Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stabihty

Inspection of the values for the structure elements and their contribution to the heats of formation again allows interpretation The B-terms correspond to the energies to break these bonds, and a sequence of three carbon atoms introduces stabihty into an alkane whereas the arrangement of three carbon atoms around a central carbon atom leads to the destabilization of an alkane. [Pg.324]

Acid derivatives are made directly from acids or by conversion from other acid derivatives depending on their stabihty. The most important are esters (RCOiEt), amides (RCO2NR2), anhydrides (RCOO COR) and add clilorides (RCOCI). Arrange these in an order of stabilily, the most reactive at the top of the list, the most stable at the bottom. [Pg.21]

Most chiral chromatographic separations are accompHshed using chromatographic stationary phases that incorporate a chiral selector. The chiral separation mechanisms are generally thought to involve the formation of transient diastereomeric complexes between the enantiomers and the stationary phase chiral ligand. Differences in the stabiHties of these complexes account for the differences in the retention observed for the two enantiomers. Often, the use of a... [Pg.61]

Rearranging the above expression yields impurity concentration as a function of relative intensity, = Ral where represents both sample concentration and any background effects. The stabiHty of the cahbration must be confirmed at least every two weeks by analysis of a known mixed impurity standard. [Pg.90]

PHOST is often prepared by polymerization of 4-acetoxystyrene followed by base-catalyzed hydrolysis (Fig. 29). The acetoxystyrene monomer s stabihty and polymerization kinetics allow production of PHOST of higher quaUty than is easily obtained by direct radical polymerization of HOST. The PHOST homopolymer product is then partially or fully derivatized with an acid-cleavable functionaUty to produce the final resist component. [Pg.129]

Providing coUoidal stabiHty to disperse phases in aqueous media, not achievable with traditional water-soluble polymers. [Pg.320]

Com oil s flavor, color, stabiHty, retained clarity at refrigerator temperatures, polyunsaturated fatty acid composition, and vitamin E content make it a premium vegetable oil. The major uses are frying or salad appHcations (50%) and margarine formulations (35%). [Pg.360]

Uses and Treatments of Hardwood Plywood. Most early appHcations of hardwood plywood were those where the hardwood plywood was better adapted to the use than soHd wood. One of the most important early uses was in curved or formed parts, an appHcation particularly suited to the use of veneers which could be molded into intricate shapes during the pressing and bonding process. Then, as furniture manufacturers realized the inherently superior stabiHty of plywood compared to soHd wood, lumber-core or plywood panels began to be used for most flat-panel constmctions in furniture. [Pg.382]

Traces of formaldehyde, present in neat end-capped polymer or produced by processing polymer under abusive conditions, detract from polymer stabihty. Commercial resins typically contain formaldehyde scavengers. Nitrogen compounds, especially amines and amides, epoxies, and polyhydroxy compounds, are particularly efficacious scavengers. [Pg.58]

Acryhc acid and esters are stabilized with minimum amounts of inhibitors consistent with stabihty and safety. The acryhc monomers must be stable and there should be no polymer formation for prolonged periods with normal storage and shipping (4,106). The monomethyl ether of hydroquinone (MEHQ) is frequentiy used as inhibitor and low inhibitor grades of the acrylate monomers are available for bulk handling. MEHQ at 10—15 ppm is generally... [Pg.156]

Acryhc polymers are fairly iasensitive to normal uv degradation siace the primary uv absorption of acryhcs occurs below the solar spectmm (59). The iacorporation of absorbers, such as i9-hydroxyben2ophenone [117-99-7] further improves the uv stabihty (59). Under normal use conditions acryhc polymers have superior resistance to degradation and show remarkable retention of their original properties. [Pg.164]

Techniques for evaluating processing stabiHty and mechanochemical effects include using a Brabender torque rheometer (29,30), injection mol ding (26,28), capillary rheometry (26,28), and measuring melt index as a function of residence time (26). [Pg.203]

