Radioactive isotopes importance

An important characteristic property of a radioactive isotope is its half-life, fj/2, which is the amount of time required for half of the radioactive atoms to disintegrate. For first-order kinetics the half-life is independent of concentration and is given as... 

Many artificial (likely radioactive) isotopes can be created through nuclear reactions. Radioactive isotopes of iodine are used in medicine, while isotopes of plutonium are used in making atomic bombs. In many analytical applications, the ratio of occurrence of the isotopes is important. For example, it may be important to know the exact ratio of the abundances (relative amounts) of the isotopes 1, 2, and 3 in hydrogen. Such knowledge can be obtained through a mass spectrometric measurement of the isotope abundance ratio. 

A radioisotope is an atom the nucleus of which is not stable and which decays to a more stable state by the emission of various radiations. Radioactive isotopes, also called nucHdes or radionucHdes, are important to many areas of scientific research, as well as ia medical and iadustrial appHcations (see... 

The radioactive isotope Cs is important commercially in process control instmments and for sewage sludge sterilisation. The isotope has along half-life — 30 yi )i however, it must be weU-shielded because of the high biological hasard. 

Phosphorus has only one stable isotope, J P, and accordingly (p. 17) its atomic weight is known with extreme accuracy, 30.973 762(4). Sixteen radioactive isotopes are known, of which P is by far the most important il is made on the multikilogram scale by the neutron irradiation of S(n,p) or P(n,y) in a nuclear reactor, and is a pure -emitter of half life 14.26 days, 1.7()9MeV, rntan 0.69MeV. It finds extensive use in tracer and mechanistic studies. The stable isotope has a nuclear spin quantum number of and this is much used in nmr spectroscopy. Chemical shifts and coupling constants can both be used diagnostically to determine structural information. 

In 1934 Fermi decided to bombard uranium with neutrons in an attempt to produce transuranic elements, that is, elements beyond uranium, which is number 92 in the periodic table. He thought for a while that he had succeeded, since unstable atoms were produced that did not seem to correspond to any known radioactive isotope. I le was wrong in this conjecture, but the research itself would eventually turn out to be of momentous importance both for physics and for world history, and worthy of the 1938 Nobel Pri2e in Physics. 

Perhaps the most important first-order reaction is that of radioactive decay, in which an unstable nucleus decomposes (Chapter 2). Letting X be the amount of a radioactive isotope present at time t,... 

For the purposes of analytical chemistry, four kinds of monochromatic beams need to be considered. (The quotation marks are to remind the reader that the beams under discussion are not always truly monochromatic.) Three kinds of beams—those produced by Bragg reflection (4.9), filtered beams (4.6), beams in which characteristic lines predominate over a background that can be neglected— will be discussed later ( 6.2). The fourth kind of beam contains monochromatic x-rays that are a by-product of our atomic age and that promise to grow in importance they are given off by radioactive isotopes. These x-rays must not be confused with 7-rays (11.1), which also originate from radioactive atoms but which differ from x-rays because the transformation that leads to radiation involves the nucleus. 

The constant half-life of a nuclide is used to determine the ages of archaeological artifacts. In isotopic dating, we measure the activity of the radioactive isotopes that they contain. Isotopes used for dating objects include uranium-238, potassium-40, and tritium. However, the most important example is radiocarbon dating, which uses the decay of carbon-14, for which the half-life is 5730 a. 

The important phenomenon of exponential decay is the prototype first-order reaction and provides an informative introduction to first-order kinetic principles. Consider an important example from nuclear physics the decay of the radioactive isotope of carbon, carbon-14 (or C). This form of carbon is unstable and decays over time to form nitrogen-14 ( N) plus an electron (e ) the reaction can be written as... 

Until the advent of modem physical methods for surface studies and computer control of experiments, our knowledge of electrode processes was derived mostly from electrochemical measurements (Chapter 12). By clever use of these measurements, together with electrocapillary studies, it was possible to derive considerable information on processes in the inner Helmholtz plane. Other important tools were the use of radioactive isotopes to study adsorption processes and the derivation of mechanisms for hydrogen evolution from isotope separation factors. Early on, extensive use was made of optical microscopy and X-ray diffraction (XRD) in the study of electrocrystallization of metals. In the past 30 years enormous progress has been made in the development and application of new physical methods for study of electrode processes at the molecular and atomic level. 

