Powders physical properties

Gustavo Barbosa-Canovas, Enrique Ortega-Rivas, Pablo Juliano, and Hong YeagFood Powders Physical Properties, Processing, and Functionality (2005)... 

Properties of smokeless powder Physical properties Explosive properties Products of decomposition... 

FIGURE 3.3 Examples of different atomization units, (a) Pressure nozzle, (b) two-fluid nozzle, and (c) mechanical atomizer (atomizing wheel). (Reproduced with permission from Barbosa-Canovas, G. et al., Food Powders. Physical Properties, Processing, and Functionality, Kluwer Academic/Plenmn Publishers, New York, 2005.)... 

Barbosa-Canovas G, Ortega-Rivas E, Juliano P, Yan H (2005) Food Powders. Physical Properties, Processing, and Functionality. Kluwer Academic/Plenum Publishers, New York. 

Barbosa-Canovas, G. V., Ortega-Rivas, E., Juliano, P Yan, H., 2005. Food powders physical properties, processing, and Junctionality. Springer, New York, USA, pp. 199-220. 

The most important polyhydric alcohols are shown in Figure 1. Each is a white soHd, ranging from the crystalline pentaerythritols to the waxy trimethylol alkyls. The trihydric alcohols are very soluble in water, as is ditrimethylol-propane. Pentaerythritol is moderately soluble and dipentaerythritol and tripen taerythritol are less soluble. Table 1 Hsts the physical properties of these alcohols. Pentaerythritol and trimethyl olpropane have no known toxic or irritating effects (1,2). Finely powdered pentaerythritol, however, may form explosive dust clouds at concentrations above 30 g/m in air. The minimum ignition temperature is 450°C (3). 

Lead Iodide. Lead diiodide, Pbl2, forms a powder of yellow hexagonal crystals some physical properties are given in Table 1. Lead diiodide is soluble in alkaUes and potassium iodide, and insoluble in alcohol. It is made by treating a water-soluble lead compound with hydroiodic acid or a soluble metal iodide. It is readily purified by recrystaUization in water. 

Basic Lead Acetate. Basic lead acetate [1335-32-6] (lead subacetate), 2Pb(0H)2-Pb(C2H3 02 )2, is a heavy white powder which is used for sugar analyses. Some physical properties are given in Table 4. Reagent grade is available in 11.3-kg cartons and in 45- and 147-kg fiber dmms. 

During the preformulation stage, the chemical and physical properties of the dmg moiety are studied exhaustively to ensure stabdity, safety, bioavadabdity, and therapeutic efficacy. Tablets are produced directly by compression of powder blends or granulations, which include a small percentage of fine, particle-sized powders. 

Waferboard, a more recent wood constmction product, competes more with plywood than particle board. Waferboard and strand board are bonded with soHd, rather than Hquid, phenoHc resins. Both pulverized and spray-dried, rapid-curing resins have been successfully appHed. Wafers are dried, dusted with powdered resin and wax, and formed on a caul plate. A top caul plate is added and the wafers are bonded in a press at ca 180°C for 5—10 min. Physical properties such as flexural strength, modulus, and internal bond are similar to those of a plywood of equivalent thickness. 

Whereas the production flow charts of inorganic pigments appear to be simple, the actual processes can be very compHcated. Many pigments are not pure chemical compounds, but can be multiphase systems contaminated with various impurities and modifiers. Because pigments are fine powders, the physical properties are as critical to their appHcation performance as are the chemical properties. 

The success of the compaction operation depends pardy on the effective utilization and transmission of appHed forces and pardy on the physical properties and condition of the mixture being compressed. Friction at the die surface opposes the transmission of the appHed pressure in this region, results in unequal distribution of forces within the compact, and hence leads to density and strength maldistribution within the agglomerate (70). Lubricants, both external ones appHed to the mold surfaces and internal ones mixed with the powder, are often used to reduce undesirable friction effects (71). For strong compacts, external lubricants are preferable as they do not interfere with the optimum cohesion of clean particulate surfaces. Binder materials maybe used to improve strength and also to act as lubricants. 

