Sodium carbonate/hydroxide

Industrial Production and Uses of Sodium Carbonate, Hydroxide and Sulfate ... 

The solubility of each chloride is depressed in the presence of another salt with a like ion—for instance, the solubility of sodium chloride is depressed by increasing proportions of ammonium or potassium chlorides, or by sodium carbonate, hydroxide, or nitrate. Similar results obtain with potassium chloride, in the presence of... 

Dihydroxyaluminum Sodium Carbonate. [Carbon-aloil — )-G dihydroxyalvminum monosodium salt,-aluminum sodium carbonate hydroxide Kompensan Minicid. CHjAl-NaOs mol wt 144.00. C 8,34%, H 1.40%, Al 18.74%, Na 15.97%, O 55.55%. (H0)2AJ0C02Na. Prepd by the reac. tion between an aluminum alkoxide and NaHCOj in water Grote, U.S. pat. 2,783,179 (1957 to Chattanooga Medicine). 

USE Natural salt is the source of chlorine and of sodium as well as of all, or practically al], their compds, e.g., hydrochloric acid, chlorates, sodium carbonate, hydroxide, etc. for preserving foods manuf soap, dyes—to salt them out in freezing mixtures for dyeing and printing fabrics, glazing pottery, curing hides metallurgy of tin and other metals. 

Heavy metals often can be removed effectively by chemical precipitation in the form of carbonates, hydroxides, or sulfides. Sodium carbonate, sodium bisulfite, sodium hydroxide, and calcium oxide are all used as precipitation agents. The solids precipitate as a floe containing a large amount of water in the structure. The precipitated solids need to be separated by thickening or filtration and recycled if possible. If recycling is not possible, then the solids are usually disposed of to a landfill. 

On standing, gelatinous aluminium hydroxide, which may initially have even more water occluded than indicated above, is converted into a form insoluble in both acids and alkalis, which is probably a hydrated form of the oxide AI2O3. Both forms, however, have strong adsorptive power and will adsorb dyes, a property long used by the textile trade to dye rayon. The cloth is first impregnated with an aluminium salt (for example sulphate or acetate) when addition of a little alkali, such as sodium carbonate, causes aluminium hydroxide to deposit in the pores of the material. The presence of this aluminium hydroxide in the cloth helps the dye to bite by ad sorbing it—hence the name mordant (Latin mordere = to bite) dye process. 

Required Cyclohexanone, 20 g. hydroxylamine hydrochloride, 17 g. anhydrous sodium carbonate, 13 g. concentrated sulphuric acid, 50 ml. 25% aqueous potassium hydroxide solution, approx. 200 ml. chloroform, 120 ml. 

This type of extraction depends upon the use of a reagent which reacts chemically with the compound to be extracted, and is generally employed either to remove small amounts of impurities in an organic compound or to separate the components of a mixture. Examples of such reagents include dilute (5 per cent.) aqueous sodium or potassium hydroxide solution, 5 or 10 per cent, sodium carbonate solution, saturated sodium bicarbonate solution (ca. 5 per cent.), dilute hydrochloric or sulphuric acid, and concentrated sulphuric acid. 

Dilute sodium hydroxide solution (and also sodium carbonate solution and sodium bicarbonate solution) can be employed for the removal of an organic acid from its solution in an organic solvent, or for the removal of acidic impurities present in a water-insoluble solid or liquid. The extraction is based upon the fact that the sodium salt of the acid is soluble in water or in dilute alkali, but is insoluble in the organic solvent. Similarly, a sparingly soluble phenol, e.g., p-naphthol, CioH,.OH, may be removed from its solution in an organic solvent by treatment with sodium hydroxide solution. 

Polyhydric alcohols are compounds containing two or more hydroxyl groups in the molecule. The two most important are ethylene glycol HOCHjCHjOH (a dihydric alcohol) and glycerol HOCHjCH(OH)CH. OH (a trihydric alcohol). Ethylene glycol may be obtained by the hydrolysis of ethylene dibromide or ethylene dichloride with dilute aqueous sodium hydroxide or sodium carbonate solution ... 

Conduct the preparation in the fume cupboard. Dissolve 250 g. of redistilled chloroacetic acid (Section 111,125) in 350 ml. of water contained in a 2 -5 litre round-bottomed flask. Warm the solution to about 50°, neutralise it by the cautious addition of 145 g. of anhydrous sodium carbonate in small portions cool the resulting solution to the laboratory temperature. Dissolve 150 g. of sodium cyanide powder (97-98 per cent. NaCN) in 375 ml. of water at 50-55°, cool to room temperature and add it to the sodium chloroacetate solution mix the solutions rapidly and cool in running water to prevent an appreciable rise in temperature. When all the sodium cyanide solution has been introduced, allow the temperature to rise when it reaches 95°, add 100 ml. of ice water and repeat the addition, if necessary, until the temperature no longer rises (1). Heat the solution on a water bath for an hour in order to complete the reaction. Cool the solution again to room temperature and slowly dis solve 120 g. of solid sodium hydroxide in it. Heat the solution on a water bath for 4 hours. Evolution of ammonia commences at 60-70° and becomes more vigorous as the temperature rises (2). Slowly add a solution of 300 g. of anhydrous calcium chloride in 900 ml. of water at 40° to the hot sodium malonate solution mix the solutions well after each addition. Allow the mixture to stand for 24 hours in order to convert the initial cheese-Uke precipitate of calcium malonate into a coarsely crystalline form. Decant the supernatant solution and wash the solid by decantation four times with 250 ml. portions of cold water. Filter at the pump. 

