Sulfur alcohols

The pendant hydroxy groups of ethylene oxide-propylene oxide copolymers of dihydroxy and trihydroxy alcohols may be sulfurized to obtain a sulfurized alcohol additive. This is effective as a lubricant in combination with oils and fats [387,533]. The sulfurized alcohols may be obtained by the reaction of sulfur with an unsaturated alcohol. Furthermore, fatty alcohols and their mixtures with carboxylic acid esters as lubricant components [1286] have been proposed. 

Cortisporin Otic suspension Polymyxin B Hydrocortisone (1%) Sulfuric Alcohol Propylene glycol... 

In the case of spark ignition engines, the best options for fuels include highly reformulated gasoline with virtually no sulfur alcohols derived from biomass natural gas or as the infrastructure develops, hydrogen. 

Sometimes analyses are required for particular compounds such as sulfur, chlorine and lead, or for specific components such as mercaptans, hydrogen sulfide, ethers and alcohols. 

As mentioned in Section IX-2A, binary systems are more complicated since the composition of the nuclei differ from that of the bulk. In the case of sulfuric acid and water vapor mixtures only some 10 ° molecules of sulfuric acid are needed for water oplet nucleation that may occur at less than 100% relative humidity [38]. A rather different effect is that of passivation of water nuclei by long-chain alcohols [66] (which would inhibit condensation note Section IV-6). A recent theoretical treatment by Bar-Ziv and Safran [67] of the effect of surface active monolayers, such as alcohols, on surface nucleation of ice shows the link between the inhibition of subcooling (enhanced nucleation) and the strength of the interaction between the monolayer and water. 

To be able to prepare and study these elusive species in stable form, acids billions of times stronger than concentrated sulfuric acid were needed (so called superacids). Some substituted carbocations, however, are remarkably stable and are even present in nature. You may be surprised to learn that the fine red wine we drank tonight contained carbocations which are responsible for the red color of this natural 12% or so alcoholic solution. I hope you enjoyed it as much as I did. 

The literature states that if one uses ice cold, concentrated sulfuric acid on a terminal alkene (a.k.a. allylbenzene) an alcohol (OH) intermediate will form Markovnikoviy on the secondary carbon (don t ask). What does this mean Let s take an example. Say one has some elemi oil and wants that elemicin that is in it. What one can do is chili, say, 500mLs of the oil to freezing and do the same for about 100-200mLs of concentrated sulfuric acid (at least 90% cone.). Next, one just mixes the two together for about 5 min. What will happen is that the cold H2SO4 will make a hydrogen... 

For the past year Strike had been in consultation with contract labs over the making of phenylisopropyl alcohols using sulfuric acid and allylbenzenes (don t ask). The lab owners would listen patiently as Strike primitively described how and why an OH should go on the beta carbon. And without exception, the lab owners would point out to Strike that the best way to get an OH on the beta carbon would be to put a Br there first. But Strike don t wanna put a Br there first Strike would say, Strike wants the OH put on directly using sulfuric acid " The lab guys had to do what Strike said because Strike was holding all the money (...a fool and her money etc.). But out of curiosity Strike asked how they would get that Br on the beta carbon. Every one of them said it was simply a matter of using the 48% HBr in acetic acid. They even showed Strike their stock solutions (usually from Aldrich or Fisher). 

An interesting set of results was obtained by Burmistrov et al, (242. 444-448) when they studied the reaction of 2-aminothiazole and derivatives with various alcohols in concentrated sulfuric acid (see Section III.l.Cl. 

The reaction is carried out at low temperature in aqueous medium and then allowed to stand overnight (221). Ammonium thiocarbamate is prepared from a cold saturated solution of ammonium thiocyanate, which is gradually added to dilute sulfuric acid at 25°C. The liberated carbonyl sulfide is passed into a saturated solution of alcoholic ammonia at about 10°C (221). The fairly low yield indicates that the reaction has not been greatly developed. 

The a-thiocyanatoketones are easily obtainable from a-halocarbonyl compounds and metal thiocyanates (sodium, potassium, barium, or lead thiocyanate) (416, 484, 519, 659) in an alcoholic solution. Yields ranged from 80 to 95%. They are very sensitive substances that isomerize when reacted upon by acids, bases, or labile hydrogen and sulfur compounds. 

