Reactions termination steps

Termination steps (Section 4 17) Reactions that halt a chain reaction In a free radical chain reaction termination steps consume free radicals without generating new radicals to continue the chain... 

More complicated mechanisms of the same category are encountered in SrnI reactions (Section 2.5.6) where the electrocatalytic reaction, which corresponds to a zero-electron stoichiometry, is opposed to two-electron consuming side reactions (termination step in the chain process). 

Because of the precise control of the redox steps by means of the electrode potential and the facile measurement of the kinetics through the current, the electrochemical approach to. S rn I reactions is particularly well suited to assessing the validity of the. S rn I mechanism and identifying the side reactions (termination steps of the chain process). It also allows full kinetic characterization of the reaction sequence. The two key steps of the reaction are the cleavage of the initial anion radical, ArX -, and conversely, formation of the product anion radical, ArNu -. Modeling these reactions as concerted intramolecular electron transfer/bond-breaking and bond-forming processes, respectively, allows the establishment of reactivity-structure relationships as shown in Section 3.5. 

At this point, it can be concluded that the direct and indirect electrochemical approach of the reaction in the case of aryl halides has provided a quantitative kinetic demonstration of the mechanism and the establishment of the nature of the side-reactions (termination steps in the chain process). In poor H-atom donor solvents, the latter involve electron-transfer reduction of the aryl radical. 

Amatore, C., Pinson, J., Saveant, J. M., and Thiebault, A., Electron-transfer-induced reactions, termination steps and efficiency of the chain process in Sgjjl aromatic substitution, /. Am. Chem. Soc., 103, 6930, 1981. 

Polymerization reactions. There are two broad types of polymerization reactions, those which involve a termination step and those which do not. An example that involves a termination step is free-radical polymerization of an alkene molecule. The polymerization requires a free radical from an initiator compound such as a peroxide. The initiator breaks down to form a free radical (e.g., CH3 or OH), which attaches to a molecule of alkene and in so doing generates another free radical. Consider the polymerization of vinyl chloride from a free-radical initiator R. An initiation step first occurs ... 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

In practice side reactions intervene to reduce the efficiency of the propagation steps The chain sequence is interrupted whenever two odd electron species combine to give an even electron product Reactions of this type are called chain terminating steps Some commonly observed chain terminating steps m the chlorination of methane are shown m the following equations... 

Tlie formation of initiator radicals is not the only process that determines the concentration of free radicals in a polymerization system. Polymer propagation itself does not change the radical concentration it merely changes one radical to another. Termination steps also occur, however, and these remove radicals from the system. We shall discuss combination and disproportionation reactions as modes of termination. 

Autooxidation. Liquid-phase oxidation of hydrocarbons, alcohols, and aldehydes by oxygen produces chemiluminescence in quantum yields of 10 to 10 ° ein/mol (128—130). Although the efficiency is low, the chemiluminescent reaction is important because it provides an easy tool for study of the kinetics and properties of autooxidation reactions including industrially important processes (128,131). The light is derived from combination of peroxyl radicals (132), which are primarily responsible for the propagation and termination of the autooxidation chain reaction. The chemiluminescent termination step for secondary peroxy radicals is as follows ... 

Tertiary peroxyl radicals also produce chemiluminescence although with lower efficiencies. For example, the intensity from cumene autooxidation, where the peroxyl radical is tertiary, is a factor of 10 less than that from ethylbenzene (132). The chemiluminescent mechanism for cumene may be the same as for secondary hydrocarbons because methylperoxy radical combination is involved in the termination step. The primary methylperoxyl radical terminates according to the chemiluminescent reaction just shown for (36), ie, R = H. 

If the initiation reaction is much faster than the propagation reaction, then all chains start to grow at the same time. Because there is no inherent termination step, the statistical distribution of chain lengths is very narrow. The average molecular weight is calculated from the mole ratio of monomer-to-initiator sites. Chain termination is usually accompHshed by adding proton donors, eg, water or alcohols, or electrophiles such as carbon dioxide. 

Autoca.ta.Iysis. The oxidation rate at the start of aging is usually low and increases with time. Radicals, produced by the homolytic decomposition of hydroperoxides and peroxides (eqs. 2—4) accumulated during the propagation and termination steps, initiate new oxidative chain reactions, thereby increasing the oxidation rate. 