The hydrochloride may not separate with other dialkylanilines. Add a slight excess of sodium carbonate or sodium hydroxide to the solution, extract the free base with other, etc. 

To a mixture of 10 g. of the compound and 3-5 ml. of 33 per cent, sodium hydroxide solution in a test-tube, add 2-5 ml. of 50 per cent, chloroacetic acid solution. If necessary, add a little water to dissolve the sodium salt of the phenol. Stopper the test-tube loosely and heat on agently-boiling water bath for an hour. After cooling, dilute with 10 ml. of water, acidify to Congo red with dilute hydrochloric acid, and extract with 30 ml. of ether. Wash the ethereal extract with 10 ml, of water, and extract the aryloxyacetic acid b shaking with 25 ml. of 5 per cent, sodium carbonate solution. Acidify the sodium carbonate extract (to Congo red) with dilute hydrochloric acid, collect the aryloxyacetic acid which separates, and recrystallise it from hot water. 

Hydrolysis may be effected with 10-20 per cent, sodium hydroxide solution (see p-Tolunitrile and Benzonitrile in Section IV,66) or with 10 per cent, methyl alcoholic sodium hydroxide. For diflScult cases, e.g., a.-Naphthoniirile (Section IV,163), a mixture of 50 per cent, sulphuric acid and glacial acetic acid may be used. In alkahne hydrolysis the boiling is continued until no more ammonia is evolved. In acid hydro-lysis 2-3 hours boiling is usually sufficient the reaction product is poured into water, and the organic acid is separated from any unchanged nitrile or from amide by means of sodium carbonate solution. The resulting acid is identified as detailed in Section IV,175. 

Methyl p-toluenesulphonate. This, and other alkyl esters, may be prepared in a somewhat similar manner to the n-butyl ester with good results. Use 500 g. (632 ml.) of methyl alcohol contained in a 1 litre three-necked or bolt-head flask. Add 500 g. of powdered pure p-toluene-sulphonyl chloride with mechanical stirring. Add from a separatory funnel 420 g. of 25 per cent, sodium hydroxide solution drop by drop maintain the temperature of the mixture at 23-27°. When all the alkali has been introduced, test the mixture with litmus if it is not alkaline, add more alkali until the mixture is neutral. Allow to stand for several hours the lower layer is the eater and the upper one consists of alcohol. Separate the ester, wash it with water, then with 4 per cent, sodium carbonate solution and finally with water. Dry over a little anhydrous magnesium sulphate, and distil under reduced pressure. Collect the methyl p-toluenesulphonate at 161°/10 mm. this solidifies on cooling and melts at 28°. The yield is 440 g. 

Preparation of palladium - calcium carbonate catalyst. Prepare 60 g. of precipitated calcium carbonate by mixing hot solutions of the appropriate quantities of A.R. calcium chloride and A.R. sodium carbonate. Suspend the calcium carbonate in water and add a solution containing 1 g. of palladium chloride. Warm the suspension until all the palladium is precipitated as the hydroxide upon the calcium carbonate, i.e., until the supernatant liquid is colourless. Wash several times with... 

Anion-exchange resins contain a basic radical, such as —NH and =NH, and are prepared by the condensation of formaldehj de with amines such as m-phenylenediainine and urea. These resins can absorb acids by the formation of salts, —NH3CI and =NHjCl, and are regenerated by treatment with sodium hydroxide or sodium carbonate. 

After the 2 hours is up, add the Sodium Hydroxide solution quickly with stirring. The solution should immediately turn a chalky, milk white. That s because a lot of Sodium Carbonate just got generated. You no longer need be concerned over it s temperature, so you can leave the solution in this state overnight if perhaps the hours have passed by foo quickly and you ve suddenly realized it s 2 00am. 

Sodium Chloroacetate Sodium chloroacetate [3926-62-3] mol wt 116.5, C2H2C102Na, is produced by reaction of chloroacetic acid with sodium hydroxide or sodium carbonate. In many appHcations chloroacetic acid or the sodium salt can be used interchangeably. As an industrial intermediate, sodium chloroacetate may be purchased or formed in situ from free acid. The sodium salt is quite stable in dry soHd form, but is hydrolyzed to glycoHc acid in aqueous solutions. The hydrolysis rate is a function of pH and temperature (29). 

---