Potassium Membrane

Immerse the exposed wire in the potassium membrane s cocktail contained in a flask of reduced diameter for 2 or 3 s. Take it off quickly from this solution and leave the adhered film to cast in room temperature during 30 min. Repeat this process once more to obtain a membrane with an appropriate thickness. 

Operative lifetimes of the PVC entangled sensor systems so far described are considerably shorter than their solid-state counterparts, e.g. the lanthanum fluoride model. The principal cause is the loss of active component(s) from the polymer matrix. Thus, the deterioration of PVC potassium electrodes relates to the leaching of potassium membranes with an initial resistance of 5.8MD left in contact with deionized water for four days became paler and the resistance rose to 30MD compared with 50MQ for a PVC-only membrane. Similar, but slower, detrimental processes arise with PVC nitrate electrodes (74). 

The ability of living organisms to differentiate between the chemically similar sodium and potassium ions must depend upon some difference between these two ions in aqueous solution. Essentially, this difference is one of size of the hydrated ions, which in turn means a difference in the force of electrostatic (coulombic) attraction between the hydrated cation and a negatively-charged site in the cell membrane thus a site may be able to accept the smaller ion Na (aq) and reject the larger K (aq). This same mechanism of selectivity operates in other ion-selection processes, notably in ion-exchange resins. 

The electrolysis of potassium chloride [7447-40-7] KCl, to produce chlorine and potassium hydroxide in membrane cells requires similar but unique membranes. Commercial membranes currendy employed in high performance membrane electroly2ers include Du Pont s Nafion 900 series and Asahi Glass s Plemion 700 series. 

Chlorine from Potassium Hydroxide Manufacture. One of the coproducts during the electrolytic production of potassium hydroxide employing mercury and membrane ceHs is chlorine. The combined name plate capacity for caustic potash during 1988 totaled 325,000 t/yr and growth of U.S. demand was expected to be steady at 2% through 1990 (68). 

Maleic Anhydride. The ACGIH threshold limit value in air for maleic anhydride is 0.25 ppm and the OSHA permissible exposure level (PEL) is also 0.25 ppm (181). Maleic anhydride is a corrosive irritant to eyes, skin, and mucous membranes. Pulmonary edema (collection of fluid in the lungs) can result from airborne exposure. Skin contact should be avoided by the use of mbber gloves. Dust respirators should be used when maleic anhydride dust is present. Maleic anhydride is combustible when exposed to heat or flame and can react vigorously on contact with oxidizers. The material reacts exothermically with water or steam. Violent decompositions of maleic anhydride can be catalyzed at high temperature by strong bases (sodium hydroxide, potassium hydroxide, calcium hydroxide, alkaU metals, and amines). Precaution should be taken during the manufacture and use of maleic anhydride to minimize the presence of basic materials. 

No toxicological studies have been reported on the triple salt. However, because of the common confusion of this compound with potassium hydrogen monoperoxosulfate monohydrate, it is possible that the pubHshed descriptions of the toxic properties of this latter compound actually refer to the triple salt. If this is so, then the triple salt must be regarded as toxic and irritating to skin, eyes, and mucous membranes (2). 

Potassium hydrogen monoperoxosulfate monohydrate [14696-73-2] KHSO 20, related to the triple salt, is not made commercially. The crystal stmcture has been determined and some features of its Raman and ir spectra recorded (69). This compound is more stable under x-rays than the triple salt. The 0—0 distance is 0.1460 nm. The dihedral angle of the 0—0 moiety is about 90°, similar to that ia soHd hydrogea peroxide. This compouad is reported as toxic and irritating to eyes, skin, and mucous membranes (2). Although undoubtedly correct, this description probably better relates to the triple salt. 

Potassium forms corrosive potassium hydroxide and Hberates explosive hydrogen gas upon reaction with water and moisture. Airborne potassium dusts or potassium combustion products attack mucous membranes and skin causing bums and skin cauterization. Inhalation and skin contact must be avoided. Safety goggles, full face shields, respirators, leather gloves, fire-resistant clothing, and a leather apron are considered minimum safety equipment. 

Soluble Sta.nna.tes, Many metal staimates of formula M Sn(OH) are known. The two main commercial products are the soluble sodium and potassium salts, which are usually obtained by recovery from the alkaline detinning process. They are also produced by the fusion of stannic oxide with sodium hydroxide or potassium carbonate, respectively, followed by leaching and by direct electrolysis of tin metal in the respective caustic solutions in cells using cation-exchange membranes (27). Another route is the recovery from plating sludges. 

