Separator multi-phase system

Nanoparticles are frequently used as a suspension in some kind of solvent. This is a two phase mixture of suspended solid and liquid solvent and is thus an example of a colloid. The solid doesn t separate out as a precipitate partially because the nanoparticles are so small and partially because they are stabilised by coating groups that prevent their aggregation into a precipitate and enhance their solubility. Colloidal gold, which has a typical red colour for particles of less than 100 nm, has been known since ancient times as a means of staining glass. Colloid science is a mature discipline that is much wider than the relatively recent field of nanoparticle research. Strictly a colloid can be defined as a stable system of small particles dispersed in a different medium. It represents a multi-phase system in which one dimension of a dispersed phase is of colloidal size. Thus, for example, a foam is a gas dispersed in a liquid or solid. A liquid aerosol is a liquid dispersed in gas, whereas a solid aerosol (or smoke) is a solid dispersed in a gas. An emulsion is a liquid dispersed in a liquid, a gel is liquid dispersed in a solid and a soils a solid dispersed in a liquid or solid. We saw in Section 14.7 the distinction between sol and gel in the sol gel process. 

A series of pyrrolidines was conveniently prepared in a microwave-assisted double alkylation of aniline derivatives with alkyl dihalides in water in the presence of K2CO3 as a base (Scheme 1) [12,13]. Although the reaction mixture could be regarded as a multi-phase system, as neither reactant was soluble in the mildly basic aqueous medium, the microwave-assisted reaction proceeded readily without the use of phase-transfer reagents. The amount of side-reactions such as hydrolysis of bromides to alcohols in an alkaline reaction medium was substantially suppressed compared to the conventional thermal conditions. The reaction conditions were sufficiently mild to tolerate a variety of functional groups in anilines such as hydroxyls, ketones and esters. Alkyl bromides and tosylates were equally efficient as alkylating agents. Notably, isolation and purification comprised simply of phase separations (filtration or decantation) of the desired product from the aqueous media. 

The solution behavior of polymers has been intensively investigated in the past. Dilute solutions, where polymer-polymer interactions may be excluded, have become the basis for the characterization of the primary structure of macromolecules and their dimensions in solution. Besides this "classical" aspect of macromolecular science, interest has focussed on systems, where - due to strong polymer/polymer interactions - association of polymers causes supermolecular structures in homogeneous thermo-dynamically-stable isotropic and anisotropic solutions or in phase-separated multi-component systems. The association of polymers in solutions gives rise to unconventional properties, yielding new aspects for applications and multiple theoretical aspects. 

All of the considered processes relate to the separation of multi-phase, multi-component media, hence the title of the book. It should be noted that in the preparation technology for the transportation of oil, natural gas, and gas condensates, the term separation is traditionally understood only as the process of segregation of either a condensate and water drops or of gas and gas bubbles (occluded gas) from an oil. The concept of separation used herein can mean any segregation of components in multi-component mixtures or of phases in multi-phase systems. 

The compatibility of some ILs with water has allowed the development of a highly efficient multi-phase system for the Rh-catalyzed hydrogenation of enamides (turnover numbers of >10,000). In many cases, such IL/water combinations are superior to conventional organic solvents and biphasic ILs/organic co-solvents media with respect to catalytic performance as well as to catalyst separation and recycling. The best results were obtained with Rh-ferrocenyl-diphosphine catalysts (>99% ee) in [G8GiIm]BF4/water. ... 

Separation of reaction medium under multi-phase systems flow in... 

Equations of a relation between the parameters of a system based on a phase Gibbs rule follows from the principle of detailed equilibrium in its different displays. Thus, for a multi-phase system the principle of a detailed equilibrium requires the equilibrium of any two phases with each other. This permits to separate them and to consider them separately from others. General conditions for an equilibrium in an isolated system are reduced to partial conditions of thermal (temperature of all phases is equal), mechanical (at plain... 

Rietveld multi-phase quantitative analysis is also called as model method, and can solve X-ray quantitative problem in the multi-phase system. This method has the following advantages It is free of internal standards it is free of the standard sample there is no need to separate peaks and finally, it overcomes the effect of the structure. With the scale factors of and S-y of reference sample a-Fe203 and experimental sample 7-Fe20s obtained by multi-phase Rietveld analysis, the relative abundance of amorphous phase in sample can be calculated by the following equation. 

Crystallization-based separation of multi-component mixtures has widespread application. The technique consists of sequences of heating, cooling, evaporation, dilution, diluent addition and solid-liquid separation. Berry and Ng (1996, 1997), Cisternas and Rudd (1993), Dye and Ng (1995), Ng (1991) and Oyander etal. (1997) proposed various schemes based on the phase diagram. Cisternas (1999) presented an alternate network flow model for synthesizing crystallization-based separations for multi-component systems. The construction... 

The performance of the Sonogashira reaction is claimed to be the first example of a homogeneously metal-catalyzed reaction conducted in a micro reactor [120], Since the reaction involves multi-phase postprocessing which is needed for the separation of products and catalysts, continuous recycling technology is of interest for an efficient production process. Micro flow systems with micro mixers are one way to realize such processing. 

If it were possible to identify or quantitatively determine any element or compound by simple measurement no matter what its concentration or the complexity of the matrix, separation techniques would be of no value to the analytical chemist. Most procedures fall short of this ideal because of interference with the required measurement by other constituents of the sample. Many techniques for separating and concentrating the species of interest have thus been devised. Such techniques are aimed at exploiting differences in physico-chemical properties between the various components of a mixture. Volatility, solubility, charge, molecular size, shape and polarity are the most useful in this respect. A change of phase, as occurs during distillation, or the formation of a new phase, as in precipitation, can provide a simple means of isolating a desired component. Usually, however, more complex separation procedures are required for multi-component samples. Most depend on the selective transfer of materials between two immiscible phases. The most widely used techniques and the phase systems associated with them are summarized in Table 4.1. 

Notwithstanding all its advantages, the principle of solid-phase synthesis cannot be applied to all kinds of chemical reactions. Although reactants are used in excess, reaction is not always quantitative. The resulting impurities cannot be separated on the solid phase, giving rise to separation problems particularly in multi-step systems. Moreover, only limited use can often be made of conventional analytical methods (NMR, MS). Recent methods of 13C-NMR spectroscopy on solid phases [21] or in gel phases [22] are ideally suited for solid-phase synthesis, but are not universally available owing to the expensive instrumentation. 

---