Sulfides, double

The reactivity of the allylic sulfide double bond with electrophiles is largely masked by the presence of the heteroatom. However, on oxidation to the sulfone the alkene is found to be surprisingly inert toward such species, and this has been taken as further evidence for a transannular effect of the —SO2— unit greater than that seen for the sulfur atom in tetrahydrothiopyrans (77MI22502). 

Infrared spectral data for sulfur-containing compounds are covered in this section. Included here are single-bonded compounds (mercaptans or thiols and sulfides). Double-bonded S=0 compounds are also included in this section. 

The highly regio- and diastereoselective addition of an alkyl and an arylthio group to an olefinic double bond ( carbosulfenylation ) is achieved with arenesulfenyl chlorides and alkyl-chloro-titanium(IV) species (Reetz reagent, from R2Zn/TiCU 5 1 M. T. Reetz, 1987, 1989), Use of the more bulky 2,4,6-triisopropylbenzenesulfenyl chloride improves the yield of the highly versatile alkyl aryl sulfide products. 

Two efficient syntheses of strained cyclophanes indicate the synthetic potential of allyl or benzyl sulfide intermediates, in which the combined nucleophilicity and redox activity of the sulfur atom can be used. The dibenzylic sulfides from xylylene dihalides and -dithiols can be methylated with dimethoxycarbenium tetrafiuoroborate (H. Meerwein, 1960 R.F. Borch, 1968, 1969 from trimethyl orthoformate and BFj, 3 4). The sulfonium salts are deprotonated and rearrange to methyl sulfides (Stevens rearrangement). Repeated methylation and Hofmann elimination yields double bonds (R.H. Mitchell, 1974). 

The limitations of this reagent are several. It caimot be used to replace a single unactivated halogen atom with the exception of the chloromethyl ether (eq. 5) to form difluoromethyl fluoromethyl ether [461 -63-2]. It also caimot be used to replace a halogen attached to a carbon—carbon double bond. Fluorination of functional group compounds, eg, esters, sulfides, ketones, acids, and aldehydes, produces decomposition products caused by scission of the carbon chains. 

Dibromoborane—dimethyl sulfide is a more convenient reagent. It reacts directly with alkenes and alkynes to give the corresponding alkyl- and alkenyldibromoboranes (120—123). Dibromoborane differentiates between alkenes and alkynes hydroborating internal alkynes preferentially to terminal double and triple bonds (123). Unlike other substituted boranes it is more reactive toward 1,1-disubstituted than monosubstituted alkenes (124). 

Among chiral dialkylboranes, diisopinocampheylborane (8) is the most important and best-studied asymmetric hydroborating agent. It is obtained in both enantiomeric forms from naturally occurring a-pinene. Several procedures for its synthesis have been developed (151—153). The most convenient one, providing product of essentially 100% ee, involves the hydroboration of a-pinene with borane—dimethyl sulfide in tetrahydrofuran (154). Other chiral dialkylboranes derived from terpenes, eg, 2- and 3-carene (155), limonene (156), and longifolene (157,158), can also be prepared by controlled hydroboration. A more tedious approach to chiral dialkylboranes is based on the resolution of racemates. /n j -2,5-Dimethylborolane, which shows excellent enantioselectivity in the hydroboration of all principal classes of prochiral alkenes except 1,1-disubstituted terminal double bonds, has been... 

Bina Selenides. Most biaary selenides are formed by beating selenium ia the presence of the element, reduction of selenites or selenates with carbon or hydrogen, and double decomposition of heavy-metal salts ia aqueous solution or suspension with a soluble selenide salt, eg, Na2Se or (NH 2S [66455-76-3]. Atmospheric oxygen oxidizes the selenides more rapidly than the corresponding sulfides and more slowly than the teUurides. Selenides of the alkah, alkaline-earth metals, and lanthanum elements are water soluble and readily hydrolyzed. Heavy-metal selenides are iasoluble ia water. Polyselenides form when selenium reacts with alkah metals dissolved ia hquid ammonia. Metal (M) hydrogen selenides of the M HSe type are known. Some heavy-metal selenides show important and useful electric, photoelectric, photo-optical, and semiconductor properties. Ferroselenium and nickel selenide are made by sintering a mixture of selenium and metal powder. 

