Solid-phase metal analysis

TABLE 11.14. Data on the Multiple Regression Analysis Between" Phytoavailable Metal, Soil Solution Metal Concentration (Ms), and Solid-Phase Metal Fractions ... 

In order to one of the most effective separation and preconcentration procedure in trace metal analysis is solid phase extraction (SPE) of analyte. 

Vukjovic et al.199 recently proposed a simple, fast, sensitive, and low-cost procedure based on solid phase spectrophotometric (SPS) and multicomponent analysis by multiple linear regression (MA) to determine traces of heavy metals in pharmaceuticals. Other spectroscopic techniques employed for high-throughput pharmaceutical analysis include laser-induced breakdown spectroscopy (LIBS),200 201 fluorescence spectroscopy,202 204 diffusive reflectance spectroscopy,205 laser-based nephelometry,206 automated polarized light microscopy,207 and laser diffraction and image analysis.208... 

The search for suitable borides of alkali metals recently led to a new lithium boride with hexagonal Bs-octahedra framework unknown until now. Strong evidence for the existence of planar LiaB molecules in the wide channels of the framework is given by the structural analysis ( ). This compound points out another aspect involving reactions of solid phases namely, the possible release of small molecules, which are clathrate-like, locked in the structure and are therefore stabilized. 

Ion exchanger colorimetry has been used as a sensitive and rapid method for vanadium analysis by immobilization of 2[2-(3-5-dibromopyri-dyl)azo]-5-dimethylaminobenzoic acid onto an ion exchanger resin AG 1X2 [75]. Solid phase fluorimetry can be useful for the analysis of very dilute solutions in water analysis or trace metal determination thus a chelating 8-(benzene-sulfonamido)quinoline, immobilized on Amberlite XAD2 support, has been used for the spectrofluorimetric determination of Zn(II) and Cd(II) [76]. 

Cadmium in acidified aqueous solution may be analyzed at trace levels by various instrumental techniques such as flame and furnace atomic absorption, and ICP emission spectrophotometry. Cadmium in solid matrices is extracted into aqueous phase by digestion with nitric acid prior to analysis. A much lower detection level may be obtained by ICP-mass spectrometry. Other instrumental techniques to analyze this metal include neutron activation analysis and anodic stripping voltammetry. Cadmium also may be measured in aqueous matrices by colorimetry. Cadmium ions react with dithizone to form a pink-red color that can be extracted with chloroform. The absorbance of the solution is measured by a spectrophotometer and the concentration is determined from a standard calibration curve (APHA, AWWA and WEF. 1999. Standard Methods for the Examination of Water and Wastewater, 20th ed. Washington, DC American Public Health Association). The metal in the solid phase may be determined nondestructively by x-ray fluorescence or diffraction techniques. 

The participation of Cd(OH)2 in the deposition of CdS (and other metal chalcogenides) has been demonstrated or suggested on many occasions. Kitaev et al. presented a theoretical thermodynamic treatment of the Cd " /ammonia/ thiourea system to show when Cd(OH)2 should be present as a solid phase in the deposition solution [36]. A graphical representation of this analysis is shown in Eigure 3.1. This graph is based on two equilibria the solubility product of Cd(OH)2 and the stability constant of the ammonia (ammine) complex of Cd. Consider first the former ... 

In a method proposed by Booth et al. (141) for the determination of phylloquinone in various food types, extracted samples are subjected to silica solid-phase extraction followed, in the case of meat or milk samples, by further purification using reversed-phase solid-phase extraction or liquid-phase reduction extraction, respectively. The final test solution is analyzed by NARP-HPLC, and the fluorescent hydroquinone reduction products of phylloquinone and the internal standard are produced online using a postcolumn chemical reactor packed with zinc metal. 2, 3 -Dihydrophylloquinone, a synthetic analog of phylloquinone, is a suitable internal standard for the analysis of vegetable juice, whole milk, and spinach. Another synthetic analog, Ku23), is used for the analysis of bread and beef, because a contaminant in the test solution coelutes with dihydro-phylloquinone. 

There are two general approaches to sampling air, or vaporous emissions from stationary (stack) and mobile (automobile, truck, etc.) sources, for the laboratory determination of volatile analytes.1 Bulk vapor-phase samples can be taken in the field in various containers and transported to a remote or field laboratory for analysis. Containers used for bulk vapor-phase samples include flexible polyvinyl fluoride (Tedlar ) bags, evacuated glass or metal reservoirs, and thermally insulated cryogenic collection vessels. Alternatively, the volatile analytes can be separated from the main components of air in the field and just the analytes and their collection devices transported to the laboratory. The principal techniques used to separate volatile analytes from air in the field are cryogenic traps, impingers, and solid-phase adsorbents. 

Photoelectron spectroscopy of valence and core electrons in solids has been useful in the study of the surface properties of transition metals and other solid-phase materials. When photoelectron spectroscopy is performed on a solid sample, an additional step that must be considered is the escape of the resultant photoelectron from the bulk. The analysis can only be performed as deep as the electrons can escape from the bulk and then be detected. The escape depth is dependent upon the inelastic mean free path of the electrons, determined by electron-electron and electron-phonon collisions, which varies with photoelectron kinetic energy. The depth that can be probed is on the order of about 5-50 A, which makes this spectroscopy actually a surface-sensitive technique rather than a probe of the bulk properties of a material. Because photoelectron spectroscopy only probes such a thin layer, analysis of bulk materials, absorbed molecules, or thin films must be performed in ultrahigh vacuum (<10 torr) to prevent interference from contaminants that may adhere to the surface. 

---