Style tension

Though the processes of bud development, pollen transfer to the pollen plate, secondary pollen presentation, set-up of style tension and pollination by means of the explosive style movement are found in all Marantaceae, adult flowers vary in... 

Table 7-10 presents a temperature conversion table for various metals from one manufacturer for conventional pre-bulged, tension-loaded disks with pressure on concave side (not prescored) as an illustration of the effect of lower or elevated temperatures referenced to 72°F on the burst pressure of a stamped disk. For other types of disk designs and from other manufacturers, the specific data for the style disk must be used to make the appropriate temperature correction. 

This appears to mark the last of coastal kingdoms associated with Bataks either by name or fife-style. The ports were hereafter all Muslim and in varied degrees of tension with the people of the uplands, whom they labelled Batak as those who had resisted the Acehnese jihad. Thus Barros, writing in mid-century, could report that Sumatra ... 

The Rhenisch mission to the Toba Batak succeeded in part because as a German body it was conceptually separate from Dutch colonialism, and indeed preceded colonial control in the Toba Batak heartland. Between 1860 and 1900 the majority of Toba Bataks accepted Christianity, in a form which centred around the printed Batak versions of the Augsburg Confession and the Bible. Although there were areas of great tension between Batakness and Christianity, the second generation of Christians was able to conceive the uniform style of worship, belief and church governance developed by the Rhenisch mission as a part of the Batak identity, and the language used by the mission as a classic form of Batak expression. In 1927 the mission was reconstituted as a Batak church, the HKBP. 

Because the above MEH-PPV solutions were made from the same batch of polymer, the different surface tension values observed in Table 6.1 should be due to the different aggregation states (or packing) styles of the polymer chains, resulting from the different solvation effects. 

To complicate matters, the sickness of persons and the sickness of populations represent very different problems, for patients, physicians, and politicians. Private health measures that benefit the individual may help or harm the community. Public health measures that benefit the community may help or harm the individual. The potential conflict between private health and public health is an integral part of the tension between civil society and the state. In his paper Sick Individuals and Sick Populations, epidemiologist Geoffrey Rose notes that a preventive measure which brings much benefit to the population offers little to each participating individual. This has been the history of public health—of immunization, the wearing of seatbelts, and now the attempt to change various life-style characteristics. Of enormous potential importance to the population as a whole, these measures offer very little—particularly in the short term—to each individual. 

Surfactants and oils are also present in most mousse formulations. Surfactants function to lower the surface tension to help spread the polymer film over the hair surface and to support the foam character of the product. Mousses are added to wet hair. They are combed through without rinsing, to distribute the product through the hair. The hair is then styled and dried. Mousses can improve wet hair manageability by lowering combing forces. They also enhance body and style retention. 

What caused the change in the style of the FIFRA debate As usual in most major controversies, the dynamics of the periods of tension, or of positive attitudes, are hard to trace. In this case, as is often true, there was an external factor which drove the parties toward c< npromise, and in so doing motivated them... 

Siloxane surfactants are crucial ingredients in personal care products they are the components of shampoos and conditioners that improve the softness and silkiness of hair, and are also used in shaving foams, toothpastes, antiper-spirants, cosmetics, hair-styling gels and bath oils. These applications follow from a combination of properties, e.g. low surface tension, water-solubility or dispersion in water to give emulsions, and low toxicity. Some of these properties contrast sharply with those required by polysilox-anes used in, for example, greases, sealants and rubbers. Siloxane surfactants contain a permethylated backbone which incorporates polar substituents. For example, polyether groups are hydrophilic and allow the polymers to be used in aqueous media, a prerequisite for use in shampoos and hair conditioners. 

When the load on beam LI applied to 21.7 KN, concrete cracks begin to appear at the tension zone of the test beam. And the cracks developed with the increase of load. But the cracks are in control. The steel yield until the load increase to 132.6 KN. But the concrete crack is still relatively thin which is less than 0.1 mm. At this point, the midspan deflection is 14.51 mm. Continue to increase the load after steel yielded, the deformation of the test beam speed, cracks width become obvious. When the load applied to 165.6 KN. The N0.4 crack vertical in the middle of the beam achieved rapid development. Its width reached 0.2 mm and its deflection reached 19.72 mm. When the load applied to 169.8 KN, the crack become clear. The width of N0.4 crack come to 0.5 mm, the width of the cracks beyond the limit. And the cracks in the style of eight extension show on both sidesof the beam. We concluded that the artifacts began to breakdown. When the load applied to 174.8 KN, the concretes in the compressive zone were completely splited. the test beam reached the ultimate load, its deflection come to 31.19 mm. We concluded that the artifacts were completely destroyed. 

The setting-up of tension in the style of Marantaceae. Plant Biology, 10, 441-450. 

In most instances, the steep fault can be reactivated and normal fault-style movement can be induced regardless of the trend of the fault under such circumstances. Specifically, when a steep bedding fault located in the tension zone of the slope, the reactivated fault showed a normal fault-style movement and formed a back-facing scarp on the slope surface. While, when a steep antithetic fault... 

---