Software training

Costs of hardware, software, training, and data input may be hidden. 

Assessing the resources available for method development should also be done before beginning a project. The resources available include not only HPLCs, detectors, and columns, but also tools for sample preparation, data capture and analysis software, trained analysts, and especially samples representative of the ultimate analyte matrix. Also, it should be considered whether a fast, secondary method of analysis can be used to optimize sample preparation steps. Often, a simple colorimetric or fluorimetric assay, without separation, can be used for this purpose. A preliminary estimate of the required assay throughput will help to guide selection of methods. 

The QQ test script may be written by either the information technologist or the pharmacometrician. The ideal situation is for this to be a collaborative effort. Qne highly positive result of such a collaboration is that the QQ test can turn into the best software training experience that both individuals will have for the particular software involved. The need to actually read the vendor s user manual in order to generate meaningful test scripts can lead to an unanticipated benefit of identifying software capabilities that were previously unknown. 

The Level 3 initiative relates to support that Microsoft provides to its community in terms of access to technology, training, and support in 115 countries including Costa Rica, where Microsoft officials (R Leiva, personal communication, August 14, 2006) suggested that beneficiaries have included 3.2 million students. Microsoft achieved this by offering hardware, software, training,... 

Ownership Meetings Observer Course Development Observer Course Review Computer Software Training Observer Training Kickoff Meetings... 

CCW Research is an information center under China Computer World network (CCW www.ccw.com.cn/). CCW is founded by China Computer World Publishing and Services Co. In brief, CCW publishes and sells information about hardware, software, training, services. 

For observers, evaluation from the point of view of software and man-machine interface was good. Less than two hours were necessary for training. 

For several years, the French Atomic Energy Commission (CEA) has developed modelling tools for ultrasonic NDT configurations. Implemented within the CIVA software for multiple technique NDT data acquisition and processing [1,2], these models are not only devoted to laboratory uses but also dedicated to ultrasonic operators without special training in simulation techniques. This approach has led us to develop approximate models carrying out the compromise between as accurate as possible quantitative predictions and simplicity, speed and intensive use in an industrial context. 

PG workstations have become powerful, are simpler to use, and are generally ubiquitous within both laboratory and office environments. Using Wiadows-based software now widely available on instmment data stations as a basis for the LIMS will reduce the training costs and capital requirements when implementing a LIMS. 

Software In some programmable electronic systems (PES), errors are much easier to detect and correct than in others. Using the term software, in the wider sense, to cover all procedures, as distinct from hardware or equipment, some software is much friendlier than others. Training and instructions are obvious examples. As another example, if many types of gaskets or nuts and bolts are stocked, sooner or later the wrong type will be installed. It is better, and cheaper in the long run, to keep the number of types stocked to a minimum, even though more expensive types than are strictly necessaiy are used for some applications. 

The GHH Borsig Turbolog DSP control system used for controlling the machine train is designed to enable dynamic system simulation using the control system hardware and software. Tliis offers two major benefits ... 

Section 1. Provides a checklist for evaluating the computer hardware (equipment) and additional software (programs) required to operate the system. The flexibility and ease of use of the system and the availability of training and other types of vendor support are also addressed. 

Software containing MSDS information in OSHA fornut. Stores and prints MSDSs assists with training of employees. 

Subcontractor may be used in support zone or nonhazardous site activities. Eor limited activities at a hazardous waste site, the scope of work must be reviewed with the health and safety professional before work is started (examples landscape service, electricians, software development, training, etc.). The subcontractor must meet the following minimum requirements ... 

The modular design integrates, as far as possible, existing software from member states, to permit the free distribution of the package. Version 1.0 of PSAPACK was used in a IAEA international training course on PSA in safety decisions (1988). Since then, PSAPACK evolved in response to users requirements, and has been widely distributed. 

Cost If simulation software is in place and trained staff available, computation is considered faster and less expensive than measurement. 

Molecular modeling is a major new learning activity, and there are substantial obstacles that must be overcome before it can be used to best effect. Training is required so that teachers can decide what aspects of modeling will prove most useful, and students can make most effective use of their time. Funds need to be raised for the purchase of computer hardware and software. 

Most microprocessor-based vibration analyzers are capable of directly acquiring process variables and other inputs. The software and firmware provided with these systems generally support pre-programmed routes that include almost any direct or manual data input. These routes should include all data required to effectively analyze the operating condition of each machine-train and its process system. 

Accuracy Decisions on machine-train or plant system condition will be made based on the data acquired and reported by the predictive maintenance system. It must be accurate and repeatable. Errors can be input by the microprocessor and software as well as the operators. The accuracy of commercially available predictive maintenance system varies. While most will provide at least minimum acceptable accuracy, some are well below the acceptable level. 

Many of the predictive systems manufacturers are strictly hardware and software oriented. Therefore, they offer minimal training and no application training or technical support. Few plants can achieve minimum benefits from predictive maintenance without training and some degree of technical support. It is therefore imperative that the selected system or system vendors provide a comprehensive support package that includes both training and technical support. 

---