Antioxidants have been shown to improve oxidative stabiHty substantially (36,37). The use of mbber-bound stabilizers to permit concentration of the additive in the mbber phase has been reported (38—40). The partitioning behavior of various conventional stabilizers between the mbber and thermoplastic phases in model ABS systems has been described and shown to correlate with solubiHty parameter values (41). Pigments can adversely affect oxidative stabiHty (32). Test methods for assessing thermal oxidative stabiHty include oxygen absorption (31,32,42), thermal analysis (43,44), oven aging (34,45,46), and chemiluminescence (47,48). [Pg.203]

The effects of a rather distinct deformed shell at = 152 were clearly seen as early as 1954 in the alpha-decay energies of isotopes of californium, einsteinium, and fermium. In fact, a number of authors have suggested that the entire transuranium region is stabilized by shell effects with an influence that increases markedly with atomic number. Thus the effects of shell substmcture lead to an increase in spontaneous fission half-Hves of up to about 15 orders of magnitude for the heavy transuranium elements, the heaviest of which would otherwise have half-Hves of the order of those for a compound nucleus (lO " s or less) and not of milliseconds or longer, as found experimentally. This gives hope for the synthesis and identification of several elements beyond the present heaviest (element 109) and suggest that the peninsula of nuclei with measurable half-Hves may extend up to the island of stabiHty at Z = 114 andA = 184. [Pg.227]

Thus it can be seen that elements in and near the island of stabiHty based on element 114 can be predicted to have chemical properties as foUows. Element 114 should be a homologue of lead, that is, should be eka-lead, and element 112 should be eka-mercury, element 110 should be eka-platinum, etc (26,27). If there is an island of stabiHty at element 126, this element and its neighbors should have chemical properties like those of the actinide and lanthanide elements (26). [Pg.227]

Transport and Transformation. Once emitted into the atmosphere, the fate of a particular poUutant depends upon the stabihty of the atmosphere, which determines the concentration of the species, the stabihty of the poUutant in the atmosphere, which determines the persistence of the substance. Transport depends upon the stabUity of the atmosphere which, in turn, depends upon the ventilation. The stabUity of a poUutant depends on the presence or absence of clouds, fog, or precipitation the poUutant s solubUity in water and reactivity with other atmospheric constituents (which may be a function of temperature) the concentrations of other atmospheric constituents the poUutant s stabUity in the presence of sunlight and the deposition velocity of the poUutant. [Pg.367]

Pure nitroglycerin is a stable Hquid at temperate conditions. It decomposes above 60°C to form nitric oxides which in turn catalyze further decomposition. Moisture increases the rate of decomposition under these conditions. Double- and multibase propellants containing nitroglycerin have substantially shorter stabiHty Hves at 65 and 80°C than do single-base propellants. The decomposition of nitroglycerin proceeds as... [Pg.12]

D. M. Coleman and R. N. Rogers, "Pentaerythritol Tetranitrate (PETN) StabiHty and CompatibiHty," in Proceedings of Conference on Compatibility of... [Pg.28]


See other pages where Stabihty is mentioned: [Pg.9]    [Pg.52]    [Pg.62]    [Pg.63]    [Pg.78]    [Pg.124]    [Pg.124]    [Pg.210]    [Pg.244]    [Pg.246]    [Pg.249]    [Pg.336]    [Pg.360]    [Pg.142]    [Pg.197]    [Pg.203]    [Pg.217]    [Pg.218]    [Pg.219]    [Pg.227]    [Pg.227]    [Pg.227]    [Pg.235]    [Pg.279]    [Pg.321]    [Pg.322]    [Pg.325]    [Pg.8]    [Pg.8]    [Pg.12]    [Pg.12]    [Pg.17]    [Pg.19]   
See also in sourсe #XX -- [ Pg.36 , Pg.58 , Pg.154 , Pg.169 , Pg.181 , Pg.208 , Pg.216 , Pg.239 , Pg.240 ]




SEARCH



Analyte stabihty

Catalyst stabihty

Charge stabihty

Colloid stabihty

Hydrolytic stabihty

Metabohc stabihty

Phase stabihty

Thermodynamics stabihty

© 2024 chempedia.info