Styrene ATRP radical polymerization

Thus, direct determination by EPR of coppa Il) species was reported by Matyjaszewski and coworkers [139] in the case of styrene ATRP. The polymerization proceeds by monomer addition to free radicals reversibly generated by an atom transfer process from dormant polymer chains with halide end-groups. In these reactions, a small amount of copper(II) species was used as a deactivator which moderates rates and keeps low polydispersity. An example of time-dependent EPR signals of copper species in the ATRP of styrene in toluene, initiated by 1-phenylethyl bromide (styrene/l-phenylethyl bromide/CuBr/ dNbipy=l(X)/l/l/2) at 110°C is shown in Figure 10.7 [139]. 

Polystyrene-Woc -polysulfone-/ /oc -polystyrene and poly(butyl acrylate)-Woc -polysulfone-/ /oc -poly(butyl acrylate) triblock copolymers were prepared using a macroinitiator.214 The hydroxyl-terminated polysulfone was allowed to react with 2-bromopropionyl bromide, an atomic transfer radical polymerization (ATRP) initiator, in the presence of pyridine. The modified macroinitiator could initiate die styrene polymerization under controlled conditions. 

Star polymers are a class of polymers with interesting rheological and physical properties. The tetra-functionalized adamantane cores (adamantyls) have been employed as initiators in the atom transfer radical polymerization (ATRP) method applied to styrene and various acrylate monomers (see Fig. 21). 

Block copolymers were synthesized by a combination of fipase-catalyzed polymerization and atom transfer radical polymerization (ATRE). " " At first, the polymerization of 10-hydroxydecanoic acid was carried out by using lipase CA as catalyst. The terminal hydroxy group was modified by the reaction with a-bromopropionyl bromide, followed by ATRP of styrene using CuCE2,2 -bipyridine as catalyst system to give the polyester-polystyrene block copolymer. Trichloromethyl-terminated poly(e-CL), which was synthesized by lipase CA-catalyzed polymerization with 2,2,2-trichloroethanol initiator, was used as initiator for ATRP of styrene. 

By contrast, much of the work performed using ruthenium-based catalysts has employed well-defined complexes. These have mostly been studied in the ATRP of MMA, and include complexes (158)-(165).400-405 Recent studies with (158) have shown the importance of amine additives which afford faster, more controlled polymerization.406 A fast polymerization has also been reported with a dimethylaminoindenyl analog of (161).407 The Grubbs-type metathesis initiator (165) polymerizes MMA without the need for an organic initiator, and may therefore be used to prepare block copolymers of MMA and 1,5-cyclooctadiene.405 Hydrogenation of this product yields PE-b-PMMA. N-heterocyclic carbene analogs of (164) have also been used to catalyze the free radical polymerization of both MMA and styrene.408... 

He also prepared a poly(styrene-g-styrene) polymer by this technique [114], The lack of crosslinking in these systems is indeed proof of the control achieved with this technique. An eight-arm star polystyrene has also been prepared starting from a calixarene derivative under ATRP conditions [115]. On the other hand, Sawamoto and his coworkers used multifunctional chloroacetate initiator sites and mediation with Ru2+ complexes for the living free-radical polymerization of star poly(methylmethacrylate) [116,117]. More recent work by Hedrick et al. [84] has demonstrated major progress in the use of dendritic initiators [98] in combination with ATRP and other methodologies to produce a variety of structure controlled, starlike poly(methylmethacrylate). 

The last decades have witnessed the emergence of new living Vcontrolled polymerizations based on radical chemistry [81, 82]. Two main approaches have been investigated the first involves mediation of the free radical process by stable nitroxyl radicals, such as TEMPO while the second relies upon a Kharash-type reaction mediated by metal complexes such as copper(I) bromide ligated with 2,2 -bipyridine. In the latter case, the polymerization is initiated by alkyl halides or arenesulfonyl halides. Nitroxide-based initiators are efficient for styrene and styrene derivatives, while the metal-mediated polymerization system, the so called ATRP (Atom Transfer Radical Polymerization) seems the most robust since it can be successfully applied to the living Vcontrolled polymerization of styrenes, acrylates, methacrylates, acrylonitrile, and isobutene. Significantly, both TEMPO and metal-mediated polymerization systems allow molec-... 

In this review, synthesis of block copolymer brushes will be Hmited to the grafting-from method. Hussemann and coworkers [35] were one of the first groups to report copolymer brushes. They prepared the brushes on siUcate substrates using surface-initiated TEMPO-mediated radical polymerization. However, the copolymer brushes were not diblock copolymer brushes in a strict definition. The first block was PS, while the second block was a 1 1 random copolymer of styrene/MMA. Another early report was that of Maty-jaszewski and coworkers [36] who reported the synthesis of poly(styrene-h-ferf-butyl acrylate) brushes by atom transfer radical polymerization (ATRP). 

