Power plants fuel types

TJ apid entrainment carbonization of powdered coal under pressure in a partial hydrogen atmosphere was investigated as a means of producing low sulfur char for use as a power plant fuel. Specific objectives of the research were to determine if an acceptable product could be made and to establish the relationship between yields and chemical properties of the char, with special emphasis on type and amount of sulfur compound in the product. The experiments were conducted with a 4-inch diameter by 18-inch high carbonizer according to a composite factorial design (1, 2). Results of the experiments are expressed by empirical mathematical models and are illustrated by the application of response surface analysis. 

The electric power industry uses three types of fossil fuel power plants coal-fired steam, gas turbine, and combined cycle power plants. The most common and widely used is the pulverized coal-fired steam power plant. Fuel oil can be used in place of... 

Base load power plants are also subdivided into four types (1) high efficient combined-cycle plants fueled by natural gas, (2) nuclear power plants, (3) steam power plants fueled primarily by coal, and (4) hydropower plants. 

Most analysts tend to classify the types of applications in a small number of pockets portable, which covers personal electronics and units that have been designed to be moved around UPS systems residential fuel cells power plant fuel cells light-duty FCV fuel cell buses and niche transport, which covers everything that is not a LDV or bus and APUs. 

Another factor is the potential economic benefit that may be realized due to possible future environmental regulations from utilizing both waste and virgin biomass as energy resources. Carbon taxes imposed on the use of fossil fuels in the United States to help reduce undesirable automobile and power plant emissions to the atmosphere would provide additional economic incentives to stimulate development of new biomass energy systems. Certain tax credits and subsidies are already available for commercial use of specific types of biomass energy systems (93). 

Conventional fossil fuel-fired power plants, nuclear power faciUties, cogeneration systems, and combined-cycle faciUties all have one key feature in common some type of steam generator is employed to produce steam. Except for simple-cycle cogeneration faciUties, the steam is used to drive one or... 

Power plant type Fuel Major emissions Vehicle type... 

But for power station applications, the thermal efficiency is not the only measure of the performance of a plant. While a new type of plant may involve some reduction in running costs due to improved thermal efficiency, it may also involve additional capital costs. The cost of electricity produced is the crucial criterion within the overall economics, and this depends not only on the thermal efficiency and capital costs, but also on the price of fuel, operational and maintenance costs, and the taxes imposed. Yet another factor, which has recently become important, is the production by gas turbine plants of greenhouse gases (mainly carbon dioxide) which contribute to global warming. Many countries are now considering the imposition of a special tax on the amount of CO2 produced by a power plant, and this may adversely affect the economics. So consideration of a new plant in future will involve not only the factors listed above but also the amount of CO2 produced per unit of electricity together with the extra taxes that may have to be paid. 

The thermal power plant uses a fired boiler for conversion of fuel to heat. It can be said that there is a design of fired boiler to suit almost all types of fuels, including wastes and vegetable and industrial byproducts. Generally, for oils and gases these can be more readily converted to power in diesels or gas turbines and would not be considered for thermal power plant, unless the station was of significant size. 

The type of power or fuel supply available will influence the decision on prime mover to be used. This is often electric power, but many items of plant such as compressors, generators or works locomotives, will be powered by diesel engines, as will most of the heavy goods vehicles used in and outside the works. 

The enthusiasm for developing DMFCs (the fuel cell researcher s dream) evolved in the 1960s, which was really the boom period for R D activities on all types of fuel cell technologies, mainly because of NASA s vital need for fuel cell power plants for space vehicles. As early as the 1960s it was recognized that the major challenges in developing DMFCs... 

The other types of radioactive materials cited in this section (medical industry and food industry sources) produce significantly lower activity levels than fuel from a nuclear power plant. However, these sources of radioactive materials may be appealing to terrorists because they are far more accessible. Thousands of hospitals, medical treatment facilities, and food industry plants scattered across the U.S. are protected by relatively low levels of security. 

Early expectations of very low emissions and relatively high efficiencies have been met in power plants with each type of fuel cell. Fuel flexibility has been demonstrated using natural gas, propane, landfill gas, anaerobic digester gas, military logistic fuels, and coal gas, greatly expanding market opportunities. Transportation markets worldwide have shown remarkable interest in fuel cells nearly every major vehicle manufacturer in the U.S., Europe, and the Far East is supporting development. 

The steam electric power generation industry is defined as those establishments primarily engaged in the steam generation of electrical energy for distribution and sale. Those establishments produce electricity primarily from a process utilizing fossil-type fuel (coal, oil, or gas) or nuclear fuel in conjunction with a thermal cycle employing the steam-water system as the thermodynamic medium. The industry does not include steam electric power plants in industrial, commercial, or other facilities. The industry in the United States falls under two Standard Industrial Classification (SIC) Codes SIC 4911 and SIC 4931. 

---