Remote materials

Connect firing leads to battery and switch. Mine can be remotely MATERIAL REQUIRED fired when needed or attached to trip device placed in path of ad ... 

The development of Remote Field Eddy Current probes requires experience and expensive experiments. The numerical simulation of electromagnetic fields can be used not only for a better understanding of the Remote Field effect but also for the probe lay out. Geometrical parameters of the prohe can be derived from calculation results as well as inspection parameters. An important requirement for a realistic prediction of the probe performance is the consideration of material properties of the tube for which the probe is designed. The experimental determination of magnetization curves is necessary and can be satisfactory done with a simple experimental setup. 

Use of One-Dimensional Skin-Effect Equations for Predicting Remote Field Characteristics Materials Evaluation Vol.47 / Jan.89... 

T R Schmidt. History of the Remote-Field Eddy Current Inspection Technique. Materials Evaluation Jan 1989... 

The material of interest is dissolved in a volatile solvent, spread on the surface and allowed to evaporate. As the sweep moves across, compressing the surface, the pressure is measured providing t versus the area per molecule, a. Care must be taken to ensure complete evaporation [1] and the film structure may depend on the nature of the spreading solvent [78]. When the trough area is used to calculate a, one must account for the area due to the meniscus [79]. Barnes and Sharp [80] have introduced a remotely operated barrier drive mechanism for cleaning the water surface while maintaining a closed environment. 

The next step is to apply a number of loss control credit factors such as process control (emergency power, cooling, explosion control, emergency shutdown, computer control, inert gas, operating procedures, reactive chemical reviews), material isolation (remote control valves, blowdown, drainage, interlocks) and fire protection (leak detection, buried tanks, fire water supply, sprinkler systems, water curtains, foam, cable protection). The credit factors are combined and appHed to the fire and explosion index value to result in a net index. 

Fiber-Optic Probes. Fiber-optic probes provide remote sampling capabilities to Raman instmmentation, are stable, and give reproducible signals. Their historical niche has been in environmental monitoring. More recently these probes have been used in chemical process control and related areas such as incoming materials inspection. 

A series of tests were performed at the AFC s National Reactor Testing Station in Idaho, starting in 1953. The reactor was situated outdoors, and was operated remotely. The core of the first version had fuel assembhes of aluminum and enriched uranium plates of the Materials Testing Reactor (MTR) type, installed in a water tank. One of the five control rods could be ejected downward and out of the core by spring action upon intermption of a magnet... 

The cost and price of sulfuric acid depend in large part on raw material cost and on freight costs. In many areas, the deUvered cost of sulfur is the most important factor affecting sulfuric acid pricing. By-product raw material, ie, SO2, costs at smelters are essentially zero, but the remote locations of many smelters make freight costs significant. Nevertheless, the nondiscretionary nature of smelter acid means that it must be sold if the smelter is to operate. 

Install fire safe bottom valves Install fire safe valves on major solvent lines Install remote shut off of fuel sources Eliminate points of leakage (flanges, hoses). Replace with fixed/welded pipes Move flammable material storage away from vessel (e.g., pallets, etc.)... 

---