Although much of the preceding discussion involved the synthesis of new molecules by organic and inorganic chemists, there is another area of chemistry in which such creation is important—the synthesis of new atoms. The periodic table lists elements that have been discovered and isolated from nature, but a few have been created by human activity. Collision of atomic particles with the nuclei of existing atoms is the normal source of radioactive isotopes and of some of the very heavy elements at the bottom of the periodic table. Indeed nuclear chemists and physicists have created some of the most important elements that are used for nuclear energy and nuclear weapons, plutonium in particular. 

Precise quantifications are an important quality in molecular biology. There are slight differences in the methods used for global and targeted proteomics. In experiments intended to visualize as many proteins as possible, it is highly desirable to have a parallel quantification method that builds on the display technique. For 2D gel electrophoresis, fluorescent staining methods are under development (Urwin and Jackson, 1993), but they still lack overall sensitivity. Labeling proteins with radioactive isotopes is the most precise method for quantification but is limited to cell cultures, and alternatives are desirable. Recently, a precise method... 

Other immunoassays are based on the same antibody-antigen binding reaction but use a different labeling system for detection. Instead of an enzyme label, there are radioactive isotopes, and fluorescent and luminescent labels. Some important immunoassays are defined below ... 

Zirconium-95 is the most important of the artificial radioactive isotopes of zirconium. It is placed in pipelines to trace the flow of oil and other fluids as they flow through the pipes. It is also used as a catalyst in petroleum-cracking plants that produce petroleum products from crude oil. 

The most important radioactive isotope of neptunium is Neptunium-237, with a half-life of 2.l44xl0+ years, or about 2.1 million years, and decays into protactinium-233 through alpha decay. Neptunium s most important use is in nuclear research and for instruments designed to detect neutrons. 

The most important use of barium is as a scavenger in electronic tubes. The metal, often in powder form or as an alloy with aluminum, is employed to remove the last traces of gases from vacuum and television picture tubes. Alloys of barium have numerous applications. It is incorporated to lead alloy grids of acid batteries for better performance and added to molten steel and metals in deoxidizing alloys to lower the oxygen content. Thin films of barium are used as lubricant suitable at high temperatures on the rotors of anodes in vacuum X-ray tubes and on alloys used for spark plugs. A few radioactive isotopes of this element find applications in nuclear reactions and spectrometry. 

Studying these isotopes provides fertile ground for physicists and chemists to gain a better understanding of the properties and behavior of nuclei. This field of research also has important applications. For example, radioisotopes—radioactive isotopes—that emit certain particles are critical in some medical treatments such as radiation therapy, which is used to kill cancer cells, and positron emission tomography (PET), which is extremely useful in imaging parts of the body. 

The isotopic compositions of several elements have changed since the formation of the solar system. Radioactive isotopes have decayed, and the abundances of their daughter isotopes have increased over time. For long-lived isotopes of particular importance to radiochronology (flagged with an asterisk), Table 4.2 gives both the present abundance and the abundance at the time the solar system formed (italicized values). 

One of the more important factors affecting the isolation of radioactive waste is the rate of release of the radioactivity from the solid waste form to the environment. The most probable mechanism for release and transport of radioactivity from a solid waste form is by leaching of radioactive isotopes with groundwater. The objective of leach-testing various waste forms is to evaluate the rate at which specific hazardous radionuclides migrate from waste if and when the waste form comes in contact with groundwater. In this paper, measurement of leach rates of radioactive waste by a method which incorporates neutron activation is described. 

The initial interest in deuterium labeling for biological experiments, which was begun in the 1930 s, soon faded in favor of the use of radioactive isotopes. Up until about ten years ago, deuterium labeling was used sporadically, mainly for reaction mechanism studies. An important upsurge in the use... 

---