Rotary filtration

Usually the dtric add outweighs the biomass by a ratio of 5 1. The initial task is to remove the mycelium from the medium, a process usually carried out by rotary filtration. The wet biomass is crushed and rewashed to obtain most of the 15% dtric add contained within and the washings are added to the spent medium. 

RNA content of food and as food RNA content, 65 rotary filtration, 135 rotary vacuum filtration, 69 rpf systerrr, 222 rubrosterone, 300... 

Vacuum Rotary Filtration Used to dewater fine grained sediments capable of obtaining a filter cake of up to 35 - 40% solids and a solids capture rate of 88 - 95%. Least effective of tlie filtration metliods of dewatering. Energy intensive. Generates a wash water that must be treated. High... 

Restrictive Waste Characteristics. Energy-intensive filtration operations such as belt press filtration, vacuum rotary filtration, and pressure filters operate at optimal solids content. Sludges that range from 5 to 10 percent solids are generally well suited for these operations. 

Filtration is the separation of two phases, particulate form, ie, soHd particles or Hquid droplets, and continuous, ie, Hquid or gas, from a mixture by passing the mixture through a porous medium. This article discusses the more predominant separation of soHds from Hquids. Filtration of soHd particles or Hquid droplets from gases is dealt with elsewhere (see Airpollution controlmethods). The oldest recorded appHcations of filtration are the purifications of wine and water practiced by the ancient Greeks and Romans. Cake filters, such as the rotary vacuum filter and the filter press, were developed much later from the necessity to filter sewage. 

The type of floe requited depends on the separation process which foUows, eg, rotary vacuum filtration requites evenly sized, smaU, strong floes that capture ultrafines to prevent cloth blinding and cloudy filtrates. The floes should not be subject to sedimentation in the vat or breakage by the agitator. 

In the precoat mode, filter aids allow filtration of very fine or compressible soHds from suspensions of 5% or lower soHds concentration on a rotary dmm precoat filter. This modification of the rotary dmm vacuum filter uses an advancing knife continuously to skim off the separated soHds and the... 

Most continuous pressure filters available (ca 1993) have their roots in vacuum filtration technology. A rotary dmm or rotary disk vacuum filter can be adapted to pressure by enclosing it in a pressure cover however, the disadvantages of this measure are evident. The enclosure is a pressure vessel which is heavy and expensive, the progress of filtration cannot be watched, and the removal of the cake from the vessel is difficult. Other complications of this method are caused by the necessity of arranging for two or more differential pressures between the inside and outside of the filter, which requires a troublesome system of pressure regulating valves. 

Drum Filters. The rotary dmm filter, also borrowed from vacuum filtration, makes relatively poor use of the space available in the pressure vessel, and the filtration areas and capacities of such filters cannot possibly match those of the disk pressure filters. In spite of this disadvantage, however, the pressure dmm filter has been extensively developed. 

Use of ultrafiltration (UF) membranes is becoming increasingly popular for clarification of apple juice. AH particulate matter and cloud is removed, but enzymes pass through the membrane as part of the clarified juice. Thus pasteurization before UF treatment to inactivate enzymes prevents haze formation from enzymatic activity. Retention of flavor volatiles is lower than that using a rack-and-frame press, but higher than that using rotary vacuum precoat-filtration (21). 

Insofar as they are used to purify other products, several processes used in the refinery fall under the classification of dewaxing processes however, such processes must also be classified as wax production processes (2). Most commercial dewaxing processes utilize solvent dilution, chilling to crystallize the wax, and filtration (28). The MEK process (methyl ethyl ketone—toluene solvent) is widely used. Wax crystals are formed by chilling through the walls of scraped surface chillers, and wax is separated from the resultant wax—oil—solvent slurry by using fliUy enclosed rotary vacuum filters. 

In the propane process, part of the propane diluent is allowed to evaporate by reducing pressure so as to chill the slurry to the desired filtration temperature, and rotary pressure filters are employed. Complex dewaxing requires no refrigeration, but depends on the formation of a soHd urea—/ -paraffin complex which is separated by filtration and then decomposed. This process is used to make low viscosity lubricants which must remain fluid at low temperatures (refrigeration, transformer, and hydraulic oils) (28). 

Caustic soda is removed from the carbonate—bicarbonate solution by treating with a slight excess of hard-burned quicklime (or slaked lime) at 85—90°C in a stirred reactor. The regenerated caustic soda is separated from the calcium carbonate precipitate (lime mud) by centrifuging or rotary vacuum filtration. The lime mud retains 30—35% Hquid and, to avoid loss of caustic soda, must be weU-washed on the filter or centrifuge. Finally, the recovered caustic solution is adjusted to the 10% level for recycle by the addition of 40% makeup caustic soda. 

---