Standard potentials electrode reactions

In non-aqueous electrolytes, the different properties of the solvated metal ions lead to different equilibrium and standard potentials. For comparing standard potentials, electrode reactions should be defined as reference systems with similar values in different solvents. Koepp, Wendt, and Strehlow suggested ferrocene/ferrocinium and cobaltocene/ cobaltocenium redox systems. The redox systems are bis-pentadienyl complexes of Fe +/Fe + and Co /Co , respectively. Gritzner and Kuta recommended ferrocene/ferrocinium and bis(biphenyl)Cr(l)/bis(biphenyl)Cr(0). Salt bridges with conventional cells should be avoided. Similar to aqueous electrolytes a reference to the physical potential scale is possible. Similar considerations hold for ionic melts and molten and solid electrolytes. 

To determine the potential of a half-cell reaction when the reactants and products are not at unit activity, the Nemst equation is used. Consider again the general half-cell reaction given by Equation (26.13). When this reaction is combined with the standard hydrogen electrode reaction (Equation (26.20)), the overall cell reaction is... 

Noyes (62) has drawn attention to our inability to assign an absolute potential to the standard hydrogen electrode, Reaction 19, and thus to... 

Furthermore, we will follow the common practice of referring to the potential E as (the redox potential) when the half-reaction is written as a reduction reaction. The subscript H is used to emphasize that the potential only has meaning in reference to the standard hydrogen electrode reaction. Using this nomenclature, Eq. 7-10 is written as... 

The potential of the Na-Hg electrode was then measured in a separate cell containing the aqueous solution of sodium salt. The standard potential for reaction (44) thus obtained was —2.714 V [6,8,9] or —2.71324 V [14] at 25 C. The standard potentials for the reaction (44) in the temperature range of 5-40 C were also reported [14]. 

The standard potential of reaction (6), which takes place in acid solutions, is 1.23 V vs. standard hydrogen electrode (SHE). Reaction (7), in alkaline solutions, has a potential of 0.40 V vs. SHE. Both reactions are 1.23 V positive to the reversible potential of the hydrogen evolution reaction (HER) in the respective media. Therefore, the theoretical decomposition voltages of certain electrochemical processes can be reduced by 1.23 V if an oxygen-consuming cathode is substituted for the conventional hydrogen-evolving type. Examples of these processes [5] are ... 

Selected standard electrode potentials Electrode reaction f /V Electrode reaction f /V... 

Standard Hydrogen Electrode The standard hydrogen electrode (SHE) is rarely used for routine analytical work, but is important because it is the reference electrode used to establish standard-state potentials for other half-reactions. The SHE consists of a Pt electrode immersed in a solution in which the hydrogen ion activity is 1.00 and in which H2 gas is bubbled at a pressure of 1 atm (Figure 11.7). A conventional salt bridge connects the SHE to the indicator half-cell. The shorthand notation for the standard hydrogen electrode is... 

Other Coordination Complexes. Because carbonate and bicarbonate are commonly found under environmental conditions in water, and because carbonate complexes Pu readily in most oxidation states, Pu carbonato complexes have been studied extensively. The reduction potentials vs the standard hydrogen electrode of Pu(VI)/(V) shifts from 0.916 to 0.33 V and the Pu(IV)/(III) potential shifts from 1.48 to -0.50 V in 1 Tf carbonate. These shifts indicate strong carbonate complexation. Electrochemistry, reaction kinetics, and spectroscopy of plutonium carbonates in solution have been reviewed (113). The solubiUty of Pu(IV) in aqueous carbonate solutions has been measured, and the stabiUty constants of hydroxycarbonato complexes have been calculated (Fig. 6b) (90). 

Fig. 2. Standard potentials of battery (a) negative electrode and (b) positive electrode reactions (13). Potentials are given in volts.

