Silver chloride methyl ethyl acetate

Note Highly polar solvent sweet, ethereal odor soluble in water flammable, burns with a luminous flame highly toxic by ingestion, inhalation and skin absorption miscible with water, methanol, methyl acetate, ethyl acetate, acetone, ethers, acetamide solutions, chloroform, carbon tetrachloride, ethylene chloride, and many unsaturated hydrocarbons immiscible with many saturated hydrocarbons (petroleum fractions) dissolves some inorganic salts such as silver nitrate, lithium nitrate, magnesium bromide incompatible with strong oxidants hydrolyzes in the presence of aqueous bases and strong aqueous acids. Synonyms methyl cyanide, acetic acid nitrile, cyanomethane, ethylnitrile. 

The chloride (62) thus obtained was resistant to subsequent hydrolysis to the alcohol (47). Therefore, (62) was quantitatively converted into (64) by treatment with sodium iodide in ethyl acetate. For replacement of the iodine in (64) with a hydroxy group, various methods were investigated. These included use of silver perchlorate in aqueous acetone, treatment with silver nitrate or a combination of sodium nitrate and methyl p-toluenesulfonate followed by reduction of the allylic nitrate intermediate with zinc and acetic acid, and application of the Evans method involving sulfoxide rearrangement [29]. A conversion method... 

Phenolic acids. Table 11 lists the Rf values for a number of phenolic acids and certain of their relatives on silica gel, silanized silica gel, cellulose, and polyamide layers. Silica gel (Silica Rapid Platten Woelm F-254) was used with solvents I [dichloromethane-toluene-formic acid (50 40 10)] and II [dichloromethane-acetic acid-water (100 50 50, lower phase)], followed by UV examination of the plates and subsequent spraying with 1 % methanolic ferric chloride. HPTLC precoated plates with silica gel 60 F-254, RP-8, and Wang polyamide were used with solvents 111 [benzene-ethyl acetate-formic acid (40 10 5)], IV [ethanol-water (55 45)], and IX [benzene-ethyl methyl ketone-methanol (60 26 14)], respectively. The upper part of Table 11 lists the Revalues of hydroxybenzoic acids and the lower part those for hydroxycinnamic acids. For columns V, VI, VII, and VIII, the solvents used were 2% formic acid (V), 20% potassium chloride solution (VI), isopropanol- ammonium hydroxide-water (8 1 1) (VII), and 10% acetic acid (VIII). For each layer the relative trends of the Revalues follow the polarity of the compounds listed. Table 12 gives the Revalues for certain phenolic acids on silver oxide-impregnated silica gel G by two-dimensional development on cellulose (107). 

When it is not possible to employ potassium chloride solution, e.g., if one of the junction solutions contains a soluble silver, mercurous or thallous salt, satisfactory results can be obtained with a salt bridge containing a saturated solution of ammonium nitrate the use of solutions of sodium nitrate and of lithium acetate has also been suggested. For non-aqueous solutions, sodium iodide in methyl alcohol and potassium thiocyanate in ethyl alcohol have been employed. 

ALKYLATION Benzyltiiethylammonium chloride. n-Butyl mercaptan. Dialkylcar-bonium fluoroborates. Diethoxycarboni-um fluoroborate. Dimethylcopperlithium. Ethyl vinyl ether. Dimethylformamidc dimethyl acetal. Dimethyl sulflde. Dimeth-ylsulfonium methylide. Ethyl chlorofor-mate. Hexamethylphosphoric tiiamide. Lithium diisopropylamide. Lithium N-iso-propylcyclohexylamide. O-Methyldiben-zofuranium fluoroborate. Methyl fluoro-sulfonatc. Naththalene-Sodium. Palladi-um(II) chloride. 1,2,2,6,6-PentamelhyI-pipetidine. Potassium hydroxide. Silver oxide. Sodium bis-2-mcthoxyethoxyaIu-minum hydride. Sodium hydride. Thai-lous ethoxide. 

ABSOLUTE ALCOHOL or ABSOLUTE ETHANOL (64-17-5) Forms explosive mixture with air (flash point 55°F/13°C). Reacts, possibly violently, with strong oxidizers, bases, acetic anhydride, acetyl bromide, acetyl chloride, aliphatic amines, bromine pentafluoride, calcium oxide, cesium oxide, chloryl perchlorate, disulfuryl difluoride, ethylene glycol methyl ether. Iodine heptafluoride, isocyanates, nitrosyl perchlorate, perchlorates, platinum, potassium- er -butoxide, potassium, potassium oxide, potassium peroxide, phosphonis(III) oxide, silver nitrate, silver oxide, sulfuric acid, oleum, sodium, sodium hydrazide, sodium peroxide, sulfmyl cyanamide, tetrachlorosilane, i-triazine-2,4,6-triol, triethoxydialuminum tribromide, triethylaluminum, uranium fluoride, xenon tetrafluoride. Mixture with mercury nitrate(II) forms explosive mercury fulminate. Forms explosive complexes with perchlorates, magnesium perchlorate (forms ethyl perchlorate), silver perchlorate. Flow or agitation of substance may generate electrostatic charges due to low conductivity. 

---