Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Safety management system features

Specification An interface-level definition of the system, eg the key features of the safety management system that together coordinate safety across a distributed organisation. [Pg.151]

Most safety arguments eontain a set of assertions about processes and the eompe-tence of people with safety management responsibilities. The evidenee to support this type of argument comes fi om safety assessment/audit. A review takes place, independently of the day to day ineumbent, of the effectiveness and efficiency of the safety management system. It is an inherent feature of most systems that they are developed and improved within the scope of experience of a discrete set of professionals, and that it is easy for the working practices to have weaknesses which are difficult for the embedded staff to detect. [Pg.134]

All Safety Management Systems (SMSs) share fundamental features, regardless of technology or location. Some of these features are listed below, and then discussed in the following sections. [Pg.28]

Objectives should be integrated as a permanent feature of the safety management system. Objectives can be quantified and provide information on what works and does not work. [Pg.82]

Inspections, observations, and walk-throughs are a core feature of a safety management system. This subcommittee assists in coordinating the various types of surveys, reviews, and inspections of facilities and operations. It would review checklist and inspection formats to ensure that these remain current, are kept up to date and consistent and are routinely scheduled. The subcommittee assists in training on each of the various formats used (Coble et al., n.d.). [Pg.169]

As has been explained in the previous notes a key feature of any safety management system will be the preparation and implementation of a policy if an organisation is to effectively manage its safety obligations. [Pg.30]

The Author s proposal is to use the Country Safety Performance Function (CSPF) as a function to describe the relation between a country s normal and expected road fatahty rate and the variables of its social and economic, road transport and road safety management systems. The proposal offers a new application of the CSPF concept (Elvik 2004). The features of the function should include simplification, quantification and communications (Wegman Oppe, 2010). [Pg.102]

This chapter provides an overview of a management system for investigating process safety incidents. It opens with a review of management responsibilities and presents the important features that a management system must address to be effective. It examines systematic approaches that help implement incident investigation teams, root cause determinations, recommendations, follow-up, and documentation. [Pg.7]

Recommendations should be written clearly and should be practical to implement. Recommendations that target improvements to the inherent safety of the process design are preferred to those that merely add extra protection features. All recommendations will potentially change management systems therefore, it is necessary for the team to consider the imphcations of those changes when developing recommendations. [Pg.252]

There exists a whole battery of methods for the identification of hazards in the literature.4 The hazard identification techniques suitable for various stages of a project are shown in Table 3.1. Among the techniques noted in Table 3.1 the most important method is safety audits, which cover the management system and specific technical features at site level and the management system at plant level. [Pg.181]

After a short introduction to the company and its environmental management systems, the bulk of the report makes interesting use of Features , Reports and News articles to describe its accomplishments and present its views under the headings Product Stewardship , In-Process protection , Sites , Safety and Dialogue . The remainder of the report presents data and achievements against targets, and a historical overview of environmental protection at Bayer since 1901. [Pg.152]

MSA s EVOTECH full-body harness offers advanced design features that improve user comfort, ease of use, durability and user safety. The harness is RFID enabled, offering the Field ID Safety Network with Field ID access to provide a reliable, online inspection and safety compliance (ISCM) management system. MSA, wwwMSAnet.com/evotech,... [Pg.42]

A common feature of management activities is drat diey may be defined in terms of a set of processes. This is clearly the case for a safety (or quality) management system. Thus, an initial attempt to create a mediod could usefully be aimed at the risk analysis of such a system, using a process model. [Pg.162]


See other pages where Safety management system features is mentioned: [Pg.115]    [Pg.115]    [Pg.665]    [Pg.198]    [Pg.1796]    [Pg.339]    [Pg.8]    [Pg.5]    [Pg.217]    [Pg.578]    [Pg.1]    [Pg.13]    [Pg.137]    [Pg.86]    [Pg.130]    [Pg.130]    [Pg.363]    [Pg.389]    [Pg.31]    [Pg.89]    [Pg.33]    [Pg.134]    [Pg.1775]    [Pg.114]    [Pg.243]    [Pg.131]    [Pg.273]    [Pg.141]    [Pg.142]    [Pg.322]    [Pg.52]    [Pg.482]    [Pg.344]    [Pg.169]    [Pg.242]    [Pg.15]   
See also in sourсe #XX -- [ Pg.162 ]




SEARCH



Safety features

Safety management systems

System features

System safety manager

© 2024 chempedia.info