Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Reactions carboxylic acid chloride

As with polyesters, the amidation reaction of acid chlorides may be carried out in solution because of the enhanced reactivity of acid chlorides compared with carboxylic acids. A technique known as interfacial polymerization has been employed for the formation of polyamides and other step-growth polymers, including polyesters, polyurethanes, and polycarbonates. In this method the polymerization is carried out at the interface between two immiscible solutions, one of which contains one of the dissolved reactants, while the second monomer is dissolved in the other. Figure 5.7 shows a polyamide film forming at the interface between an aqueous solution of a diamine layered on a solution of a diacid chloride in an organic solvent. In this form interfacial polymerization is part of the standard repertoire of chemical demonstrations. It is sometimes called the nylon rope trick because of the filament of nylon produced by withdrawing the collapsed film. [Pg.307]

A final method for the preparation of pyrido[2,3-carboxylic acid chlorides with enamines in the presence of base to give 6,7,8-trisubstituted 5-ones (253 254)... [Pg.229]

A. Reaction with Carboxylic Acid Chlorides, Anhydrides, and Ketenes 135... [Pg.115]

Because of the high polarity of the C=N double bonds, cyanuric chloride (120, R= Cl) is comparable with a carboxylic acid chloride. This explains its smooth reaction with diazomethane to yield dichloro-(diazomcthyl)-l,3,5-triazine (121, R = The analogous com-... [Pg.286]

Preparation of 2-Cyclopropylcarbony/amido-5-Chlorobenzophenone To 400.5 g (1.73 mols) of 2-amino-5-chlorobenzophenone dissolved in 220 g (2.18 mols) of triethylamine and 3.5 liters of tetrahydrofuran is added cautiously 181 g (1.73 mols) of cyclopropane-carboxylic acid chloride. The reaction is refluxed 2 /2 hours and allowed to cool to room temperature. The solvent is then removed under vacuum to obtain 2-cyclopropylcarbonyl-amido-5-chlorobenzophenone as a residue which is dissolved in 1 liter of methylene chloride, washed twice with 5% hydrochloric acid, and then twice with 10% potassium hydroxide. The methylene chloride solution is then dried over anhydrous magnesium sulfate, filtered and the solvent removed under vacuum. The residue is recrystallized from 1,500 ml of methanol, charcoal-treating the hot solution to give 356 g of 2-cyclopropylcarbonylamido-5-chlorobenzophenone, MP 105° to 105.5°C (69% yield). [Pg.1278]

Just as an aromatic ring is alkylated by reaction with an alkyl chloride, it is acylated by reaction with a carboxylic acid chloride, RCOC1, in the presence of AICI3. That is, an acyl group (-COR pronounced a-sil) is substituted onto the aromatic ring. For example, reaction of benzene with acetyl chloride yields the ketone, acetophenone. [Pg.557]

Problem 16.6 Identify the carboxylic acid chloride that might be used in a Friedel-Crafts acylation reaction to prepare each of the following acylbenzenes ... [Pg.560]

Alcohols react with carboxylic acids to give esters, a reaction that is common in both the laboratory and living organisms. In the laboratory, the reaction can be carried out in a single step if a strong acid is used as catalyst. More frequently, though, the reactivity of the carboxylic acid is enhanced by first converting it into a carboxylic acid chloride, which then reacts with the alcohol. We ll look in detail at the mechanisms of these reactions in Chapter 21. [Pg.623]

Nickel tetranitrophthalocyanine can be reduced to nickel tetraaminophthalocyanine with tin(II) chloride342 or sodium sulfide.319 343 To achieve better solubility, long alkanoyl side chains can be attached by the reaction of the amino groups with carboxylic acid chlorides.342 Copper(ll) tetranitrophthalocyanine 1 is reduced to the tetraamino compound 2 with sodium suinae." "... [Pg.822]

The procedure described here illustrates the preparation of mixed lithium arylhetero(alkyl)cuprate reagents and their reactions with carboxylic acid chlorides,4 These mixed cuprate reagents also react with a,a -dibromoketones,12 primary alkyl halides,4 and a,/3-unsaturated ketones,4 with selective transfer of only the alkyl group. [Pg.126]

