Input filters choke

Its operation ean be seen as analogous to a meehanieal flywheel and a one-piston engine. The L-C Alter, like the flywheel, stores energy between the power pulses of the driver. The input to the L-C Alter choke input filter) is the ehopped input voltage. The L-C Alter volt-time averages this duty-cyele modulated input voltage waveform. The L-C Altering funetion ean be approximated by... 

As one can see, there is the familiar choke input filter (T-C) on the output, which is characteristic of the buck and all forward-mode converters. The configuration shown in Figure 4—10 is called a parallel resonant topology because the load impedance (the T-C filter acting as a damping impedance) is placed in parallel to the resonant capacitor. The input to the T-C filter stage... 

A full wave rectifier with a choke input L type RC filter (as shown in Fig. 10.22(a)) improves the ripple factor and DC regulation. The ripple voltage across R and C for the first harmonic is given by... 

The DC filter choke is used for ripple voltage and current reduction on the output of the switching power supply immediately following the existing filters. It is also used as an EMI filter on switching power supplies that have a single power line on the input, such as battery and distributed power systems. 

Sometimes the high-frequency attenuation is insufficient to meet the specifications and a third pole needs to be added to the EMI filter. This filter is typically a differential-mode filter and will share the Y capacitors from the common-mode filter. Its corner frequency is typically the same as the commonmode filter. This filter is made up of a separate choke on each power line, and is placed between the input rectifiers and the common-mode filter. 

There are certain things we may do unintentionally at the input of the converter that can have a major impact on the performance of the EMI filter, and also the converter itself. If we don t know the rules of the game, we can end up saturating our filter chokes and even inducing instability. 

---