Succinate, bis

Dihydrazinenickel(II) succinate (Bis(hydrazine)[butanedioato(2—)]nickel) [45101-14-2] C4H12N4Ni04... 

Another three-dimensional supramolecular structure, 154, is found in bis-(triphenyltin) succinate-[bis(triphenyltin)succinate 2DMF], Ph3SnOOCCH2CH2-COOSnPh3 [DMF Ph3SnOOCCH2CH2COOSnPh3 DMF], all four tin atoms being five-coordinate trigonal bipyramidal [459]. 

N,N -Bisformyl-N,N -bis-(2,2,6,6-tetramethyl-4-piperidinyl)-hexa-methylenediamine (Uvinul 4050 H) Bis(2,2,6,6-tetramethyl-4-piperidyl)sebacate (Uvinul 4077 H) Bis(2,2,6,6-tetramethyl-4r-piperidyl)succinate Bis(l,2,2,6,6-pentamethyl-4-piperidyl)sebacate Bis(l-octyloxy-2,2,6,6-tetramethyl-4-piperidyl)sebacate Bis(l,2,2,6,6-pentamethyl-4-piperidyl) -butyl-3,5-di-ferf-butyl-4-hy-droxybenzyhnalonate... 

Docusate Calcium. Dioctyl calcium sulfosuccinate [128-49-4] (calcium salt of l,4-bis(2-ethylhexyl)ester butanedioic acid) (11) is a white amorphous soHd having the characteristic odor of octyl alcohol. It is very slightly soluble in water, and very soluble in alcohol, polyethylene glycol 400, and com oil. It may be prepared directly from dioctyl sodium sulfo succinate dissolved in 2-propanol, by reaction with a methan olic solution of calcium chloride. 

Docusate Sodium. Aerosol OT, Colace, and Doxinate are trade names of docusate sodium [577-11-7] (dioctyl sodium sulfo succinate, sodium salt of l,4-bis(2-etliylhexyl)estet butanedioic). This white, wax-like, plastic sohd, with a characteristic odor suggestive of octyl alcohol, is usually available in the form of pellets. One gram of the sodium salt slowly dissolves in about 70 mL water. Docusate sodium is freely soluble in alcohol and glycerol, very... 

A series of glycol bis(aUyl phthalates) and bis(aUyl succinates) and their properties are reported in reference 88. In homopolymerizations, cyclization increases in the order diaUyl aliphatic carboxylates < glycol bis(allyl succinates) < glycol bis(allyl phthalates). Copolymerizations with small amounts of DAP can give thermo set moldings of improved impact (89). 

Several procedures for making glutaric acid have been described in Organic Syntheses starting with trimethylene cyanide (28), methylene bis (malonic acid) (29), y-butyrolactone (30), and dihydropyran (31). Oxidation of cyclopentane with air at 140° and 2.7 MPa (400 psi) gives cyclopentanone and cyclopentanol, which when oxidized further with nitric acid at 65—75° gives mixtures of glutaric acid and succinic acid (32). 

Potential 2,5-dihydroxy compounds (185) exist in the dicarbonyl forms (186). Succinic anhydride (186 Z = O) on silylation is converted into 2,5-bis(trimethylsilyloxy)furan (187) the latter compound readily participates in Diels-Alder addition reactions (80TL3423). Reaction of thiosuccinic anhydride (186 Z = S) with the triphenylphosphorane Et02CH=PPh3 gives a product which exists in the aromatic form (188) (75LA1967). 

Preparation of l,2-bis(trimcthylsilyloxy)cyclobutene from diethyl succinate (Riihlmann condensation using Na and TMSC1), and of 2-hydroxycyclo-Ibutanone. 

Poller (498, 544) prepared a number of tributyl- and triphenyl-stan-nyl esters of sucrose hydrogenphthalate and succinate, and found that, as potential antifoulants, these were at least three times as effective against the marine alga, Enteromorpka, as bis(tributyltin) oxide, even though they contain almost one third the tin (see Table VIII). A new antifouling paint that also contains tributyltin compounds has recently been developed in Norway (545). 