The thermodynamics of electrochemical reactions can be understood by considering the standard electrode potential, the potential of a reaction under standard conditions of temperature and pressure where all reactants and products are at unit activity. Table 1 Hsts a variety of standard electrode potentials. The standard potential is expressed relative to the standard hydrogen reference electrode potential in units of volts. A given reaction tends to proceed in the anodic direction, ie, toward the oxidation reaction, if the potential of the reaction is positive with respect to the standard potential. Conversely, a movement of the potential in the negative direction away from the standard potential encourages a cathodic or reduction reaction. 

Electrode Potential (E) the difference in electrical potential between an electrode and the electrolyte with which it is in contact. It is best given with reference to the standard hydrogen electrode (S.H.E.), when it is equal in magnitude to the e.m.f. of a cell consisting of the electrode and the S.H.E. (with any liquid-junction potential eliminated). When in such a cell the electrode is the cathode, its electrode potential is positive when the electrode is the anode, its electrode potential is negative. When the species undergoing the reaction are in their standard states, E =, the stan-... 

Standard Electrode Potential (E ) the equilibrium potential of an electrode reaction when the components are ail in their standard states. 

The most widely used reference electrode, due to its ease of preparation and constancy of potential, is the calomel electrode. A calomel half-cell is one in which mercury and calomel [mercury(I) chloride] are covered with potassium chloride solution of definite concentration this may be 0.1 M, 1M, or saturated. These electrodes are referred to as the decimolar, the molar and the saturated calomel electrode (S.C.E.) and have the potentials, relative to the standard hydrogen electrode at 25 °C, of 0.3358,0.2824 and 0.2444 volt. Of these electrodes the S.C.E. is most commonly used, largely because of the suppressive effect of saturated potassium chloride solution on liquid junction potentials. However, this electrode suffers from the drawback that its potential varies rapidly with alteration in temperature owing to changes in the solubility of potassium chloride, and restoration of a stable potential may be slow owing to the disturbance of the calomel-potassium chloride equilibrium. The potentials of the decimolar and molar electrodes are less affected by change in temperature and are to be preferred in cases where accurate values of electrode potentials are required. The electrode reaction is... 

Here Ee is the standard potential of the reaction against the reference electrode used to measure the potential of the dropping electrode, and the potential E refers to the average value during the life of a mercury drop. Before the commencement of the polarographic wave only a small residual current flows, and the concentration of any electro-active substance must be the same at the electrode interface as in the bulk of the solution. As soon as the decomposition potential is exceeded, some of the reducible substance (oxidant) at the interface is reduced, and must be replenished from the body of the solution by means of diffusion. The reduction product (reductant) does not accumulate at the interface, but diffuses away from it into the solution or into the electrode material. If the applied potential is increased to a value at which all the oxidant reaching the interface is reduced, only the newly formed reductant will be present the current then flowing will be the diffusion current. The current / at any point... 

Electrical units 503, 519 Electrification due to wiping 77 Electro-analysis see Electrolysis and Electrogravimetry Electrochemical series 63 Electro-deposition completeness of, 507 Electrode potentials 60 change of during titration, 360 Nernst equation of, 60 reversible, 63 standard 60, (T) 62 Electrode reactions 505 Electrodeless discharge lamps 790 Electrodes antimony, 555 auxiliary, 538, 545 bimetallic, 575... 

Several significant electrode potentials of interest in aqueous batteries are listed in Table 2 these include the oxidation of carbon, and oxygen evolution/reduction reactions in acid and alkaline electrolytes. For example, for the oxidation of carbon in alkaline electrolyte, E° at 25 °C is -0.780 V vs. SHE or -0.682 V (vs. Hg/HgO reference electrode) in 0.1 molL IC0 2 at pH [14]. Based on the standard potentials for carbon in aqueous electrolytes, it is thermodynamically stable in water and other aqueous solutions at a pH less than about 13, provided no oxidizing agents are present. 