A double end point, acid—base titration can be used to determine both sodium hydrosulfide and sodium sulfide content. Standardized hydrochloric acid is the titrant thymolphthalein and bromophenol blue are the indicators. Other bases having ionization constants in the ranges of the indicators used interfere with the analysis. Sodium thiosulfate and sodium thiocarbonate interfere quantitatively with the accuracy of the results. Detailed procedures to analyze sodium sulfide, sodium hydro sulfide, and sodium tetrasulfide are available (1). 

Trialkyl- and triarylarsine sulfides have been prepared by several different methods. The reaction of sulfur with a tertiary arsine, with or without a solvent, gives the sulfides in almost quantitative yields. Another method involves the reaction of hydrogen sulfide with a tertiary arsine oxide, hydroxyhahde, or dihaloarsorane. X-ray diffraction studies of triphenylarsine sulfide [3937-40-4], C gH AsS, show the arsenic to be tetrahedral the arsenic—sulfur bond is a tme double bond (137). Triphenylarsine sulfide and trimethylarsine sulfide [38859-90-4], C H AsS, form a number of coordination compounds with salts of transition elements (138,139). Both trialkyl- and triarylarsine selenides have been reported. The trialkyl compounds have been prepared by refluxing trialkylarsines with selenium powder (140). The preparation of triphenylarsine selenide [65374-39-2], C gH AsSe, from dichlorotriphenylarsorane and hydrogen selenide has been reported (141), but other workers could not dupHcate this work (140). 

BaS hydrolyzes to Ba(OH)2 and barium hydrosulfide. Cooling of an aqueous BaS solution can precipitate the double salt barium hydroxide sulfide hydrate [42821-46-3J, Ba(OH)2 Ba(SH)2 -xH O. 

Hydrochloric acid digestion takes place at elevated temperatures and produces a solution of the mixed chlorides of cesium, aluminum, and other alkah metals separated from the sUiceous residue by filtration. The impure cesium chloride can be purified as cesium chloride double salts such as cesium antimony chloride [14590-08-0] 4CsCl SbCl, cesium iodine chloride [15605 2-2], CS2CI2I, or cesium hexachlorocerate [19153 4-7] Cs2[CeClg] (26). Such salts are recrystaUized and the purified double salts decomposed to cesium chloride by hydrolysis, or precipitated with hydrogen sulfide. Alternatively, solvent extraction of cesium chloride direct from the hydrochloric acid leach Hquor can be used. 

With pyridine, reaction takes place at the nitrogen rather than at a double bond, and an yUd [27032-01-5] is formed (57,58). Sulfides react similarly to give sulfOidenes and carbonyl cyanide (59). 

Various alkylating agents are used for the preparation of pyridazinyl alkyl sulfides. Methyl and ethyl iodides, dimethyl and diethyl sulfate, a-halo acids and esters, /3-halo acids and their derivatives, a-halo ketones, benzyl halides and substituted benzyl halides and other alkyl and heteroarylmethyl halides are most commonly used for this purpose. Another method is the addition of pyridazinethiones and pyridazinethiols to unsaturated compounds, such as 2,3(4//)-dihydropyran or 2,3(4//)-dihydrothiopyran, and to compounds with activated double bonds, such as acrylonitrile, acrylates and quinones. 

