Trimethoxy silane

ALKANOLAMNES - ALKANOLAMINES FROM OLEFIN OXIDES AND AL ONIA] (Vol 2) (3-(2-Aminoethyl)aminopropyl)trimethoxy silane... 

The observation of the spectrum for styrene polymerized on the surface of silane-treated silica and of the difference spectrum of polystyrene adsorbed on the surface of silica have revealed that there are absorption bands of atactic polystyrene at 1602, 1493, 1453, 756, and 698 cm. The absorption bands at 1411 and 1010 cm are related to vinyl trimethoxy silane, and C of the difference spectrum is below the base line. This indicates that the vinyl groups of silane react with styrene to form a copolymer. 

Figure 17 Raman spectra of a glass fiber/matrix interfaces. (A) styrene monomer (B) untreated E-glass fiber coated with polystyrene, (C) E-glass fiber treated with y-methacryloxy propyl trimethoxy silane.

Zhong X, Yuan R, Chai Y, Liu Y, Dai J, Tang D (2005) Glucose biosensor based on self-assembled gold nanoparticles and double-layer 2d-network (3-mercaptopropyl)-trimethoxy-silane polymer onto gold substrate. Sensor Actuator B 104 191-198... 

SBDC N,N-(diethylamino)dithiocarbamoylbenzyl(trimethoxy)silane SFM scanning force microscopy... 

A stock solution of the coupling agent was prepared by mixing the trimethoxy-silane with 10 1 acetone-water solutions. The stock solution concentrations were 2-3 g/100 ml for APMS and AAPS. The solution pH was not adjusted and the experiments were done at ambient temperature (21°C). From our kinetics studies we were convinced that the hydrolysis was completed under these... 

Reduction The asymmetric reduction of a series of aryl alkyl ketones with quaternary ammonium fluorides and silanes was reported by Drew and Lawrence [55]. In these reactions, the best catalysts (e.g., 6f) were from the qui ni ne/quinidine series in fact, a fluoride salt prepared from cinchonine gave no induction. The use of trimethoxysilane resulted in faster rates but lower enantioselectivites when compared with tris(trimethoxy)silane. It is interesting that, with the... 

In PE/aluminium laminates, which are used for packaging, the bond strength can be improved by surface oxidation of the polymer. An alternative to surface oxidation is to use copolymers of ethylene and monomers containing polar groups that can provide stronger bonds to metal thus increasing adhesion [24,25]. The effects of three functional groups in ethylene copolymers, namely EVS [polyethylene-co-vinyl trimethoxy silane], EBA [polyethylene-co-butyl acrylate], EAA [polyethylene-co-acrylic acid) on the adhesion was studied [25]. The interface in polymer/metal laminates has been analysed by FT-IR... 

Fig. 6 Immobilized functional nucleic acids, a Example fabrication of an aptamer biosen- sor surface (i) Attachment of (glycidoxypropyl)trimethoxy silane (GOPS) to glass surface at low pH results in the formation and subsequent cleavage of an epoxide, (ii) The resultant diol is activated with 1,1-carbonyldiimidazole (CDI) to form a carbonylimidazole.

Another advantage of the silicon oxide network is that it can be modified in various ways as shown in Fig. 18.2. One way is co-condensation of the most nsed tetramethylol silanes with other kinds of metal oxides. Another way is cohydrolysis and co-polycondensation with snbstitnted trimethoxy silanes where this substituent is, for example, a long alkyl chain for hydrophobation, an organic portion with polar structures for antistatic effects, a fluorocarbon for the release of water, oil and soil or a bioactive group. The easiest method of modification is the physical one, the simple addition of the desired chemicals. They are then incorporated in the porous network of the metal oxides and are released in a more or less controlled way. 

C7H1603 diethylene glycol ethyl methyl ether 1002-67-1 416.90 35.961 2 12390 C7H1803Si isobutyl(trimethoxy)silane 18395-30-7 418.65 36.126 1,2... 

In order to elaborate the reactivity profile of compounds 3a - 3d, the rate constants of the first hydrolysis step were determined by H NMR spectroscopy (pH = 4 or 9, 30-fold molar excess H2O). In addition to the methylene-bridged silanes 3a - 3d, 3-methacryloyloxypropyl-trimethoxysilane 3e, propyl trimethoxy silane 4a, vinyl trimethoxy silane 4b, as well as butyric acid... 

Vinyl trimethoxy silane CH2=CHSi(OCH3)3 526 None Water (pH 4.0-4.5)... 

---