Standard potentials are also called standard electrode potentials. Because they are always written for reduction half-reactions, they are also sometimes called standard reduction potentials. 

The negative standard potential means that the Zn2+/Zn electrode is the anode in a cell with H+/H2 as the other electrode and, therefore, that the reverse of the cell reaction, specifically... 

STRATEGY Find the standard potentials of the two reduction half-reactions in Appendix 2B. The couple with the more positive potential will act as an oxidizing agent (and be the site of reduction). That couple will be the right-hand electrode in the cell diagram corresponding to the spontaneous cell reaction. To calculate the standard emf of the cell, subtract the standard potential of the oxidation half-reaction (the one with the less-positive standard potential) from that of the reduction half-reaction. To write the cell reaction, follow the procedure in Toolbox 12.2. 

A student was given a standard Fe(s) Fe2+(aq) half-cell and another half-cell containing an unknown metal M immersed in 1.00 M MNO,(aq). When these two half-cells were connected at 25°C, the complete cell functioned as a galvanic cell with E = +1.24 V. The reaction was allowed to continue overnight and the two electrodes were weighed. The iron electrode was found to be lighter and the unknown metal electrode was heavier. What is the standard potential of the unknown MT/M couple ... 

When the two electrodes are connected, current flows from M to X in the external circuit. When the electrode corresponding to half-reaction 1 is connected to the standard hydrogen electrode (SHE), current flows from M to SHE. (a) What are the signs of ° of the two half-reactions (b) What is the standard cell potential for the cell constructed from these two electrodes ... 

It should be kept in mind, that these rate constants are defined based on the volume concentrations of the reacting species. Another standard rate constant hP can be defined with regard to the rate of the reaction at the standard electrode potential of the electrode reaction. This rate constant refers consequently to standard activities instead of concentrations. 

Defining a reference value for the SHE makes it possible to determine E ° values of all other redox half-reactions. As an example. Figure 19-14 shows a cell in which a standard hydrogen electrode is connected to a copper electrode in contact with a 1.00 M solution of C U . Measurements on this cell show that the SHE is at higher electrical potential than the copper electrode, indicating that electrons flow from the SHE to the Cu... 

It was concluded from this and related works that suppression of the photodissolution of n-CdX anodes in aqueous systems by ions results primarily from specific adsorption of X at the electrode surface and concomitant shielding of the lattice ions from the solvent molecules, rather than from rapid annihilation of photogenerated holes. The prominent role of adsorbed species could be illustrated, by invoking thermodynamics, in the dramatic shift in CdX dissolution potentials for electrolytes containing sulfide ions. The standard potentials of the relevant reactions for CdS and CdSe, as well as of the sulfide oxidation, are compared as follows (vs. SCE) [68] ... 

The cathodic decomposition of Bi2S3 by electrons in the conduction band occurs at the standard potential of the 61283 electrode by the reaction... 

Nowadays, tables of standard electrode potentials are used instead of the electromotive series. They include electrode reactions not only of metals but also of other substances [Table 3.1 for detailed tables, see the books of Lewis and Rendall (1923) and Bard et al. (1985)]. 

The standard electrode potential of reaction (15.20) calculated thermodynamically is 1.229 V (SHE) at 25°C. For reachons (15.21) and (15.22), these values are 0.682 and 1.776 V, respechvely. The equihbrium potenhals of all these reactions have the same pH dependence as the potential of the reversible hydrogen electrode therefore, on the scale of potentials (against the RHE), these equilibrium potenhals are... 

The usual Tafel evaluation yielded a transfer coefficient a = 0.52 and a rate constant k of 4x 10 cm s at the standard potential of the MV /MV couple. This k value corresponds to a moderately fast electrochemical reaction. In this electrode-kinetic treatment the changes in the rate of electron transfer with pH were attributed only to the changes in the overpotential. A more exact treatment should also take into account the electrostatic effect on the rate of reaction which also changes with pH. 

---