Sealing Subject

Other important properties that can be measured in the laboratory include sealabiHty, printabiHty, or coating adhesion. Many of these tests have been developed by the film manufacturer in cooperation with customers and are specifically designed to measure product performance in the end use. Some tests, like sealabiHty, can be standardi2ed to time, pressure, and temperature of sealing with instmment-measured peel values, but other tests are subjective, such as evaluations of printing loss to puUoff by adhesive tape. 

If the temperature of the space in which an object is placed were truly constant, a sealed case having a constant absolute humidity would also have a constant relative humidity. Because temperature is subject to some variations and totally leakproof cases are not easy to buHd, a second solution is often sought by placing the objects in reasonably weU-sealed cases in which the relative humidity is kept at a constant value by means of a buffeting agent. 

Statistical control of an analysis or instmment is best demonstrated by SQC of a standard sample analysis. The preferred approach to demonstrate statistical control is to use a reference sample of the subject material that has been carefully analyzed or, alternatively, to use a purchased reference standard. Either material must be stored so that it remains unchanged, eg, sealed in ampuls or septum capped bottles. Periodically a sample can then be reanalyzed by the technique used for routine analysis. These results are plotted in a control chart. Any change in the stabihty of the test in question results in a lack of... 

AH vapors, including hotweH odors, are captured in a header system linked with the incineration air of a steam boiler or hot oil vaporizer. Drain seals avoid escape of odors from the sewer lines. This completely eliminates total reduced sulfur (TRS) emissions. The SO2 emissions are subject to local regulations. 

Container. The battery container is made up of a cover, vent caps, lead bushings, and case. Cost and appHcation are the two primary factors used to select the materials of constmction for container components. The container must be fabricated from materials that can withstand the abusive environment the battery is subjected to in its appHcation. It must also be inert to the corrosive environment of the electrolyte and soHd active materials, and weather, vibration, shock, and thermal gradients while maintaining its Hquid seal. 

Steel forged fittings with screwed ends may be installed without pipe dope in the threads and seal-welded (Fig. 10-130) to secure bubble-tight joints with a minimum of welders labor. They are not subject to deformation by pipe wrenches, and such couplings, bushings, and plugs are often used with the screwed fittings below. 

Quite often problems arise when instruments for normal seiwice are subjected to low temperature use. Since some metals become brittle at low temperatures, the instrument hteraUy falls apart. Elastomeric gaskets and seals contract faster with decreasing temperatures than the surrounding metal parts, and the seal often is lost. Even hermetically sealed instruments can develop pin holes or small cracks to permit ciyogenic liqmds to enter these cases with time. Warming the instrument causes the trapped hquid to vaporize, sometimes generating excessive gas pressure and failure of the case. 

Alternatively, reactant and product gases can be distributed to and removed from individual cells through internal pipes in a design analogous to that of filter presses, (iare must be exercised to assure an even flow distribution between the entiv and exit cells. The seals in internally manifolded stacks are generally not subject to electrical, thermal, and mechanical stresses, but are more numerous than in externally manifolded stacks. 

Consider the design of a glass window for a vacuum chamber (Fig. 18.6). It is a circular glass disc of radius R and thickness f, freely supported in a rubber seal around its periphery and subjected to a uniform pressure difference Ap = 0.1 MPa (1 atmosphere). The pressure bends the disc. We shall simply quote the result of the stress analysis of such a disc it is that the peak tensile stress is on the low-pressure face of... 

Another area that is addressed in the new edition is the dry gas seal. The subject of dry gas seals, which are now widely used by the industry. 

Car-Sealed Open Valve - Car-sealed open block valves are permissible in pressure reheving escape paths, provided that the single contingency of closing the CSO valve does not cause any equipment to be subjected to more than 1.5 times its design pressure. (Note Use of CSO valves is not recognized in all local codes.) The requirements for CSO valves are as follows ... 

Stress Relaxation. Another important consequence of the viscoelastic nature of plastics is that if they are subjected to a particular strain and this strain is held constant it is found that as time progresses, the stress necessary to maintain this strain decreases. This is termed stress relaxation and is of vital importance in the design of gaskets, seals, springs and snap-fit assemblies. This subject will also be considered in greater detail in the next chapter. 

---