed mixture consisted of polystyrene particles, red blood cells, starch, and cellulose. Liquid-liquid particle distribution has also been studied by using mineral-matter particles (average diameter = 5.5 Im) extracted from a coal liquid as the solid in a xylene-water system [Prudich and Heniy, Am. Inst. Chem. Eng. J., 24(5), 788 (1978)]. By using surface-active agents in order to enhance the water wettability of the solid particles, recoveries of better than 95 percent of the particles to the water phase were obsei ved. All particles remained in the xylene when no surfactant was added. 

Usually, particle size has relatively little effect on Raman line shapes unless the particles are extremely small, less than 100 nm. For this reason, high-quality Raman spectra can be obtained from powders and from polycrystalline bulk specimens like ceramics and rocks by simply reflecting the laser beam from the specimen surface. Solid samples can be measured in the 90° scattering geometry by mounting a slab of the solid sample, or a pressed pellet of a powder sample so that the beam reflects from the surface but not into the entrance slit (Figure 3). 

A number of olefins may be polymerised using certain metal oxides supported on the surface of an inert solid particle. The mechanism of these polymerisation reactions is little understood but is believed to be ionic in nature. 

The drying a chemical substance is not a simple process. Drying a mass of finely divided solid particles carrying 30 to 40% water, for example the rate of evaporation is constant and high as long as the surfaces exposed are wet. After the surface is dry, the water in the interstices must make its way to the surface, a process of diffusion that is slower than evaporation from a wet surface the rate will then drop. This second part of the process must be modified according to the case with which the material crumbles as it dries, exposing new surfaces. 

Filtration is a fundamental unit operation that, within the context of this volume, separates suspended particle matter from water. Although industrial applications of this operation vary significantly, all filtration equipment operate by passing the solution or suspension through a porous membrane or medium, upon which the solid particles are retained on the medium s surface or within the pores of the medium, while the fluid, referred to as the filtrate, passes through. 

---