Safety and health program development

These goals eannot be realized without aeeomplishing the following  

---

Note to (b) Safety and health programs developed and implemented to meet other Federal, state, or local regulations are considered acceptable in meeting this requirement if they cover or are modified to cover the topics... 

The U.S. semiconductor industry has been a model for worker safety and health programs development. The ability to maintain an ongoing, industry-sponsored system of worker injury and illness surveillance for more than a decade has been unique in the American work force. Industry sponsorship of several, independent epidemiologic studies has represented a unified commitment to And answers to questions of reproductive health... 

In order to be consistent with the earlier chapters in this book related to safety and health program development, the four critical elements in a safety and health program will be anployed to demonstrate how to put safety and health program development to use by taking security as the subject. 

This book covers the myriad of accident prevention techniques that have been in use by the safety community for many years. These techniques run the gamut from safety and health program development to root cause analysis. Suffice it to say that much of what is in this book can be found in a variety sources both in the public and private domains. But, the opportunity to have a source that provides such a ready access to a comprehensive approach to accident/incident prevention is novel and... 

Chemical Research Development and Engineering Center Regulation (CRDECR) 385-1, 15 Aug 1986, Chemical and Occupational Safety and Health Program. 

To aid industry in a monitoring program designed to comply with these standards, the National Institute for Occupational Safety and Health (NI0SH), developed methods for the collection and analysis of those restricted compounds. Method P CAM-127 in the NIOSH Manual of Analytical Methods describes the recommended method of collection and analysis of organic solvents in air. (4)... 

Della-Giustina, D. E., Developing a Safety and Health Program, Lewis Publishers, Boca Raton, FI., 2000. 

Provide for the development, analysis, evaluation and approval of state occupational safety and health programs... 

A basic and genaal guideline to assist the safety and loss prevention professional to develop a safety and health program for a particular standard is provided below ... 

Within the safety and health realm, the vision for the safety and health program is often tied to creating and maintaining a safe and healthful work environment and/or reducing work-related injuries or illnesses. Safety and health professionals should provide the time and effort necessary to develop, establish, and integrate your safety and health vision into the company s or organization s vision that provides employees, contractors, and all others affiliated with your safety and health efforts a clear direction as to where your safety and health direction is focused. 

The identified common elements are the basic fonndation upon which a safety and health professional can bnild a snccessful safety and health program. Although all of the identified elements are important, the lynchpin of any successful safety and health program is the leadership of the management team as well as the funding and snpport to permit the development of the other essential elements. Under I2P2, each of the elements are farther clarified ... 

In order to develop and maintain an effective safety and health program, it is necessary to know not only the most common causes of death and injury but also the parts of the body most frequently injured. The most frequent injuries to specific parts of the body are listed below in order of most frequent injury to least frequent. 

Employers shall hire a qualified safety and health consultant to develop and implement an effective and comprehensive safety and health program or, where appropriate, a program to ensure full compliance with the subpart under which the employer was cited under the SVEP ... 

Members of the ZIO committee have said that the draft document to be submitted for public comment in the normal course of standard development will be representative of what has been learned about good safety management, and will be somewhat beyond the safety management guidelines issued in previous years that were then considered acceptable. An example of such previous issuances are the Safety and Health Program Management Guidelines published by the Occupational Safety and Health Administration (OSHA) in 1989. 

The person responsible for the work being performed in the laboratory is to be a competent scientist. This individual shall develop and implement a safety and health program for the facihty that meets the requirements of the OSHA Laboratory Standard. The individual workers are to be fuUy trained in the laboratory procedures being employed and to have received special training in the risks specifically associated with the materials or work being performed. The workers are to be informed about the means available to them to detect hazardous conditions and the emergency procedures that should be foUowed,... 

Since 1970, OSHA has issued more than 500 rules dealing with all aspects of worker safety and protection in the workplace. Recent amendments to the 1970 Act require employers to notify employees of potential workplace healfli hazards, including chemicals. OSHA regulates exposure to about 400 hazardous and toxic substances in the workplace that can cause harm. Under Seetion 18 of the OSH Act, states are allowed to assume the responsibility for developing and enforeing their own safety and health programs. To date, 25 states have OSHA-approved state plans. ... 

The standard requires each employer that falls under nrunber one or two above to develop and implement a written safety and health program which includes an emergency response plan (ERP). Those who fall under nrunber three must develop an ERP. An employer who will evacuate employees from the danger area when an emergency occurs, and who will not permit employees to assist with the emergency, is exempt from the ERP requirement if an emergency action plan is developed in accordance with 29 CFR 1926.35 is prepared. 

To reduce the occurrence of job-related fatalities, injuries, and illnesses, many jobsites take a proactive approach. They develop what is called an Injury and Illness Prevention Program, or I2P2 for short. It may be called other names too, such as Safety and Health Program. The program may include any and all of the following management elements ... 

Find a company that has developed a business case for its safety and health programs. Determine what cases it used to show the value of the programs to the company s management team. 

---