The Ionic Basis of Membrane Activity. Almost all living cells maintain specific internal chemical environments that ate different from their external environments. In cardiac cells the principal ions involved in maintaining membrane activity are sodium, Na" potassium, K" chloride, CU and calcium, Ca ". The internal (i) and external (o) concentrations of these ions are Na" = 140 mM, Na" = 30 mM = 4 mM, = 140 mM Cl ... 

The resting membrane potential of most excitable cells is around —60 to —80 mV. This gradient is maintained by the activity of various ion channels. When the potassium channels of the cell open, potassium efflux occurs and hyperpolari2ation results. This decreases calcium channel openings, which ia turn preveats the influx of calcium iato the cell lea ding to a decrease ia iatraceUular calcium ia the smooth muscles of the vasculature. The vascular smooth muscles thea relax and the systemic blood pressure faUs. 

The primary routes of entry for animal exposure to chromium compounds are inhalation, ingestion, and, for hexavalent compounds, skin penetration. This last route is more important in industrial exposures. Most hexavalent chromium compounds are readily absorbed, are more soluble than trivalent chromium in the pH range 5 to 7, and react with cell membranes. Although hexavalent compounds are more toxic than those of Cr(III), an overexposure to compounds of either oxidation state may lead to inflammation and irritation of the eyes, skin, and the mucous membranes associated with the respiratory and gastrointestinal tracts. Skin ulcers and perforations of nasal septa have been observed in some industrial workers after prolonged exposure to certain hexavalent chromium compounds (108—110), ie, to chromic acid mist or sodium and potassium dichromate. 

H-Benzo[a]carbazole, 4,4a,5,l 1,1 la,l Ib-hexahydro-synthesis, 4, 283 Benzo[b]carbazole, N-acetyl-photochemical rearrangements, 4, 204 Benzo[/]chroman-4-one, 9-hydroxy-2,2-dimethyl-synthesis, 3, 851 Benzochromanones synthesis, 3, 850, 851, 855 Benzochromones synthesis, 3, 821 Benzocinnoline-N-imide ring expansion, 7, 255 Benzocinnolines synthesis, 2, 69, 75 UV, 2, 127 Benzocoumarins synthesis, 3, 810 Benzo[15]crown-5 potassium complex crystal stmcture, 7, 735 sodium complex crystal stmcture, 7, 735 Benzo[ 18]cr own-6 membrane transport and, 7, 756 Benzo[b]cyclohepta[d]furans synthesis, 4, 106 Benzocycloheptathi azoles synthesis, 5, 120... 

Figure 12.9 Schematic diagram of the stmc-ture of a potassium channel viewed perpendicular to the plane of the membrane. The molecule is tetrameric with a hole in the middle that forms the ion pore (purple). Each subunit forms two transmembrane helices, the inner and the outer helix. The pore heJix and loop regions build up the ion pore in combination with the inner helix. (Adapted from S.A. Doyle et al., Science 280 69-77, 1998.)...

Figure 12.11 Schematic diagram of the ion pore of the K+ channel. From the cytosolic side the pore begins as a water-filled channel that opens up into a water-filled cavity near the middle of the membrane. A narrow passage, the selectivity filter, links this cavity to the external solution. Three potassium ions (purple spheres) bind in the pore. The pore helices (red) are oriented such that their carboxyl end (with a negative dipole moment) is oriented towards the center of the cavity to provide a compensating dipole charge to the K ions. (Adapted from D.A. Doyle et al.. Science 280 69-77, 1998.)...

According to U.S. Patent 2,966,493, the 2,3-bis-(3-pyridyl)-2,3-butanedlol used as the starting material may be prepared as follows. A solution of 1,430 g of 3-acetyl-pyridine in 7,042 ml of a 1 N aqueous solution of potassium hydroxide is placed into a cathode chamber containing a mercury cathode with a surface of 353 cm and is separated from an anode chamber by an Alundum membrane. As anode a platinum wire is used and the anolyte consists of a 1 N solution of aqueous potassium hydroxide which Is replenished from time to time. 

When paint films are immersed in water or solutions of electrolytes they acquire a charge. The existence of this charge is based on the following evidence. In a junction between two solutions of potassium chloride, 0 -1 N and 0 01 N, there will be no diffusion potential, because the transport numbers of both the and the Cl" ions are almost 0-5. If the solutions are separated by a membrane equally permeable to both ions, there will still be no diffusion potential, but if the membrane is more permeable to one ion than to the other a diffusion potential will arise it can be calculated from the Nernst equation that when the membrane is permeable to only one ion, the potential will have the value of 56 mV. 

---