Silanes APTES

Principally, the main differentiation for uniform monolayers made by silanization is whether they are formed from long-chain or short-chain organosUanes. For long-chain silanes, a number of alkyltrichlorosilanes is described in the literature (for example l-thioacetato-16-(trichlorosilyl)-hexadekane [19]), and for silanization with short-chain compounds several different alkyltrialkoxysilanes are used (for example 3-aminopropyltriethoxy-silane, APTES). 

NS suspended in ddH20 at a concentration of 40x 10 particles/mL were vortexed and ultrasonicated for 5 min before being placed in 3 pL spots on aminopropyl triethoxy silanized (APTES) slides and left until dry. APTES slides are commercially available and can be purchased from (for example) Schott or Coming. The slides were then washed five times in excess water in order to remove any free particles. Particles typically formed layered aggregates, which could be visualized using atomic force microscopy (AFM). 

Controlled-Pore Glass. Silanol groups on the glass surface provide sites at which silanization may be performed. Silanization may be effectively performed with a 5% aqueous solution of aminopropyltri(ethoxy)silane (APTES),1... 

Untreated silica capillaries show a cathodic drift of buffer, that is a flow of buffer from the anodic to the cathodic end, allowing an on-column detector to be placed near the cathodic end of the capillary. At which end of the capillary should a detector be placed if the inner silanol surface of the capillary has been covalently modified with aminopropyltri(ethoxy) silane, APTES (cf. Chapter 4) ... 

In another work, silica nano helices have been prepared from the organic self-assemblies of -tartrate amphiphiles by sol-gel transcription. Then this chiral nanostructures were functionalized with (3-aminopropyl)-trietho)y-silane (APTES) or (3-mercaptopropyl)triethoxysilane (MPTES) and decorated with gold nanoparticles of various diameters (1-15 nm) resulting in nanohelix hybrid structures (Fig. 25). ° It was found that the surface plasmon resonance intensity of these nanohybrid systems increased with gold particle size. Gold nanoparticles of 10-14 nm diameter have clearly showed a surface enhanced effect on Raman spectroscopy. This sj tem is a unique example of the 3D hybrid network that could be used as ultrasensitive chemical and biological sensors for detection of molecules of interest in liquids by accumulation under flow. 

FIG. 4 Narrow-scan XPS spectra for the elements of interest on y-Fe203 with silanized APTES (a) from water and (b) from toluene, in comparison with (c) untreated y-Fc203 particles. 

In this study, mesoporous silica, SBA-15, was synftiesized using a sol-gel method. Three different types of metal catalysts were prepared via the silylation and grafting techniques, hr particular, Ni-L-SB A was prepared by the impregnation with UX-984 after silanization by 3-aminopropyltriethoxy silane (APTES, Aldrich Giemical Co.) of the SBA-15 and Ni-L-CS was prepared using a conventional silica as a siqrport. Ni-E-SBA was synthesized by the... 

FeCl3 6H20 FeS04 7H20 3-aminopropyltrimethoxy silane (APTES) and Polyethylene glycol diacid (HOOC-PEG-COOH) 40-60 Feng et al., 2008... 

Infrared analysis of unsubstituted magnetite nanoparticles showed the stretches from Fe-O at 560 cm . Once amino propyl trimethyl silane (APTS) was attached to the surface, additionally C—H stretches at (2949, 2866 cm ) and Si—O stretches at 1015 cm were found. In the final G3-PAMAM MNP N-H and... 

The basic idea for these synthesis routes (for details see ref Mennig, 1994a, 1994b, 1994c, 1995, 1997b Spanhel, 1992 Burkhart, 1994 Catalano, 1994 Schmitt, 1997) was to use functionalized silanes (aminosilanes Uke 3-ammo propyl triethoxy silane (APTS), A-(2-amino ethyl)-3-amino propyl trimethoxy silane (DIAMO), trimethoxy silyl propyl diethylen triamin (TRIAMO) or thiosilanes like 3-mercapto propyl trimethoxy silane... 

Phase behavior, self-assembly, and rheology properties of 3-amino-propyltriethojq silane (APTES) and nonionic surfactant C12E04 in water were studied. The self-assembled structures were detected by means of small angle X-ray scattering (SAXS), cryo-transmission electron microscopy (ctyo-TEM), freeze-fracture TEM (FF-TEM), and H NMR measurements and the properties of self-assembled mixtures were obtained by rheology measurements. With a variation of the compn., different self-assembled structures were obtained. ... 

Recently, a modified drop casting method for FET fabrication was reported. In this method, the Si/Si02 wafer was modified with a monolayer of aminosilane, a chemical known for its affinity to the CNTs, by treating with aminopropyltriethoxy silane (APTES) followed by assembly of SWNTs from a dilute solution of SWNTs. This method resulted in uniformly distributed high-density SWNT network when compared to surface without APTES (Eig. 14.2d). The process enables a wafer-level fabrication that can be used on both pre- and post-patterned electrodes and possesses flexibility with regard to controlling SWNT density in the network by manipulating SWNT concentration and deposition time. 

---