A factor in addition to the RTD and temperature distribution that affects the molecular weight distribution (MWD) is the nature of the chemical reaciion. If the period during which the molecule is growing is short compared with the residence time in the reactor, the MWD in a batch reactor is broader than in a CSTR. This situation holds for many free radical and ionic polymerization processes where the reaction intermediates are very short hved. In cases where the growth period is the same as the residence time in the reactor, the MWD is narrower in batch than in CSTR. Polymerizations that have no termination step—for instance, polycondensations—are of this type. This topic is treated by Denbigh (J. Applied Chem., 1, 227 [1951]). 

Addition polymerisation is effected by the activation of the double bond of a vinyl monomer, thus enabling it to link up to other molecules. It has been shown that this reaction occurs in the form of a chain addition process with initiation, propagation and termination steps. 

The step in which the reactive intermediate, in this case A-, is generated is called the initiation step. In the next four equations in the example above, a sequence of two reactions is repeated this is the propagation phase. Chain reactions are characterized by a chain length, which is the number of propagation steps that take place per initiation step. Finally, there are termination steps, which include any reactions that destroy one of the reactive intermediates necessary for the propagation of the chain. Clearly, the greater the frequency of termination steps, the lower the chain length will be. 

The result of the steady-state condition is that the overall rate of initiation must equal the total rate of termination. The application of the steady-state approximation and the resulting equality of the initiation and termination rates permits formulation of a rate law for the reaction mechanism above. The overall stoichiometry of a free-radical chain reaction is independent of the initiating and termination steps because the reactants are consumed and products formed almost entirely in the propagation steps. 

The observed rate law is then three-halves order in the reagent A2. In most real systems, the situation is complicated because more than one termination reaction makes a contribution to the total termination rate. A more complete discussion of the effect of termination steps on the form of the rate law has been given by Huyser. ... 

Termination Occasionally, two radicals might collide and combine to form a stable product. When that happens, the reaction cycle is broken and the chain is ended. Such termination steps occur infrequently, however, because the concentration of radicals in the reaction at any given moment is very small. Thus, the likelihood that two radicals will collide is also small. 

Problem 7.19 Oik- of the chain-termination steps that sometimes occurs to interrupt polymerization is the following reaction between two radicals. Propose a mechanism for the reaction, using fishhook arrows to indicate electron flow. 

The termination step of a polymerization involves a reaction which destroys the activity of the growing end and thus leads to cessation of its growth. The resulting polymeric molecule is frequently referred to as a dead polymer. If the activity of a growing chain is transferred to another molecule, the process is referred to as chain transfer if it is lost entirely, a normal termination step is involved. 

In anionic polymerization, as in carbonium ion polymerization, termination does not involve bimolecular reaction between two growing chains. Neither can recombination of ions lead to termination, since a carbon-metal bond is highly polar, in the case of alkali metals frequently completely ionized, and in every case very reactive. The termination step leading to the formation of a terminal C=C double bond is not too probable. This reaction involves the formation of a metal hydride, and this does not contribute greatly to the driving force. Consequently, such a termination is observed at higher temperatures only and it is probably more common in coordination polymerization where the metals involved are less electropositive. 

It remains a common misconception that radical-radical termination is suppressed in processes such as NMP or ATRP. Another issue, in many people s minds, is whether processes that involve an irreversible termination step, even as a minor side reaction, should be called living. Living radical polymerization appears to be an oxymoron and the heading to this section a contradiction in terms (Section 9.1.1). In any processes that involve propagating radicals, there will be a finite rate of termination commensurate with the concentration of propagating radicals and the reaction conditions. The processes that fall under the heading of living or controlled radical polymerization (e.g. NMP, ATRP, RAFT) provide no exceptions. 

Even though the rate of radical-radical reaction is determined by diffusion, this docs not mean there is no selectivity in the termination step. As with small radicals (Section 2.5), self-reaction may occur by combination or disproportionation. In some cases, there are multiple pathways for combination and disproportionation. Combination involves the coupling of two radicals (Scheme 5.1). The resulting polymer chain has a molecular weight equal to the sum of the molecular weights of the reactant species. If all chains are formed from initiator-derived radicals, then the combination product will have two initiator-derived ends. Disproportionation involves the transfer of a P-hydrogen from one propagating radical to the other. This results in the formation of two polymer molecules. Both chains have one initiator-derived end. One chain has an unsaturated end, the other has a saturated end (Scheme 5.1). 

---