The reaction of tert-alkyl Grignard reagents with carboxylic acid chlorides in the presence of a copper catalyst provides ieri-alkyl ketones in substantially lower yields than those reported here.4,14 The simplicity and mildness of experimental conditions and isolation procedure, the diversity of substrate structural type, and the functional group selectivity of these mixed organocuprate reagents render them very useful for conversion of carboxylic acid chlorides to the corresponding secondary and tertiary alkyl ketones.15... [Pg.126]

Carboxylic acids, a-bromination of 55, 31 CARBOXYLIC ACID CHLORIDES, ketones from, 55, 122 CARBYLAMINE REACTION, 55, 96 Ceric ammonium nitrate [Ammonium hexa mtrocerate(IV)[, 55, 43 Chlorine, 55, 33, 35, 63 CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Cinnamomtnle, a-phenyl- [2-Propeneni-tnle 2,3-diphenyl-], 55, 92 Copper(l) iodide, 55, 105, 123, 124 Copper thiophenoxide [Benzenethiol, copper(I) salt], 55, 123 CYCLIZATION, free radical, 55, 57 CYCLOBUTADIENE, 55, 43 Cyclobutadieneiron tricarbonyl [Iron, tn-carbonyl(r)4-l,3-cyclo-butadiene)-], 55,43... [Pg.140]

Many procedures for the formation of carboxylic acid amides are known in the literature. The most widely practiced method employs carboxylic acid chlorides as the electrophiles which react with the amine in the presence of an acid scavenger. Despite its wide scope, this protocol suffers from several drawbacks. Most notable are the limited stability of many acid chlorides and the need for hazardous reagents for their preparation (thionyl chloride, oxalyl chloride, phosgene etc.) which release corrosive and volatile by-products. Moreover, almost any other functional group in either reaction partner needs to be protected to ensure chemoselective amide formation.2 The procedure outlined above presents a convenient and catalytic alternative to this standard protocol. [Pg.137]

The course of the reaction of phosphinous amides with carboxylic acid chlorides is dependent on the characteristics of the iV-residue. Thus with N-aryl compounds this reaction gives chlorophosphanes and carboxamides. With AT-alkyl analogs the primary reaction products have not been identified but they hydrolyzed to carboxaldehydes [120]. [Pg.90]

A few of the important reactions carboxylic acids undergo are shown above. Soap is made by reacting sodium or potassium hydroxide with long-chain acids such as C17H35COOH (stearic acid). Acid chlorides and acid anhydrides are more reactive than their corresponding carboxylic acids and are used in the chemical industry to make various acid derivatives. A very important industrial reaction is the reaction of carboxylic acids (or the chlorides or anhydrides) with alcohols to form esters. [Pg.66]

In the second part of this activity, you will prepare nylon, which is a polyamide with many amide functional groups. A common method for preparing amides is the reaction of a carboxylic-acid chloride with an amine, as in RCOCI + R NH2 - RCONHR + HCI. [Pg.181]

Amino acids activated at the amino group by a benzotriazolide moiety react with amino acids under elimination of benzotriazole and C02 to give peptides. Reaction is achieved by warming up equimolar amounts of the components in anhydrous acetonitrile or aqueous acetone.[45] The benzotriazolylcarbonylamino acids are prepared from benzo-triazolyl-1-carboxylic acid chloride and amino acids.[46]... [Pg.158]

Arndtsen and coworkers [154] described the first Pd-catalyzed synthesis of miinchnones 6/1-318 from an imine 6/1-316, a carboxylic acid chloride 6/1-317 and CO. The formed 1,3-dipol 6/1-318 can react with an alkyne 6/1-319 present in the reaction mixture to give pyrroles 6/1-321 via 6/1-320, in good yields. The best results in this four-component domino process were obtained with the preformed catalyst 6/1-322 (Scheme 6/1.83). [Pg.412]

Preparation of diethyl isobutyrylphosphonate — Reaction of a trialkyl phosphite with a carboxylic acid chloride... [Pg.8]

