Radiation-curable adhesives applications pressure-sensitive

Nearly 42% of the demand for all adhesives comes from the packaging sector. Radiation-curable adhesives are used primarily for packaging, with paper and paperboard the dominant materials used in the packaging. Radiation-curable adhesives can be used on glass, metal and some plastic materials. Other applications for radiation-curable adhesives are in healthcare, electronics, communications, pressure-sensitive tape and consumer applications. Ultraviolet (UV)-curable adhesives are best suited to small-scale applications, while electron beam (EB)-curable adhesives are more appropriate in high-volume applications (an EB system has a higher installation cost). One additional characteristic of EB-curable adhesives is that they can cure the area between two substrates. UV light-cured adhesives can also be applied on heat-sensitive substrates and are not affected by ambient temperature or humidity. 

Cross-linkable monomers may be included to make the formulated adhesive curable by catalysis, heat, or radiation, thereby improving the performance of the film, especially at higher temperatures. Since the dispersion has both toughness and tack built in, no further compounding is necessary, making pressure-sensitive acrylic dispersions the easiest products to work with. In most applications, however, the formulator will prefer to modify the properties to order, and use of tackifying resins added either in solution or as a dispersion is common. Vinyl ethers can again be used either as sole binders or as tackifiers to modify the properties of the base dispersion. 

Radiation-curable Pressure-sensitive adhesives (PSA s) eliminate the release of organic solvents into the atmosphere and provide for easier application of the formulation onto the substrate. ... 

---