These effects can be attributed mainly to the inductive nature of the chlorine atoms, which reduces the electron density at position 4 and increases polarization of the 3,4-double bond. The dual reactivity of the chloropteridines has been further confirmed by the preparation of new adducts and substitution products. The addition reaction competes successfully, in a preparative sense, with the substitution reaction, if the latter is slowed down by a low temperature and a non-polar solvent. Compounds (12) and (13) react with dry ammonia in benzene at 5 °C to yield the 3,4-adducts (IS), which were shown by IR spectroscopy to contain little or none of the corresponding substitution product. The adducts decompose slowly in air and almost instantaneously in water or ethanol to give the original chloropteridine and ammonia. Certain other amines behave similarly, forming adducts which can be stored for a few days at -20 °C. Treatment of (12) and (13) in acetone with hydrogen sulfide or toluene-a-thiol gives adducts of the same type. 

Primary and secondary amines, double bonds, aldehydes, sulfides and certain aromatic and dihydroaroraatic systems are also oxidized by chromium VI reagents under standard hydroxyl oxidizing conditions. Amines are commonly protected by salt formation or by conversion to amides. Aldehydes and... 

Generally, isolated olefinic bonds will not escape attack by these reagents. However, in certain cases where the rate of hydroxyl oxidation is relatively fast, as with allylic alcohols, an isolated double bond will survive. Thepresence of other nucleophilic centers in the molecule, such as primary and secondary amines, sulfides, enol ethers and activated aromatic systems, will generate undesirable side reactions, but aldehydes, esters, ethers, ketals and acetals are generally stable under neutral or basic conditions. Halogenation of the product ketone can become but is not always a problem when base is not included in the reaction mixture. The generated acid can promote formation of an enol which in turn may compete favorably with the alcohol for the oxidant. 

Nucleophiles like alcohols [2, S], hydrogen sulfide [2], thiols [2,10], ammonia, amines, hydrazines, hydroxylamines [2 11, 12, 13, 14, 75], azides [2], other pseudohalides [2], phosphonates [2,16,17,18,19, 20], and phosphanes [2,19] add rapidly across the CO or CN double bond to yield stable adducts The phosphonate adduets undergo a subsequent aleohol—lester rearrangement [19, 20] (equation 2)... 

Reduction of 3,5,5-tris-aryl-2(5// )-furanones 115 (R, R, R = aryl) with dimethyl sulfide-borane led to the formation of the 2,5-dihydrofurans 116 in high yields. However, in the case of 3,4-diaryl-2(5//)-furanones 115 (R, R = aryl R = H or r = H R, R = aryl), the reduction led to a complicated mixture of products of which only the diarylfurans 117 could be characterized (Scheme 36) (88S68). It was concluded that the smooth conversion of the tris-aryl-2(5//)-furanones to the corresponding furan derivatives with the dimethylsulfide-borane complex in high yields could be due to the presence of bulky aryl substituents which prevent addition reaction across the double bond (88S68). 

Benzothiepins 2 can be synthesized by a double Knoevenagel condensation starting from phthalaldehydes I and diesters of thiodiglycolic acid, or diphenacyl sulfide.33-63 " 66 In principle, this is an extension of Hinsberg s synthesis of thiophenes (see Houben-Weyl, Vol. E6a, p 282) which employs 1,4-dialdehydes rather than 1,2-dicarbonyl compounds. 

The thermolabile, unsubstituted 3-benzothiepin (3) can be synthesized by a double Wittig reaction, in analogy to the Knoevenagel condensation (vide supra). This is achieved by condensation of phthalaldehyde with the bis(triphenylphosphonium) salt of bis(bromomethyl) sulfide in the presence of lithium methoxide as base at — 30"C.68... 

While there is clear evidence for complex formation between certain electron donor and electron acceptor monomers, the evidence for participation of such complexes in copolymerization is often less compelling. One of the most studied systems is S-.V1 Al I copolymerization/8 75 However, the models have been applied to many copolymerizations of donor-acceptor pairs. Acceptor monomers have substituents such as carboxy, anhydride, ester, amide, imide or nitrile on the double bond. Donor monomers have substituents such as alkyl, vinyl, aryl, ether, sulfide and silane. A partial list of donor and acceptor monomers is provided in Table 7.6.65.-... 

---