Other sulfur compounds such as thiourea, ammonium dithiocarbamate, or hydrogen sulfide also lead to 2-mercaptothiazoles. Thus thiourea has been used in the syntheses of 4,5-dimethyl (369) and 4-aryl-2-mercapto-thiazoles (Table 11-30) (519). The reactions were carried out by condensing the ia -thiocyanatoketones with thiourea in alcohol and water acidified with hydrochloric acid. By this procedure, 4-aryl-2-mercaptothiazoles were obtained in yields of 40 to 80% with bis-(4-aryl-2-thiazolyl) sulfides as by-products (519). These latter products (194) have also been observed as a result of the action of thiourea on 2-chloro-4-arylthiazole under the same experimental conditions. They can be separated from 2-mercaptothiazoles because of their different degrees of solubility in sodium hydroxide solution at 5%. In this medium bis-(4-phenyl-2-thiazolyl)sulfide is... 

The same kind of transformation may be carried out by heating an alcohol with sodium bromide and sulfuric acid... 

Thionyl chloride reacts with alcohols to give alkyl chlorides The inorganic byprod nets m the reaction sulfur dioxide and hydrogen chloride are both gases at room tern perature and are easily removed making it an easy matter to isolate the alkyl chloride... 

Sulfuric acid (H2SO4) and phosphoric acid (H3PO4) are the acids most frequently used m alcohol dehydrations Potassium hydrogen sulfate (KHSO4) is also often used... 

Alkyl hydrogen sulfates can be converted to alcohols by heating them with water This IS called hydrolysis, because a bond is cleaved by reaction with water It is the oxygen-sulfur bond that is broken when an alkyl hydrogen sulfate undergoes hydrolysis... 

The combination of sulfuric acid addition to propene followed by hydrolysis of the resulting isopropyl hydrogen sulfate is the major method by which over 10 lb of isopropyl alcohol is prepared each year m the United States... 

Unlike the addition of concentrated sulfuric acid to form alkyl hydrogen sulfates this reaction is carried out m a dilute acid medium A 50% water/sulfuric acid solution is often used yielding the alcohol directly without the necessity of a separate hydrolysis step Markovmkov s rule is followed... 

According to Le Chatelier s principle, a system at equilibrium adjusts so as to mini mize any stress applied to it When the concentration of water is increased the system responds by consuming water This means that proportionally more alkene is converted to alcohol the position of equilibrium shifts to the right Thus when we wish to pre pare an alcohol from an alkene we employ a reaction medium m which the molar con centration of water is high—dilute sulfuric acid for example... 

Although 2 methylpropene undergoes acid catalyzed hydration m dilute sulfuric acid to form tert butyl alcohol (Section 6 10) a different reaction occurs m more concentrated solutions of sulfuric acid Rather than form the expected alkyl hydrogen sulfate (see Sec tion 6 9) 2 methylpropene is converted to a mixture of two isomeric C Hig alkenes... 

As a method for the preparation of alkenes a weakness in the acid catalyzed dehydration of alcohols IS that the initially formed alkene (or mixture of alkenes) sometimes isomenzes under the conditions of its formation Write a stepwise mechanism showing how 2 methyl 1 butene might isomenze to 2 methyl 2 butene in the presence of sulfuric acid... 

Treatment of the alcohol whose structure is shown here with sulfuric acid gave as the major organic product a tncychc hydrocarbon of molecular formula CigHig Suggest a reasonable struc ture for this hydrocarbon... 

Deuterium does not give a signal under the conditions of H NMR spectroscopy Thus replacement of a hydroxyl proton by deuterium leads to the disappearance of the OH peak of the alcohol Protons bonded to nitrogen and sulfur also undergo exchange with... 

Primary alcohols are converted to ethers on heating m the presence of an acid catalyst usually sulfuric acid... 

When applied to the synthesis of ethers the reaction is effective only with primary alcohols Elimination to form alkenes predominates with secondary and tertiary alcohols Diethyl ether is prepared on an industrial scale by heating ethanol with sulfuric acid at 140°C At higher temperatures elimination predominates and ethylene is the major product A mechanism for the formation of diethyl ether is outlined m Figure 15 3 The individual steps of this mechanism are analogous to those seen earlier Nucleophilic attack on a protonated alcohol was encountered m the reaction of primary alcohols with hydrogen halides (Section 4 12) and the nucleophilic properties of alcohols were dis cussed m the context of solvolysis reactions (Section 8 7) Both the first and the last steps are proton transfer reactions between oxygens... 

Step 1 Proton transfer from the acid catalyst (sulfuric acid) to the oxygen of the alcohol to produce an alkyloxonmm ion... 

---