Potassium carbonate, reaction with calcium

Use the apparatus detailed in Section 111,20. Dissolve 100 g. (123 ml.) of methyl n-butyl ketone (2-hexanone) (Section 111,152) in 750 ml. of ether and add 150 ml. of water. Introduce 69 g. of clean sodium in the form of wire (or small pieces) as rapidly as possible the reaction must be kept under control and, if necessary, the flask must be cooled in ice or in running water. When all the sodium has reacted, separate the ethereal layer, wash it with 25 ml. of dilute hydrochloric acid (1 1), then with water, dry with anhydrous potassium carbonate or with anhydrous calcium sulphate, and distil through a fractionating column. Collect the fraction of b.p. 136-138°. The yield of methyl n-butyl carbinol (2-hexanol) is 97 g. 

A diagram for one implementation of this process (61,62) is shown in Eigure 11. Recovered potassium sulfate is converted to potassium formate [590-29 ] by reaction with calcium formate [544-17-2] which is made by reacting hydrated lime, Ca(OH)2, and carbon monoxide. The potassium formate (mp 167°C), in hquid form, is recycled to the combustor at about 170°C. Sulfur is removed as soHd calcium sulfate by filtration and then disposed of (see... 

The calcium aluminate cements are not resistant to the attack of alkalis, because the aluminum hydroxide is soluble in the water solutions of sodium and potassium hydroxides, with which the calcium aluminates are also reacting with. The alkali metals carbonates react with calcium aluminate hydrates and these reactions cause destmction of concrete ... 

---