Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Pulsed engine

Pulse Engineering PE-5150E downloaded. J Pulse Engin Inductor, 60 MicroHenry, 1... [Pg.579]

Pulse Engineering PE-51516 Inductor Pulse Engin. Inductor, 98 MicroHenry, 6... [Pg.579]

Pulse Engineering POL 12208 TMP-16 TO-220 Bushing TO-220 Mice TOP 223Y UC3825A TMP-13... [Pg.592]

We now pick a promising off-the-shelf inductor — the PO150 from Pulse Engineering. Its inductance is 137 p,H, which is close to our requirement of 127 p,H, and it is rated for a continuous dc of 0.99 A, which is very close to our requirement of 1 A. Its datasheet is reproduced in Table 2-7. Note that the other conditions mentioned by the vendor do not match our application (but that is not unexpected — what are the chances of an off-the-shelf inductor that precisely matches a given application ). Nevertheless we can perform a full analysis, and thus either validate, or invalidate our choice of component. [Pg.112]

Pulse, Engineering resins, Dow Plastics Pulse Pleat, Eilter elements, BHA Group, Inc. Pulstar, Pultrusion machinery and equipment, Strongwell Corp. [Pg.930]

The common civil engineering seismic testing techniques work on the principles of ultrasonic through transmission (UPV), transient stress wave propagation and reflection (Impact Echo), Ultrasonic Pulse Echo (UPE) and Spectral Analysis of Surface Waves (SASW). [Pg.1003]

H. S. Savage and R. G. McCormack, Arc Sprayed Coatings for Electromagnetic Pulse Protection, USA-CERL Technical Report M-89 /15, U.S. Army Corps of Engineers, Washington, D.C., 1989. [Pg.140]

Oxidation Catalyst. An oxidation catalyst requires air to oxidize unbumed hydrocarbons and carbon monoxide. Air is provided with an engine driven air pump or with a pulse air device. Oxidation catalysts were used in 1975 through 1981 models but thereafter declined in popularity. Oxidation catalysts may be used in the future for lean bum engines and two-stroke engines. [Pg.491]

Its operation ean be seen as analogous to a meehanieal flywheel and a one-piston engine. The L-C Alter, like the flywheel, stores energy between the power pulses of the driver. The input to the L-C Alter choke input filter) is the ehopped input voltage. The L-C Alter volt-time averages this duty-cyele modulated input voltage waveform. The L-C Altering funetion ean be approximated by... [Pg.22]

Flywheels are found in internal-combustion engines, where they damp out torque pulses caused by the periodic firing of cylinders. In this application, energy is stored veiy briefly before it is used— for less than one revolution of the wheel itself... [Pg.502]

Rymarz, T. M., How to Specify Pulse-Jet Filters, Chem. Engineering March 31, 1975, p. 97. [Pg.287]

Harmonics or multiples of 2, 3, 4, etc., of this frequency will exist and be dominant for two-cycle gas engines, and one half multiples will be dominant for four-cycle engines. If several single-acting cylinders are operating on the same system in parallel, the magnitude of the pulses will depend upon the combination of cylinders and crank throws, and this magnitude is additive for the simultaneous waves in phase. [Pg.596]


See other pages where Pulsed engine is mentioned: [Pg.11]    [Pg.590]    [Pg.590]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.825]    [Pg.66]    [Pg.259]    [Pg.264]    [Pg.168]    [Pg.52]    [Pg.11]    [Pg.590]    [Pg.590]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.591]    [Pg.825]    [Pg.66]    [Pg.259]    [Pg.264]    [Pg.168]    [Pg.52]    [Pg.913]    [Pg.1215]    [Pg.182]    [Pg.210]    [Pg.13]    [Pg.140]    [Pg.1130]    [Pg.1837]    [Pg.142]    [Pg.506]    [Pg.294]    [Pg.331]    [Pg.353]    [Pg.451]    [Pg.561]    [Pg.1090]    [Pg.1093]    [Pg.287]   
See also in sourсe #XX -- [ Pg.66 ]

See also in sourсe #XX -- [ Pg.52 ]




SEARCH



Performance Estimates of an Idealized Pulse Detonation Engine

Pulsed detonation engines

Pulsed engineering aspects

© 2024 chempedia.info