We have repeated similar degrafting experiments for brush formation via ATRP. While there have been reports on degrafting using conventional radical polymerization [10,58], this discussion will be limited to brush formation by ATRP. In unpublished work [59], we immobilized an ATRP initiator, (1 l-(2-bromo-2-methyl)propionyloxy)undecyltrichlorosilane) on StOber silica and conducted a styrene polymerization. Degrafting of the PS brushes was conducted by etching of the silica cores with HE From TGA analysis of the immobilized initiator and the corresponding PS brush system, we determined that there are 4.8 initiator molecules/nm and / = 0.06. The initiator density corresponds well to the values of 2.4-5.0 reported by Patten and co-workers [56,57] for the immobilization of (2-(4-chloromethylphenyl)ethyl)dimethylethoxysilane on a similar support. 

Ruthenium(II)-NHC systems ean be used for atom transfer radical polymerization (ATRP). Generally, similar results as for the analogous phosphine complexes are obtained. For the ATRP of styrene and methyl methacrylate (MMA) [(NHC)2peBr2] was found to rival copper(I)-based systems and to yield poly (MMA) with low polydispersities. Polymerizations based on olefin metathesis that are catalyzed by ruthenium-NHC complexes are discussed separately vide supra). 

Apart from ATRP, the concept of dual initiation was also applied to other (controlled) polymerization techniques. Nitroxide-mediated living free radical polymerization (LFRP) is one example reported by van As et al. and has the advantage that no further metal catalyst is required [43], Employing initiator NMP-1, a PCL macroinitiator was obtained and subsequent polymerization of styrene produced a block copolymer (Scheme 4). With this system, it was for the first time possible to successfully conduct a one-pot chemoenzymatic cascade polymerization from a mixture containing NMP-1, CL, and styrene. Since the activation temperature of NMP is around 100 °C, no radical polymerization will occur at the reaction temperature of the enzymatic ROP. The two reactions could thus be thermally separated by first carrying out the enzymatic polymerization at low temperature and then raising the temperature to around 100 °C to initiate the NMP. Moreover, it was shown that this approach is compatible with the stereoselective polymerization of 4-MeCL for the synthesis of chiral block copolymers. 

The synthesis of mixed peroxides formed from /-butyl hydroperoxide and carbon-centred radicals has been studied. The reactions were strongly effected by solvents as well as catalytic amounts of Cun/Fem. The kinetic data suggest that the conditions for the Ingold-Fischer persistent radical effect are fulfilled in these cases.191 The use of Cu /Cu" redox couples in mediating living radical polymerization continues to be of interest. The kinetics of atom-transfer radical polymerization (ATRP) of styrene with CuBr and bipyridine have been investigated. The polymer reactions were found to be first order with respect to monomer, initiator and CuBr concentration, with the optimum CuBr Bipy ratio found to be 2 1.192 In related work using CuBr-A-pentyl-2-... 

Frechet and coworkers recently described how living free radical polymerization can be used to make dendrigrafts. Either 2,2,6,6-tetramethylpiperidine oxide (TEMPO) modified polymerization or atom transfer radical polymerization (ATRP) can be used [96] (see Scheme 10). The method requires two alternating steps. In each polymerization step a copolymer is formed that contains some benzyl chloride functionality introduced by copolymerization with a small amount of p-(4-chloromethylbenzyloxymethyl) styrene. This unit is transformed into a TEMPO derivative. The TEMPO derivative initiates the polymerization of the next generation monomer or comonomer mixture. Alternatively, the chloromethyl groups on the polymer initiate an ATRP polymerization in the presence of CulCl or CuICl-4,4T dipyridyl complex. This was shown to be the case for styrene and n-butylmethacrylate. SEC shows clearly the increase in molecu-... 

Louie and Grubbs prepared an iron-based catalyst for atom transfer radical polymerization (ATRP) [49]. By heating a solution of Iz Prim and FeX2 (X = Br, Cl), crystals of Fe(Iz Prim)2X2 were obtained. These complexes mediated the homogeneous ATRP of styrene and methyl methacrylate with... 

The controlled emulsion polymerization of styrene using nitroxide-mediated polymerization (NMP), reversible addition-fragmentation transfer polymerization (RAFT), stable free radical polymerization (SFR), and atom transfer radical polymerization (ATRP) methods is described. The chain transfer agent associated with each process was phenyl-t-butylnitrone, nitric oxide, dibenzyl trithiocarbonate, 1,1-diphenylethylene, and ethyl 2-bromo-isobutyrate, respectively. Polydispersities between 1.17 and 1.80 were observed. 

Controlled Polymerization of Styrene Using n-Butyl Acrylate and 1-Hexene [Atom Transfer Radical Polymerization ATRP]... 

---