Physical Properties. Sodium metabisulfite (sodium pyrosulfite, sodium bisulfite (a misnomer)), Na2S20, is a white granular or powdered salt (specific gravity 1.48) and is storable when kept dry and protected from air. In the presence of traces of water it develops an odor of sulfur dioxide and in moist air it decomposes with loss of part of its SO2 content and by oxidation to sodium sulfate. Dry sodium metabisulfite is more stable to oxidation than dry sodium sulfite. At low temperatures, sodium metabisulfite forms hydrates with 6 and 7 moles of water. The solubiHty of sodium metabisulfite in water is 39.5 wt % at 20°C, 41.6 wt % at 40°C, and 44.6 wt % at 60°C (340). Sodium metabisulfite is fairly soluble in glycerol and slightly soluble in alcohol. 

Molten sodium is injected into the retort at a prescribed rate and the temperature of the system is controlled by adjusting the furnace power or with external cooling. The variables that control the quaUty and physical properties of the powder are the reduction temperature and its uniformity, diluent type and concentration, sodium feed rate, and stirring efficiency. Optimizing a variable for one powder attribute can adversely affect another property. For example, a high reduction temperature tends to favor improved chemical quaUty but lowers the surface area of the powder. 

Above 40 wt % hydrogen content at room temperature, zirconium hydride is brittle, ie, has no tensile ductiHty, and it becomes more friable with increasing hydrogen content. This behavior and the reversibiHty of the hydride reaction are utilized ki preparing zirconium alloy powders for powder metallurgy purposes by the hydride—dehydride process. The mechanical and physical properties of zirconium hydride, and thek variation with hydrogen content of the hydride, are reviewed in Reference 127. 

The physical properties of elemental boron are significantly affected by purity and crystal form. In addition to being an amorphous powder, boron has four crystalline forms a-rhombohedral, P-rhombohedral, a-tetragonal, and -tetragonal. The a-rhombohedral form has mp 2180°C, sublimes at approximately 3650°C, and has a density of 2.45 g/mL. Amorphous boron, by comparison, has mp 2300°C, sublimes at approximately 2550°C, and has a density of 2.35 g/mL. 

Beneficiation (2,11,12,21—27) iavolves a process or series of processes whereby the chemical and/or physical properties and characteristics of raw materials are modified to render the raw material more processible. The extent of beneficiation is determined by a combination of the starting raw materials, the processiag scheme, the desired properties of the product, and economics. Powder cost iacreases with iacreased beneficiation consequently, low value-added clay raw materials used to produce iaexpensive stmctural clay products typically undergo a minimum of beneficiation, whereas higher value-added alumina powders undergo more extensive beneficiation. 

Physical properties of hexachloroethane are Hsted in Table 11. Hexachloroethane is thermally cracked in the gaseous phase at 400—500°C to give tetrachloroethylene, carbon tetrachloride, and chlorine (140). The thermal decomposition may occur by means of radical-chain mechanism involving -C,C1 -C1, or CCl radicals. The decomposition is inhibited by traces of nitric oxide. Powdered 2inc reacts violentiy with hexachloroethane in alcohoHc solutions to give the metal chloride and tetrachloroethylene aluminum gives a less violent reaction (141). Hexachloroethane is unreactive with aqueous alkali and acid at moderate temperatures. However, when heated with soHd caustic above 200°C or with alcohoHc alkaHs at 100°C, decomposition to oxaHc acid takes place. 

Citric acid, anhydrous, crystallizes from hot aqueous solutions as colorless translucent crystals or white crystalline powder. Its crystal form is monoclinic holohedra. Citric acid is dehquescent in moist air. Some physical properties are given in Table 1 (1 3). The solubiUty of citric acid in water and some organic solvents is given in Table 2. The pH and specific gravity of aqueous solutions of citric acid are shown in Table 3. 

---