Sulfuric acid concentrative properties

Table 5.4 Effects of redox-site loading and sulfuric acid concentration on the charge-transport properties as obtained by cyclic voltammetry of [Os(bpy)2(PVP) Cl]Cl films.

Verbragge and Hill [77] have compared protonic conductivities of several different Nafion and Dow samples immersed in sulfuric acid solutions at various temperatures. Conductivities on the order of 0.06-0.085 S/cm were reported for the acid-immersed Nafion samples at 22 °C. The immersed Dow membrane samples exhibited somewhat higher conductivity (0.13-0.14 S/cm) at this temperature. These data were reported for membranes in contact with a minimum concentration of 0.3 m H2SO4 and are dependent on the sulfuric acid concentration. This study [77] presents a model of water and ion distribution based on properties of pores in the ionomer. The model, which uses Poisson s equation to describe electric potential variation in the pore, is successful in describing experimental acid partitioning results. Other earlier reports of protonic conductivity in ionomeric membranes have been given by Slade et al. [72] and by Eisman [60]. 

Alcohols dissolve in cold concentrated sulfuric acid. This property they share with alkenes, amines, practically all compounds containing oxygen, and easily sulfonated compounds. (Alcohols, like other oxygen-containing compounds, form oxonium salts, which dissolve in the highly polar sulfuric acid.)... 

Properties Black, crystalline powder. D 4.80, mp 1185C Mohs hardness 1, coefficient of friction 0.02-0.06. Soluble in aqua regia, sulfuric acid (concentrated) insoluble in water. 

Molybdenum in combination with chromium increases the corrosion-resistant properties of ferritic stainless steel in chloride electrolytes and is effective in increasing the resistance to pitting and crevice corrosion. Cr-Ni-Mo-Cu alloys increase the passivity in sulfuric acid concentrations with concentrations between 20% and 70%. Nickel... 

That numerous 2-amino-5-nitrothiazole derivatives exhibit antiamebic, antihistomonal, antitrichomonal, and antischistosomal properties (see Section VI.2) explains the large number of nitration reactions reported. Nitration in a mixture of concentrated nitric and concentrated sulfuric acids IS among the most common experimental methods (16, 27, 58, 374-377). 

Anhydrous aluminum triduotide, A1F., is a white crystalline soHd. Physical properties are Hsted ia Table 2. Aluminum duotide is spatingly soluble ia water (0.4%) and iasoluble ia dilute mineral acids as well as organic acids at ambient temperatures, but when heated with concentrated sulfuric acid, HF is hberated, and with strong alkah solutions, aluminates are formed. A1F. is slowly attacked by fused alkahes with the formation of soluble metal duotides and aluminate. A series of double salts with the duotides of many metals and with ammonium ion can be made by precipitation or by soHd-state reactions. 

Niobic Acid. Niobic acid, Nb20 XH2O, includes all hydrated forms of niobium pentoxide, where the degree of hydration depends on the method of preparation, age, etc. It is a white insoluble precipitate formed by acid hydrolysis of niobates that are prepared by alkaH pyrosulfate, carbonate, or hydroxide fusion base hydrolysis of niobium fluoride solutions or aqueous hydrolysis of chlorides or bromides. When it is formed in the presence of tannin, a volurninous red complex forms. Freshly precipitated niobic acid usually is coUoidal and is peptized by water washing, thus it is difficult to free from traces of electrolyte. Its properties vary with age and reactivity is noticeably diminished on standing for even a few days. It is soluble in concentrated hydrochloric and sulfuric acids but is reprecipitated on dilution and boiling and can be complexed when it is freshly made with oxaHc or tartaric acid. It is soluble in hydrofluoric acid of any concentration. 

Thermo dynamic data for nitric acid are given ia Table 2. Properties for the ternary systems sulfuric acid—nitric acid—water (5,14) and magnesium nitrate—nitric acid—water (11,15—17) used ia processes for concentrating nitric acid are available. 

The concentrated mother Hquor contains a large amount of sulfuric acid in a free form, as titanium oxy-sulfate, and as some metal impurity sulfates. To yield the purest form of hydrated TiOg, the hydrolysis is carried out by a dding crystallizing seeds to the filtrate and heating the mixture close to its boiling temperature, - 109° C. The crystal stmcture of the seeds (anatase or mtile) and their physical properties affect the pigmentary characteristics of the final product. 

Sulfosahcyhc acid is prepared by heating 10 parts of sahcyhc acid with 50 parts of concentrated sulfuric acid, by chlorosulfonation of sahcyhc acid and subsequent hydrolysis of the acid chloride, or by sulfonation with hquid sulfur trioxide in tetrachloroethylene. It is used as an intermediate in the production of dyestuffs, grease additives, catalysts, and surfactants. It is also useful as a colorimetric reagent for ferric iron and as a reagent for albumin. Table 9 shows the physical properties of sahcyhc acid derivatives. 

Descriptions of sulfuric acid analytical procedures not specified by ASTM are available (32,152). Federal specifications also describe the requited method of analysis. Concentrations of 78 wt % and 93 wt % H2SO4 are commonly measured indirectly by determining specific gravity. Higher acid concentrations are normally determined by titration with a base, or by sonic velocity or other physical property for plant control. Sonic velocity has been found to be quite accurate for strength analysis of both filming and nonfuming acid. 

The corrosion behavior of tantalum is weU-documented (46). Technically, the excellent corrosion resistance of the metal reflects the chemical properties of the thermal oxide always present on the surface of the metal. This very adherent oxide layer makes tantalum one of the most corrosion-resistant metals to many chemicals at temperatures below 150°C. Tantalum is not attacked by most mineral acids, including aqua regia, perchloric acid, nitric acid, and concentrated sulfuric acid below 175°C. Tantalum is inert to most organic compounds organic acids, alcohols, ketones, esters, and phenols do not attack tantalum. 

Hydrolysis of solutions of Ti(IV) salts leads to precipitation of a hydrated titanium dioxide. The composition and properties of this product depend critically on the precipitation conditions, including the reactant concentration, temperature, pH, and choice of the salt (46—49). At room temperature, a voluminous and gelatinous precipitate forms. This has been referred to as orthotitanic acid [20338-08-3] and has been represented by the nominal formula Ti02 2H20 (Ti(OH). The gelatinous precipitate either redissolves or peptizes to a colloidal suspension ia dilute hydrochloric or nitric acids. If the suspension is boiled, or if precipitation is from hot solutions, a less-hydrated oxide forms. This has been referred to as metatitanic acid [12026-28-7] nominal formula Ti02 H2O (TiO(OH)2). The latter precipitate is more difficult to dissolve ia acid and is only soluble ia concentrated sulfuric acid or hydrofluoric acid. 

Thermal Fixation Properties of Disperse Dyes on Polyester—Gotton. This method assesses the fixation properties of disperse dyes as a function of the time, temperature, dyestuff concentration, or presence and amount of auxiUary agents. The polyester—cotton fabric is padded and dried, the cotton dissolved in sulfuric acid and washed out of the blend, and the amount of dye on the polyester component assessed by either reflectance or measuring the optical density of a solution of dye obtained by extracting the dye with boiling chloroben2ene solvent. 

---