Profile, dynamic

DO profile dynamics. The dynamical characteristics of the DO profile are illustrated by simulation of a plant, consisting of an aerator with four CSTR in series, each one having organic removal but no nitrification. The return sludge concentration is assumed constant, which is a reasonable assumption as long as the return sludge flow rate is constant and the settler sludge buffer is positive. 

Local Geological and Geotechnical Site Conditions (Soil Type, Layer Thickness, Ground Water Level, Shear Wave Velocity Profile, Dynamic Soil Properties for Each Soil Type)... 

Two simulation methods—Monte Carlo and molecular dynamics—allow calculation of the density profile and pressure difference of Eq. III-44 across the vapor-liquid interface [64, 65]. In the former method, the initial system consists of N molecules in assumed positions. An intermolecule potential function is chosen, such as the Lennard-Jones potential, and the positions are randomly varied until the energy of the system is at a minimum. The resulting configuration is taken to be the equilibrium one. In the molecular dynamics approach, the N molecules are given initial positions and velocities and the equations of motion are solved to follow the ensuing collisions until the set shows constant time-average thermodynamic properties. Both methods are computer intensive yet widely used. 

In Fig. III-7 we show a molecular dynamics computation for the density profile and pressure difference P - p across the interface of an argonlike system [66] (see also Refs. 67, 68 and citations therein). Similar calculations have been made of 5 in Eq. III-20 [69, 70]. Monte Carlo calculations of the density profile of the vapor-liquid interface of magnesium how stratification penetrating about three atomic diameters into the liquid [71]. Experimental measurement of the transverse structure of the vapor-liquid interface of mercury and gallium showed structures that were indistinguishable from that of the bulk fluids [72, 73]. 

Both the Monte Carlo and the molecular dynamics methods (see Section III-2B) have been used to obtain theoretical density-versus-depth profiles for a hypothetical liquid-vapor interface. Rice and co-workers (see Refs. 72 and 121) have found that density along the normal to the surface tends to be a... 

It was noted in connection with Eq. III-56 that molecular dynamics calculations can be made for a liquid mixture of rare gas-like atoms to obtain surface tension versus composition. The same calculation also gives the variation of density for each species across the interface [88], as illustrated in Fig. Ill-13b. The density profiles allow a calculation, of course, of the surface excess quantities. 

SIMS is, strictly speaking, a destructive teclmique, but not necessarily a damaging one. In the dynamic mode, used for making concentration depth profiles, several tens of monolayers are removed per minute. In static SIMS, however, the rate of removal corresponds to one monolayer per several hours, implying that the surface structure does not change during the measurement (between seconds and minutes). In this case one can be sure that the molecular ion fragments are truly indicative of the chemical structure on the surface. 

Hwang G S, Anderson C M, Gordon M J, Moore T A, Minton T K and Glapis K P 1996 Gas-surface dynamics and profile evolution during etching of silicon Phys. Rev. Lett. 77 3049-51... 

In an ambitious study, the AIMS method was used to calculate the absorption and resonance Raman spectra of ethylene [221]. In this, sets starting with 10 functions were calculated. To cope with the huge resources required for these calculations the code was parallelized. The spectra, obtained from the autocorrelation function, compare well with the experimental ones. It was also found that the non-adiabatic processes described above do not influence the spectra, as their profiles are formed in the time before the packet reaches the intersection, that is, the observed dynamic is dominated by the torsional motion. Calculations using the Condon approximation were also compared to calculations implicitly including the transition dipole, and little difference was seen. 

Fig. 7.12 Experimental and calculated infrared spectra for liquid water. The black dots are the experimental values. The thick curve is the classical profile produced by the molecular dynamics simulation. The thin curve is obtained by applying quantum corrections. (Figure redrawn from Guilbt B 1991. A Molecular Dynamics Study of the Infrared Spectrum of Water. Journal of Chemical Physics 95 1543-1551.)...

Equilibrium Theory. The general features of the dynamic behavior may be understood without recourse to detailed calculations since the overall pattern of the response is governed by the form of the equiUbrium relationship rather than by kinetics. Kinetic limitations may modify the form of the concentration profile but they do not change the general pattern. To illustrate the different types of transition, consider the simplest case an isothermal system with plug flow involving a single adsorbable species present at low concentration in an inert carrier, for which equation 30 reduces to... 

Adsorption Dynamics. An outline of approaches that have been taken to model mass-transfer rates in adsorbents has been given (see Adsorption). Detailed reviews of the extensive Hterature on the interrelated topics of modeling of mass-transfer rate processes in fixed-bed adsorbers, bed concentration profiles, and breakthrough curves include references 16 and 26. The related simple design concepts of WES, WUB, and LUB for constant-pattern adsorption are discussed later. 

Computer Models, The actual residence time for waste destmction can be quite different from the superficial value calculated by dividing the chamber volume by the volumetric flow rate. The large activation energies for chemical reaction, and the sensitivity of reaction rates to oxidant concentration, mean that the presence of cold spots or oxidant deficient zones render such subvolumes ineffective. Poor flow patterns, ie, dead zones and bypassing, can also contribute to loss of effective volume. The tools of computational fluid dynamics (qv) are useful in assessing the extent to which the actual profiles of velocity, temperature, and oxidant concentration deviate from the ideal (40). 

Two elastomers have been commercialized with unique property profiles. One has fluoroalkoxy substituents that provide resistance to many fluids, especially to hydrocarbons. This material also has a broad use temperature range and useful dynamic properties. Aryloxy substituents provide flame retardant materials without halogens. 

FIG. 13-109a Resp onses after a 30 percent increase in the feed flow rate for the mnlticomponent-dynamic-distillation example of Fig. 13-100. Profiles of liquid mole fractions at several times. 

When the two liquid phases are in relative motion, the mass transfer coefficients in eidrer phase must be related to die dynamical properties of the liquids. The boundary layer thicknesses are related to the Reynolds number, and the diffusive Uansfer to the Schmidt number. Another complication is that such a boundaty cannot in many circumstances be regarded as a simple planar interface, but eddies of material are U ansported to the interface from the bulk of each liquid which change the concenuation profile normal to the interface. In the simple isothermal model there is no need to take account of this fact, but in most indusuial chcumstances the two liquids are not in an isothermal system, but in one in which there is a temperature gradient. The simple stationary mass U ansfer model must therefore be replaced by an eddy mass U ansfer which takes account of this surface replenishment. 

The structure/property relationships in materials subjected to shock-wave deformation is physically very difficult to conduct and complex to interpret due to the dynamic nature of the shock process and the very short time of the test. Due to these imposed constraints, most real-time shock-process measurements are limited to studying the interactions of the transmitted waves arrival at the free surface. To augment these in situ wave-profile measurements, shock-recovery techniques were developed in the late 1950s to assess experimentally the residual effects of shock-wave compression on materials. The object of soft-recovery experiments is to examine the terminal structure/property relationships of a material that has been subjected to a known uniaxial shock history, then returned to an ambient pressure... 

J.N. Johnson and L.M. Barker, Dislocation Dynamics and Steady Plastic Wave Profiles in 6061-T6 Aluminum, J. Appl. Phys. 40, 4321-4334 (1969). 

A procedure commonly used to extract dynamic data directly from experimental incoherent neutron scattering profiles is described in Ref. 17. It is assumed that the atomic position vectors can be decomposed into two contributions, one due to diffusive motion, fi /t), and the other from vibrations, Uijt), i.e.. 

---