Finer particle sizes are obtained if l,9-anthrapyrimidine-2-carboxylic acid chloride is condensed with 1-aminoanthraquinone in a dipolar aprotic solvent (such as N-methylpyrrolidone) at a temperature between 70 and 110°C. The reaction may be accelerated by using a proton acceptor such as triethylamine or tert-butanol,... [Pg.512]

Doubling the quinophthalone structure may also be achieved through condensation of two equivalents of 3-hydroxy-quinophthalone carboxylic acid chloride with aromatic diamines [7], The reaction affords orange pigments (140). The acid chloride is prepared from 3-hydroxyquinaldine-4-carboxylic acid and benzene-1,2,4-tricarboxylic acid. [Pg.538]

Reactions of Phosphonic and Phosphinic Acid Derivatives.—The reactions of phos-phonic and thiophosphonic amides and chlorides with carboxylic acid chlorides and amides have been discussed.101 Dialkyl alkylphosphonates and alkyl dialkylphos-phinates may be used for the iV-alkylation of imidazoles, triazoles, and pyrroles.105... [Pg.124]

The reaction with carboxylic acid and acid anhydride is carried out in the presence of a small amount of concentrated sulphuric acid. The reaction is reversible, and therefore, water is removed as soon as it is formed. The reaction with acid chloride is carried out in the presence of a base (pyridine) so as to neutralise HCl which is formed during the reaction. It shifts the equilibrium to the right hand side. The introduction of acetyl (CH3CO) group in alcohols or phenols is known as acetylation. Acetylation of salicylic acid produces aspirin. [Pg.61]

Eaton and co-workers also reported the synthesis of 1,3,5-trinitrocubane and 1,3,5,7-tetranitrocubane (39) ° The required tri- and tetra-substituted cubane precursors were initially prepared via stepwise substitution of the cubane core using amide functionality to permit ort/jo-lithiation of adjacent positions. The synthesis of precursors like cubane-1,3,5,7-tetracarboxylic acid was long and inefficient by this method and required the synthesis of toxic organomercury intermediates. Bashir-Hashemi reported an ingenious route to cubane-1,3,5,7-tetracarboxylic acid chloride (35) involving photochemical chlorocarbonylation of cubane carboxylic acid chloride (34) with a mercury lamp and excess oxalyl chloride. Under optimum conditions this reaction is reported to give a 70 8 22 isomeric mixture of 35 36 37... [Pg.72]

Acid anhydride formed by the reaction of acid chloride with carboxylic acid inthe presence of pyridine. [Pg.201]

Propantheline Propanetheline, A-methyl-iV-(l-methylethyl)-iV-[2-[(9/f-xanthen-9-ylcarbonyl) oxy]ethyl]-2-propanaminium bromide (14.1.11), is synthesized by reacting xan-then-9-carboxylic acid chloride with 2-di-MO-propylaminoethanol, giving the ester (14.1.10), which upon reaction with methylbromide turns into the quaternary salt, propantheline (14.1.11) [12,13]. [Pg.199]


See other pages where Reactions carboxylic acid chloride is mentioned: [Pg.113]    [Pg.33]    [Pg.70]    [Pg.26]    [Pg.323]    [Pg.505]    [Pg.1484]    [Pg.1290]    [Pg.191]    [Pg.77]    [Pg.156]    [Pg.61]    [Pg.191]    [Pg.47]    [Pg.39]    [Pg.133]    [Pg.51]    [Pg.184]    [Pg.154]    [Pg.360]    [Pg.154]    [Pg.36]   
See also in sourсe #XX -- [ Pg.126 ]




SEARCH



Acid chloride, alcohols from reaction with carboxylate ions

Acid chlorides, reactions

Carboxylates chloride

Carboxylic acid chlorides

Carboxylic acid chlorides diazomethane reactions

Carboxylic acid chlorides reaction with

Carboxylic acid chlorides, acylation reactions

Carboxylic acids acid chlorides

Carboxylic acids reaction with oxalyl chloride

Carboxylic acids reaction with thionyl chloride

Carboxylic acids reactions

Diazomethane reaction with carboxylic acid chlorides

Phosphorus chloride reaction with carboxylic acids

Thionyl chloride, reaction with carboxylic acid derivs

© 2024 chempedia.info