FIGURE 8 Cumulative release of methylene blue (o), [1,4 - 14c] succinic acid (a), and polymer weight loss ( ) from polymer discs prepared from 3,9-bis(ethylidene-2,4,8,10-tetraoxaspiro[5,5Jundecane) and a 50 50 mole ratio of trans - cyclohexane dimethanol and 1,6-hexanediol at pH 7.4 and 37°C. Polymer contains 0.1 wt% [1,4 — [succinic anhydride and 0.3 wt% methylene blue. (From Ref. 

Bis(4-formylphenyl) succinate 2201 and octamethylene N,N -bis(trimethylsilyl) carbamate 2202 condense with aUyltrimethylsilane 82 in the presence of 10 mol% trityl perchlorate or TMSOTf 20 to give, after 24 h at 0°C in CH2CI2, the poly-... 

PPL catalyzed polycondensation of bis(2,2,2-trichloroethyl) alkanediaoates with glycols in anhydrous solvents of low polarity to produce the polyesters [34, 35]. In the polymerization of bis(2-chloroethyl) succinate and 1,4-butanediol using Pseudomonas fluorescens lipase (lipase PF) as catalyst, the polyester with low molecular weight was formed [36]. This may be due to the low enzymatic reactivity of the succinate substrate. 

Two 4-amino-3-mercaptol,2,4-triazole residues linked by a two-carbon bridge have been prepared by the reaction of thiocarbohydrazide with succinic acid 157a or malic acid 157b to give l,2-bis-(4-amino-5-mercapto-477-l,2,4-triazol-3-yl)ethan-l-ol 158a or l,2-bis-(4-amino-5-mercapto-477-l,2,4-triazol-3-yl)ethane 158b in yields of 56% and 60%, respectively (Equation 49) <2006PS(181)2361>. 

All maleimides were synthesized according to standard procedures.16 Maleic anhydride, dimethyl maleate, and diethyl fiimarate were purchased from Aldrich Chemical Co. and used as received. 1,4-Cyclohexanedimethanol divinyl ether (CHVE) and tetraethylene glycol divinyl ether (CHVE) were used as received from International Speciality Products. Bis(4-vinyloxybutyl) isophthalate (IPDBVE) and bis(vinyloxybutyl)succinate (SEGDVE) were obtained from Allied-Signal and used without further purification. All acrylates were used as received from either Aldrich Chemical Co. or Scientific Polymer Products. 2,2-Dimethoxy-2-phenylacetophenone (DMAP) was used as received from Ciba Specialty Chemicals. 

Fe 2S], a [4Fe-4S] and a [3Fe-4S] center. The enzyme catalyzes the reversible redox conversion of succinate to fumarate. Voltammetry of the enzyme on PGE electrodes in the presence of fumarate shows a catalytic wave for the reduction of fumarate to succinate (much more current than could be accounted for by the stoichiometric reduction of the protein active sites). Typical catalytic waves have a sigmoidal shape at a rotating disk electrode, but in the case of succinate dehydrogenase the catalytic wave shows a definite peak. This window of optimal potential for electrocatalysis seems to be a consequence of having multiple redox sites within the enzyme. Similar results were obtained with DMSO reductase, which contains a Mo-bis(pterin) active site and four [4Fe 4S] centers. 

Diesters and even triesters have been converted to bis- and tris(cyclopropanol)s, respectively. Dimethyl succinate gave the bis (cyclopropanol) derivative 17 in 80% yield, while triethyl trans-cyclopropanetricarboxylate (18) yields the tris (cyclopropanol) 19 (90%) (Scheme 11.4 selected examples in Table 11.2) [77,78], Higher homologous dicarboxylic acid diesters are likewise smoothly converted with ethylmagnesium bromide in the presence of Ti(OiPr)4 to provide the corresponding bis (cyclopropanol) s [71,78]. 

Bis(trimethylsiloxy)cyclobutene, a very useful building block, is easily prepared by the modified acyloin condensation of diethyl succinate with sodium in xylene in the presence of trimethylsilylehloride 62). 

---